GBOND-MIB
The objects in this MIB module are used to manage the
multi-pair bonded xDSL interfaces, as defined in ITU-T
Recommendations G.998.1, G.998.2, and G.998.3.
This MIB module MUST be used in conjunction with a bonding
scheme-specific MIB module, that is, G9981-MIB, G9982-MIB,
or G9983-MIB.
The following references are used throughout this MIB module:
[G.998.1] refers to:
ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
January 2005.
[G.998.2] refers to:
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005.
[G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005.
[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.
Naming Conventions:
BCE - Bonding Channel Entity
BTU - Bonding Terminating Unit
BTU-C - Bonding Terminating Unit, CO side
BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sub-layer
PM - Performance Monitoring
SNR - Signal to Noise Ratio
TCA - Threshold Crossing Alert
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
GBOND-MIB- Last revised
- Identity
gBondMIB- Base OID
1.3.6.1.2.1.211
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfCurrentCount HCPerfIntervalCount HCPerfIntervalThreshold HCPerfInvalidIntervals HCPerfTimeElapsed HCPerfTotalCount HCPerfValidIntervals |
| IANA-GBOND-TC-MIB | IANAgBondScheme IANAgBondSchemeList |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Gauge32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | PhysAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'GBOND-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GBOND-MIB::gBondMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GBOND-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBOND-MIB::gBondMIB'
Objects (82)
Showing 82 of 82 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.211 |
||
.1.3.6.1.2.1.211.1 |
||
.1.3.6.1.2.1.211.1.1 |
||
.1.3.6.1.2.1.211.1.1.0 |
||
.1.3.6.1.2.1.211.1.1.1 |
||
.1.3.6.1.2.1.211.1.1.1.1 |
||
.1.3.6.1.2.1.211.1.1.1.1.1 |
||
.1.3.6.1.2.1.211.1.1.1.1.10 |
||
.1.3.6.1.2.1.211.1.1.1.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.211.1.1.1.1.3 |
|
|
KbpsUnsigned32
|
.1.3.6.1.2.1.211.1.1.1.1.4 |
|
|
KbpsUnsigned32
|
.1.3.6.1.2.1.211.1.1.1.1.5 |
|
|
KbpsUnsigned32
|
.1.3.6.1.2.1.211.1.1.1.1.6 |
|
|
KbpsUnsigned32
|
.1.3.6.1.2.1.211.1.1.1.1.7 |
|
.1.3.6.1.2.1.211.1.1.1.1.8 |
||
|
OctetString
|
.1.3.6.1.2.1.211.1.1.1.1.9 |
|
.1.3.6.1.2.1.211.1.1.2 |
||
.1.3.6.1.2.1.211.1.1.2.1 |
||
.1.3.6.1.2.1.211.1.1.2.1.1 |
||
.1.3.6.1.2.1.211.1.1.2.1.2 |
||
|
Unsigned32
|
.1.3.6.1.2.1.211.1.1.2.1.3 |
|
|
Unsigned32
|
.1.3.6.1.2.1.211.1.1.2.1.4 |
|
.1.3.6.1.2.1.211.1.1.3 |
||
.1.3.6.1.2.1.211.1.1.3.1 |
||
.1.3.6.1.2.1.211.1.1.3.1.1 |
||
.1.3.6.1.2.1.211.1.1.3.1.2 |
||
.1.3.6.1.2.1.211.1.1.3.1.3 |
||
.1.3.6.1.2.1.211.1.1.3.1.4 |
||
|
Bits
|
.1.3.6.1.2.1.211.1.1.3.1.5 |
|
|
Enumeration
|
.1.3.6.1.2.1.211.1.1.3.1.6 |
|
|
Unsigned32
|
.1.3.6.1.2.1.211.1.1.3.1.7 |
|
.1.3.6.1.2.1.211.1.1.4 |
||
.1.3.6.1.2.1.211.1.1.4.1 |
||
.1.3.6.1.2.1.211.1.1.4.1.1 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.1 |
||
|
daysUnsigned32
|
.1.3.6.1.2.1.211.1.1.4.1.1.10 |
|
|
daysUnsigned32
|
.1.3.6.1.2.1.211.1.1.4.1.1.11 |
|
.1.3.6.1.2.1.211.1.1.4.1.1.12 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.13 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.14 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.15 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.2 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.3 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.4 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.5 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.6 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.7 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.8 |
||
.1.3.6.1.2.1.211.1.1.4.1.1.9 |
||
.1.3.6.1.2.1.211.1.1.4.2 |
||
.1.3.6.1.2.1.211.1.1.4.2.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.211.1.1.4.2.1.1 |
|
.1.3.6.1.2.1.211.1.1.4.2.1.2 |
||
.1.3.6.1.2.1.211.1.1.4.2.1.3 |
||
