GMPLS-LSR-STD-MIB
Copyright (C) The IETF Trust (2007). This version of
this MIB module is part of RFC 4803; see the RFC itself for
full legal notices.
This MIB module contains managed object definitions for the
Generalized Multiprotocol (GMPLS) Label Switching Router as
defined in Generalized Multi-Protocol Label Switching (GMPLS)
Architecture, Mannie et al., RFC 3945, October 2004.
- Source file
GMPLS-LSR-STD-MIB- Last revised
- Identity
gmplsLsrStdMIB- Base OID
1.3.6.1.2.1.10.166.15
Imported Objects
| GMPLS-TC-STD-MIB | GmplsSegmentDirectionTC |
| IF-MIB | ifCounterDiscontinuityGroup (no object page) ifGeneralInformationGroup (no object page) |
| MPLS-LSR-STD-MIB | mplsInSegmentGroup (no object page) mplsInSegmentIndex mplsInterfaceGroup (no object page) mplsInterfaceIndex mplsLsrNotificationGroup (no object page) mplsOutSegmentGroup (no object page) mplsOutSegmentIndex mplsPerfGroup (no object page) mplsXCGroup (no object page) |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'GMPLS-LSR-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GMPLS-LSR-STD-MIB::gmplsLsrStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GMPLS-LSR-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GMPLS-LSR-STD-MIB::gmplsLsrStdMIB'
Objects (18)
Showing 18 of 18 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.166.15 |
||
.1.3.6.1.2.1.10.166.15.1 |
||
.1.3.6.1.2.1.10.166.15.1.1 |
||
.1.3.6.1.2.1.10.166.15.1.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.10.166.15.1.1.1.1 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.166.15.1.1.1.2 |
|
.1.3.6.1.2.1.10.166.15.1.2 |
||
.1.3.6.1.2.1.10.166.15.1.2.1 |
||
.1.3.6.1.2.1.10.166.15.1.2.1.1 |
||
.1.3.6.1.2.1.10.166.15.1.2.1.2 |
||
.1.3.6.1.2.1.10.166.15.1.3 |
||
.1.3.6.1.2.1.10.166.15.1.3.1 |
||
.1.3.6.1.2.1.10.166.15.1.3.1.1 |
||
.1.3.6.1.2.1.10.166.15.1.3.1.2 |
||
.1.3.6.1.2.1.10.166.15.1.3.1.3 |
||
.1.3.6.1.2.1.10.166.15.2 |
||
.1.3.6.1.2.1.10.166.15.2.1 |
||
.1.3.6.1.2.1.10.166.15.2.2 |
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- MPLS-TC-STD-MIBrfc
- GMPLS-TC-STD-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- INET-ADDRESS-MIBrfc
- MPLS-LSR-STD-MIBrfc
- GMPLS-LSR-STD-MIBrfcselected
Conformance Groups (3)
|
Collection of objects that provide additional
information for an MPLS interface and are needed for GMPLS interface configuration and performance information. |
.1.3.6.1.2.1.10.166.15.2.1.1
|
|
|
Collection of objects that provide additional
information for an MPLS in-segment and are needed for GMPLS in-segment configuration and performance information. |
.1.3.6.1.2.1.10.166.15.2.1.2
|
|
|
Collection of objects that provide additional
information for an MPLS out-segment and are needed for GMPLS out-segment configuration and performance information. |
.1.3.6.1.2.1.10.166.15.2.1.3
|
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.166.15.2.2.1Compliance statement for agents that provide full support for
GMPLS-LSR-STD-MIB.
The mandatory group has to be implemented by all LSRs that
originate, terminate, or act as transit for TE-LSPs/tunnels.
In addition, depending on the type of tunnels supported, other
groups become mandatory as explained below.
GMPLS-LSR-STD-MIB.
The mandatory group has to be implemented by all LSRs that
originate, terminate, or act as transit for TE-LSPs/tunnels.
In addition, depending on the type of tunnels supported, other
groups become mandatory as explained below.
Required groups
| mandatory | IF-MIB::ifGeneralInformationGroup | |
| mandatory | IF-MIB::ifCounterDiscontinuityGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsInterfaceGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsInSegmentGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsOutSegmentGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsXCGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsPerfGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsLsrNotificationGroup | |
| mandatory | gmplsInterfaceGroup | |
| mandatory | gmplsInSegmentGroup | |
| mandatory | gmplsOutSegmentGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| gmplsInSegmentDirection | readonly | The only valid value for unidirectional LSPs is forward(1). | |
| gmplsOutSegmentDirection | readonly | The only valid value for unidirectional LSPs is forward(1). | |
| gmplsOutSegmentTTLDecrement | readonly | Write access is not required. | |
| gmplsInSegmentExtraParamsPtr | readonly | Write access is not required. | |
| gmplsOutSegmentExtraParamsPtr | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.10.166.15.2.2.2Compliance requirement for implementations that only provide
read-only support for GMPLS-LSR-STD-MIB. Such devices can then
be monitored but cannot be configured using this MIB module.
read-only support for GMPLS-LSR-STD-MIB. Such devices can then
be monitored but cannot be configured using this MIB module.
Required groups
| mandatory | IF-MIB::ifGeneralInformationGroup | |
| mandatory | IF-MIB::ifCounterDiscontinuityGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsInterfaceGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsInSegmentGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsOutSegmentGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsXCGroup | |
| mandatory | MPLS-LSR-STD-MIB::mplsPerfGroup | |
| mandatory | gmplsInterfaceGroup | |
| mandatory | gmplsInSegmentGroup | |
| mandatory | gmplsOutSegmentGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| gmplsInterfaceSignalingCaps | readonly | Write access is not required. | |
| gmplsInterfaceRsvpHelloPeriod | readonly | Write access is not required. | |
| gmplsInSegmentDirection | readonly | The only valid value for unidirectional LSPs is forward(1). | |
| gmplsInSegmentExtraParamsPtr | readonly | Write access is not required. | |
| gmplsOutSegmentDirection | readonly | The only valid value for unidirectional LSPs is forward(1). | |
| gmplsOutSegmentTTLDecrement | readonly | Write access is not required. | |
| gmplsOutSegmentExtraParamsPtr | readonly | Write access is not required. |