GBNL3Igmp-MIB

        GBN Enterprise MIB definition.
    
Source file
GBNL3Igmp-MIB
Last revised
Identity
gbnL3IgmpMib
Base OID
1.3.6.1.4.1.13464.1.2.5.7
Imported Objects
ADMIN-MASTER-MIB gbnL3
Q-BRIDGE-MIB PortList
RFC1213-MIB mib-2
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString MacAddress RowStatus TruthValue
Net-SNMP examples using the gbn MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'GBNL3Igmp-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GBNL3Igmp-MIB::gbnL3IgmpMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GBNL3Igmp-MIB' -M '/opt/observium/mibs/gbn:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GBNL3Igmp-MIB::gbnL3IgmpMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (45)
.1.3.6.1.4.1.13464.1.2.5.7
.1.3.6.1.4.1.13464.1.2.5.7.1
.1.3.6.1.4.1.13464.1.2.5.7.1.1
.1.3.6.1.4.1.13464.1.2.5.7.1.2
.1.3.6.1.4.1.13464.1.2.5.7.1.3
.1.3.6.1.4.1.13464.1.2.5.7.1.4
.1.3.6.1.4.1.13464.1.2.5.7.2
.1.3.6.1.4.1.13464.1.2.5.7.2.1
.1.3.6.1.4.1.13464.1.2.5.7.2.1.1
.1.3.6.1.4.1.13464.1.2.5.7.2.1.2
.1.3.6.1.4.1.13464.1.2.5.7.2.1.3
.1.3.6.1.4.1.13464.1.2.5.7.2.1.4
.1.3.6.1.4.1.13464.1.2.5.7.2.1.5
.1.3.6.1.4.1.13464.1.2.5.7.2.1.6
.1.3.6.1.4.1.13464.1.2.5.7.2.1.7
.1.3.6.1.4.1.13464.1.2.5.7.3
.1.3.6.1.4.1.13464.1.2.5.7.3.1
.1.3.6.1.4.1.13464.1.2.5.7.3.1.1
.1.3.6.1.4.1.13464.1.2.5.7.3.1.2
.1.3.6.1.4.1.13464.1.2.5.7.3.1.3
.1.3.6.1.4.1.13464.1.2.5.7.4
.1.3.6.1.4.1.13464.1.2.5.7.4.1
.1.3.6.1.4.1.13464.1.2.5.7.4.1.1
.1.3.6.1.4.1.13464.1.2.5.7.4.1.2
.1.3.6.1.4.1.13464.1.2.5.7.4.1.3
.1.3.6.1.4.1.13464.1.2.5.7.4.1.4
.1.3.6.1.4.1.13464.1.2.5.7.4.1.5
.1.3.6.1.4.1.13464.1.2.5.7.5
.1.3.6.1.4.1.13464.1.2.5.7.5.1
.1.3.6.1.4.1.13464.1.2.5.7.5.1.1
.1.3.6.1.4.1.13464.1.2.5.7.5.1.2
.1.3.6.1.4.1.13464.1.2.5.7.5.1.3
.1.3.6.1.4.1.13464.1.2.5.7.6
.1.3.6.1.4.1.13464.1.2.5.7.6.1
.1.3.6.1.4.1.13464.1.2.5.7.6.1.1
.1.3.6.1.4.1.13464.1.2.5.7.6.1.2
.1.3.6.1.4.1.13464.1.2.5.7.6.1.3
.1.3.6.1.4.1.13464.1.2.5.7.6.1.4
.1.3.6.1.4.1.13464.1.2.5.7.7
.1.3.6.1.4.1.13464.1.2.5.7.7.1
.1.3.6.1.4.1.13464.1.2.5.7.7.1.1
.1.3.6.1.4.1.13464.1.2.5.7.7.1.2
Integer32
.1.3.6.1.4.1.13464.1.2.5.7.7.1.3
.1.3.6.1.4.1.13464.1.2.5.7.7.1.4
.1.3.6.1.4.1.13464.1.2.5.7.7.1.5
Dependencies (18) 6 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (3)
Enumeration
include(1)
exclude(2)
Enumeration
non_member(0)
delaying_member(1)
idle_member(2)
OctetString
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.