.1.3.6.1.2.1.211.1.1.4.2.1.4 |
||
.1.3.6.1.2.1.211.1.1.4.2.1.5 |
||
.1.3.6.1.2.1.211.1.1.4.2.1.6 |
||
.1.3.6.1.2.1.211.1.1.4.3 |
||
.1.3.6.1.2.1.211.1.1.4.3.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.211.1.1.4.3.1.1 |
|
.1.3.6.1.2.1.211.1.1.4.3.1.2 |
||
.1.3.6.1.2.1.211.1.1.4.3.1.3 |
||
.1.3.6.1.2.1.211.1.1.4.3.1.4 |
||
.1.3.6.1.2.1.211.1.1.4.3.1.5 |
||
.1.3.6.1.2.1.211.1.1.4.3.1.6 |
||
.1.3.6.1.2.1.211.1.1.4.4 |
||
.1.3.6.1.2.1.211.1.1.4.4.1 |
||
|
OctetString
|
.1.3.6.1.2.1.211.1.1.4.4.1.1 |
|
.1.3.6.1.2.1.211.1.1.4.4.1.2 |
||
.1.3.6.1.2.1.211.1.1.4.4.1.3 |
||
.1.3.6.1.2.1.211.1.1.4.4.1.4 |
||
|
secondsGBondPm1DayIntervalThreshold
|
.1.3.6.1.2.1.211.1.1.4.4.1.5 |
|
|
secondsGBondPm1DayIntervalThreshold
|
.1.3.6.1.2.1.211.1.1.4.4.1.6 |
|
|
secondsGBondPm1DayIntervalThreshold
|
.1.3.6.1.2.1.211.1.1.4.4.1.7 |
|
.1.3.6.1.2.1.211.1.1.4.4.1.8 |
||
.1.3.6.1.2.1.211.1.2 |
||
.1.3.6.1.2.1.211.1.2.1 |
||
.1.3.6.1.2.1.211.1.2.1.1 |
||
|
OctetString
|
.1.3.6.1.2.1.211.1.2.1.1.1 |
|
.1.3.6.1.2.1.211.2 |
||
.1.3.6.1.2.1.211.2.1 |
||
.1.3.6.1.2.1.211.2.2 |
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- HC-PerfHist-TC-MIBrfc
- IANA-GBOND-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- GBOND-MIBrfcselected
Type Definitions (1)
| Unsigned32 |
range: 0..86400 |
Conformance Groups (10)
Compliance Statements (1)
OID
.1.3.6.1.2.1.211.2.2.1The compliance statement for G.Bond interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
Compliance with the following external compliance statements
is OPTIONAL for implementations supporting bonding with
flexible cross-connect between the GBS and BCE ports:
MIB Module Compliance Statement
---------- --------------------
IF-INVERTED-STACK-MIB ifInvCompliance
IF-CAP-STACK-MIB ifCapStackCompliance
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
Compliance with the following external compliance statements
is OPTIONAL for implementations supporting bonding with
flexible cross-connect between the GBS and BCE ports:
MIB Module Compliance Statement
---------- --------------------
IF-INVERTED-STACK-MIB ifInvCompliance
IF-CAP-STACK-MIB ifCapStackCompliance
Required groups
| mandatory | gBondBasicGroup | |
| mandatory | gBondTcaConfGroup | |
| mandatory | gBondTcaNotificationGroup | |
| optional | gBondDiscoveryGroup |
Support for this group is only required for implementations supporting the G.Bond Discovery function. |
| optional | gBondMultiSchemeGroup |
Support for this group is only required for implementations supporting multiple bonding schemes. |
| optional | gBondPmCurGroup |
Support for this group is only required for implementations supporting Performance Monitoring. |
| optional | gBondPm15MinGroup |
Support for this group is only required for implementations supporting 15-minute historical Performance Monitoring. |
| optional | gBondPm1DayGroup |
Support for this group is only required for implementations supporting 1-day historical Performance Monitoring. |
| optional | gBondPmTcaConfGroup |
Support for this group is only required for implementations supporting Performance Monitoring Threshold Crossing Alert notifications. |
| optional | gBondPmTcaNotificationGroup |
Support for this group is only required for implementations supporting Performance Monitoring Threshold Crossing Alert notifications. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| gBondPortCapSchemesSupported | Support for all bonding scheme types is not required. However, at least one value SHALL be supported. |
||
| gBondPortCapPeerSchemesSupported | Support for all bonding scheme types is not required. However, at least one value SHALL be supported. |
Notifications / Traps (8)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.211.1.1.0.1 |
This notification indicates that the G.Bond port's upstream
