GENERIC-3COM-VLAN-MIB-1-0-7 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
19

a3ComVlanGlobalMappingTable

table mandatory
.1.3.6.1.4.1.43.10.1.14.1.1 · 1 row entry · 2 columns
Open in standard view 
This table lists VLAN interfaces that are globally
identified.  A single entry exists in this list for each
VLAN interface in the system that is bound to a global
identifier.
a3ComVlanGlobalMappingEntry entry .1.3.6.1.4.1.43.10.1.14.1.1.1
An individual VLAN interface global mapping entry.
Entries in this table are created by setting the
a3ComVlanIfGlobalIdentifier object in the
a3ComVlanIfTable to a non-zero value.
Indexes
a3ComVlanGlobalMappingIdentifier
Column Syntax OID
a3ComVlanGlobalMappingIdentifier mandatory
An index into the a3ComVlanGlobalMappingTable and an
administratively assigned global VLAN identifier. The
value of this object globally identifies the VLAN interface.
For VLAN interfaces, on different network devices,…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43.10.1.14.1.1.1.1
a3ComVlanGlobalMappingIfIndex mandatory
The value of a3ComVlanIfIndex for the VLAN interface in the
a3ComVlanIfTable, which is bound to the global identifier
specified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.10.1.14.1.1.1.2

a3ComVlanIfTable

table mandatory
.1.3.6.1.4.1.43.10.1.14.1.2 · 1 row entry · 7 columns
Open in standard view 
This table lists VLAN interfaces that exist within
a device.  A single entry exists in this list for each
VLAN interface in the system.  A VLAN interface may
be created, destroyed and/or mapped to a globally 
identified vlan.
a3ComVlanIfEntry entry .1.3.6.1.4.1.43.10.1.14.1.2.1
An individual VLAN interface entry. When an NMS wishes
to create a new entry in this table, it must obtain a
non-zero index from the a3ComNextAvailableVirtIfIndex
object. Row creation in this table will fail if the
c…
Indexes
a3ComVlanIfIndex
Column Syntax OID
a3ComVlanIfIndex mandatory
The index value of this row and the vlan's ifIndex in the
ifTable. The NMS obtains the index value for this row by
reading the a3ComNextAvailableVirtIfIndex object.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.10.1.14.1.2.1.1
a3ComVlanIfDescr mandatory
This is a description of the VLAN interface.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.43.10.1.14.1.2.1.2
a3ComVlanIfType mandatory
The VLAN interface type.
A3ComVlanTyper/w
Textual Convention: A3ComVlanType Enumeration
Type Values:
1vlanLayer2
2vlanUnspecifiedProtocols
3vlanIPProtocol
4vlanIPXProtocol
5vlanAppleTalkProtocol
6vlanXNSProtocol
7vlanISOProtocol
8vlanDECNetProtocol
9vlanNetBIOSProtocol
10vlanSNAProtocol
11vlanVINESProtocol
12vlanX25Protocol
13vlanIGMPProtocol
14vlanSessionLayer
15vlanNetBeui
16vlanLayeredProtocols
17vlanIPXIIProtocol
18vlanIPX8022Protocol
19vlanIPX8023Protocol
20vlanIPX8022SNAPProtocol
 .1.3.6.1.4.1.43.10.1.14.1.2.1.3
a3ComVlanIfGlobalIdentifier mandatory
An administratively assigned global VLAN identifier. For
VLAN interfaces, on different network devices, which are
part of the same globally identified VLAN, the value of this
object will be the same.

T…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43.10.1.14.1.2.1.4
a3ComVlanIfInfo mandatory
A TLV encoded information string for the VLAN interface.
The information contained within this string corresponds
to VLAN information not contained within this table, but
contained elsewhere within this MIB module. The…
OctetString .1.3.6.1.4.1.43.10.1.14.1.2.1.5
a3ComVlanIfStatus mandatory
The status column for this VLAN interface.
This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
notInService(2)
not…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.10.1.14.1.2.1.6
a3ComVlanIfModeType mandatory
The VLAN mode type for this interface.
This object can be set to:

usedefault(1)
open(2)
closed(3)

