GMPLS-LSR-STD-MIB Table View

This table specifies per-interface GMPLS capability and
associated information.  It extends the information in the
mplsInterfaceTable of MPLS-LSR-STD-MIB through a
sparse augmentation relationship.

gmplsInterfaceEntry row .1.3.6.1.2.1.10.166.15.1.1.1

A conceptual row in this table is created automatically by an
LSR for each interface that is both capable of supporting
GMPLS and configured to support GMPLS. Note that
support of GMPLS is not limited to control plane …

Indexes

MPLS-LSR-STD-MIBmplsInterfaceIndex

Column	Syntax	OID
gmplsInterfaceSignalingCaps Defines the signaling capabilities on this interface. Multiple bits may legitimately be set at once, but if 'unknown' is set then no other bit may be set. Setting no bits implies that GMPLS signaling cannot be perform…	Bitsr/w Enumerated Values: 0 unknown 1 rsvpGmpls 2 crldpGmpls 3 otherGmpls	.1.3.6.1.2.1.10.166.15.1.1.1.1
gmplsInterfaceRsvpHelloPeriod Period, in milliseconds, between sending Resource Reservation Protocol (RSVP) Hello messages on this interface. A value of 0 indicates that no Hello messages should be sent on this interface. This object…	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.15.1.1.1.2

This table sparse augments the mplsInSegmentTable of
MPLS-LSR-STD-MIB to provide GMPLS-specific information about
incoming segments to an LSR.

gmplsInSegmentEntry row .1.3.6.1.2.1.10.166.15.1.2.1

An entry in this table extends the representation of an incoming
segment represented by an entry in the mplsInSegmentTable in

MPLS-LSR-STD-MIB through a sparse augmentation. An entry can be
created by a ne…

Indexes

MPLS-LSR-STD-MIBmplsInSegmentIndex

Column	Syntax	OID
gmplsInSegmentDirection This object indicates the direction of data flow on this segment. This object cannot be modified if mplsInSegmentRowStatus for the corresponding entry in the mplsInSegmentTable is active(1).	GMPLS-TC-STD-MIBGmplsSegmentDirectionTCr/w Type Values: 1 forward 2 reverse	.1.3.6.1.2.1.10.166.15.1.2.1.1
gmplsInSegmentExtraParamsPtr Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchronous Optical Network (SONET) resource usage). Such can be supplied from an external table a…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.15.1.2.1.2

This table sparse augments the mplsOutSegmentTable of
MPLS-LSR-STD-MIB to provide GMPLS-specific information about
outgoing segments from an LSR.

gmplsOutSegmentEntry row .1.3.6.1.2.1.10.166.15.1.3.1

An entry in this table extends the representation of an outgoing
segment represented by an entry in the mplsOutSegmentTable of
MPLS-LSR-STD-MIB through a sparse augmentation. An entry can be
created by a network admini…

Indexes

MPLS-LSR-STD-MIBmplsOutSegmentIndex

Column	Syntax	OID
gmplsOutSegmentDirection This object indicates the direction of data flow on this segment. This object cannot be modified if mplsOutSegmentRowStatus for the corresponding entry in the mplsOutSegmentTable is active(1).	GMPLS-TC-STD-MIBGmplsSegmentDirectionTCr/w Type Values: 1 forward 2 reverse	.1.3.6.1.2.1.10.166.15.1.3.1.1
gmplsOutSegmentTTLDecrement This object indicates the amount by which to decrement the Time to Live (TTL) of any payload packets forwarded on this segment if per-hop decrementing is being done. A value of zero indicates that no decr…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.15.1.3.1.2
gmplsOutSegmentExtraParamsPtr Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, SONET resource usage). Such can be supplied from an external table and referenced from here. …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.15.1.3.1.3