data rate has reached/dropped below or exceeded the low upstream rate threshold, specified by gBondPortConfThreshLowUpRate. This notification MAY be sent for the -O subtype ports while the port is 'up', on the crossing event in both directions: from normal (rate is above the threshold) to low (rate equals the threshold or is below it) and from low to normal. This notification is not applicable to the -R subtypes. It is RECOMMENDED that a small debouncing period of 2.5 sec, between the detection of the condition and notification, be implemented to prevent simultaneous LinkUp/LinkDown and gBondLowUpRateCrossing notifications from being sent. The adaptive nature of the G.Bond technology allows the port to adapt itself to the changes in the copper environment; e.g., an impulse noise, alien crosstalk, or a micro-interruption may temporarily drop one or more BCEs in the aggregation group, causing a rate degradation of the aggregated G.Bond link. The dropped BCEs would then try to re-initialize, possibly at a lower rate than before, adjusting the rate to provide the required target SNR margin. Generation of this notification is controlled by the gBondPortConfLowRateCrossingEnable object. This object maps to the TR-159 notification nGroupLowUpRateCrossing. |
|
.1.3.6.1.2.1.211.1.1.0.2 |
This notification indicates that the G.Bond port's downstream
data rate has reached/dropped below or exceeded the low downstream rate threshold, specified by gBondPortConfThreshLowDnRate. This notification MAY be sent for the -O subtype ports while the port is 'up', on the crossing event in both directions: from normal (rate is above the threshold) to low (rate equals the threshold or is below it) and from low to normal. This notification is not applicable to the -R subtypes. It is RECOMMENDED that a small debouncing period of 2.5 sec, between the detection of the condition and notification, be implemented to prevent simultaneous LinkUp/LinkDown and gBondLowDnRateCrossing notifications from being sent. The adaptive nature of the G.Bond technology allows the port to adapt itself to the changes in the copper environment; e.g., an impulse noise, alien crosstalk, or a micro-interruption may temporarily drop one or more BCEs in the aggregation group, causing a rate degradation of the aggregated G.Bond link. The dropped BCEs would then try to re-initialize, possibly at a lower rate than before, adjusting the rate to provide the required target SNR margin. Generation of this notification is controlled by the gBondPortConfLowRateCrossingEnable object. This object maps to the TR-159 notification nGroupLowDownRateCrossing. |
|
.1.3.6.1.2.1.211.1.1.0.3 |
This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh15MinES, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh15MinES objects. This object maps to the TR-159 notification nGroupPerfTca15MinES. |
|
.1.3.6.1.2.1.211.1.1.0.4 |
This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinSES, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh15MinSES objects. This object maps to the TR-159 notification nGroupPerfTca15MinSES. |
|
.1.3.6.1.2.1.211.1.1.0.5 |
This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinUAS, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh15MinUAS objects. This object maps to the TR-159 notification nGroupPerfTca15MinUAS. |
|
.1.3.6.1.2.1.211.1.1.0.6 |
This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh1DayES, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh1DayES objects. This object maps to the TR-159 notification nGroupPerfTca1DayES. |
|
.1.3.6.1.2.1.211.1.1.0.7 |
This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DaySES, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh1DaySES objects. This object maps to the TR-159 notification nGroupPerfTca1DaySES. |
|
.1.3.6.1.2.1.211.1.1.0.8 |
This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DayUAS, has been reached or exceeded for the GBS port. Generation of this notification is controlled by the gBondPortConfPmTcaEnable and gBondPortPmTcaProfileThresh1DayUAS objects. This object maps to the TR-159 notification nGroupPerfTca1DayUAS. |