UseDefault Vlans: uses the bridge Vlan Mode value. The bridge V…
A3ComVlanModeTyper/w
Textual Convention: A3ComVlanModeType Enumeration
Type Values:
1vlanUseDefault
2vlanOpen
3vlanClosed
 .1.3.6.1.4.1.43.10.1.14.1.2.1.7

a3ComIpVlanTable

table mandatory
.1.3.6.1.4.1.43.10.1.14.2.1 · 1 row entry · 3 columns
Open in standard view 
A list of IP VLAN interface information
entries.  Entries in this table are related
to entries in the a3ComVlanIfTable by using the
same index.
a3ComIpVlanEntry entry .1.3.6.1.4.1.43.10.1.14.2.1.1
A a3ComIpVlanEntry contains layer 3
information about a particular IP VLAN
interface. Note entries in this table
cannot be deleted until the entries in
the ifStackTable that produce overlap
are removed.
Indexes
a3ComVlanIfIndex
Column Syntax OID
a3ComIpVlanIpNetAddress mandatory
The IP network number for the IP VLAN interface defined
in the a3ComVlanIfTable identified with the same index.
The IpNetAdress and the IpNetMask must be set and the
the row creation process completed by a NMS before
ov…
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.10.1.14.2.1.1.1
a3ComIpVlanIpNetMask mandatory
The IP network mask corresponding to the IP Network
address defined by a3ComIpVlanIpNetAddress. The
IpNetAdress and the IpNetMask must be set and the
row creation process completed by a NMS before
overlapping rows in …
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.10.1.14.2.1.1.2
a3ComIpVlanStatus mandatory
The status column for this IP VLAN entry.
This object can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
notInService(2)
notRe…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.10.1.14.2.1.1.3

a3ComVlanProtocolTable

table mandatory
.1.3.6.1.4.1.43.10.1.14.2.2 · 1 row entry · 3 columns
Open in standard view 
This table lists the configured protocols per Vlan.  A
single entry exists in this list for each protocol
configured on a VLAN interface.  The a3ComVlanIfType
object in a3ComVlanIfTable has to be set to 
vlanLayeredProtocols in order to use this table.
a3ComVlanProtocolEntry entry .1.3.6.1.4.1.43.10.1.14.2.2.1
A a3ComVlanProtocolEntry contains a single VLAN to protocol
entry.
Indexes
a3ComVlanProtocolIfIndex a3ComVlanProtocolIndex
Column Syntax OID
a3ComVlanProtocolIfIndex mandatory
The first indice of this row and the vlan's ifIndex in the
ifTable. The value of this object is the same as the
corresponding a3ComVlanIfIndex in the a3ComVlanTable.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.10.1.14.2.2.1.1
a3ComVlanProtocolIndex mandatory
The second indice of this row, which identifies one of
possible many protocols associated with the VLAN interface
identified by this entries first indice. The values are
based on the layer 3 protocols specified in A3Co…
A3ComVlanLayer3Type
Textual Convention: A3ComVlanLayer3Type Enumeration
Type Values:
1vlanIPProtocol
2vlanIPXProtocol
3vlanAppleTalkProtocol
4vlanXNSProtocol
5vlanSNAProtocol
6vlanDECNetProtocol
7vlanNetBIOSProtocol
8vlanVINESProtocol
9vlanX25Protocol
10vlanIPXIIProtocol
11vlanIPX8022Protocol
12vlanIPX8023Protocol
13vlanIPX8022SNAPProtocol
 .1.3.6.1.4.1.43.10.1.14.2.2.1.2
a3ComVlanProtocolStatus mandatory
The status column for this VLAN interface.
This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
not…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.10.1.14.2.2.1.3

a3ComVlanEncapsIfTable

table mandatory
.1.3.6.1.4.1.43.10.1.14.4.1 · 1 row entry · 4 columns
Open in standard view 
This table lists VLAN encapsulation interfaces that
exist within a device.  A single entry exists in this
list for each VLAN encapsulation interface in the
system.  A VLAN encapsulation interface may be created
or destroyed.
a3ComVlanEncapsIfEntry entry .1.3.6.1.4.1.43.10.1.14.4.1.1
An individual VLAN encapsulation interface entry.
When an NMS wishes to create a new entry in this table,
it must obtain a non-zero index from the
a3ComNextAvailableVirtIfIndex object. Row creation in
this table will …
Indexes
a3ComVlanEncapsIfIndex
Column Syntax OID
a3ComVlanEncapsIfIndex mandatory
The index value of this row and the encapsulation
interface's ifIndex in the ifTable. The NMS obtains
the index value used for creating a row in this table
by reading the a3ComNextAvailableVirtIfIndex object.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.10.1.14.4.1.1.1
a3ComVlanEncapsIfType mandatory
The encapsulation algorithm used when encapsulating
packets transmitted, or de-encapsulating packets
received through this interface.
A3ComVlanEncapsTyper/w
Textual Convention: A3ComVlanEncapsType Enumeration
Type Values:
1vlanEncaps3ComProprietaryVLT
2vlanEncaps8021q
3vlanEncapsPre8021qONcore
 .1.3.6.1.4.1.43.10.1.14.4.1.1.2
a3ComVlanEncapsIfTag mandatory
The tag used when encapsulating packets transmitted,
or de-encapsulating packets received through this
interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.10.1.14.4.1.1.3
a3ComVlanEncapsIfStatus mandatory
The row status for this VLAN encapsulation interface.

This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.10.1.14.4.1.1.4