GBNL2Switch-MIB Table View

A table of dlf packets port control.

dlfForwardPortEntry row .1.3.6.1.4.1.13464.1.2.4.1.1.3.1

Table entry for dlf packets control.

Indexes

dlfForwardPort

Column	Syntax	OID
dlfForwardPort The port number in dlf packets table Item.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.1.3.1.1
dlfForwardStatus The dlf packets flag Item.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.13464.1.2.4.1.1.3.1.2

A table of mac address .

macAddressEntry row .1.3.6.1.4.1.13464.1.2.4.1.2.1.1

Table entry for mac address .

Indexes

macAddressMac macAddressVID macAddressPort macAddressStatic

Column	Syntax	OID
macAddressMac The MAC address in arl table Item.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.2.1.1.1
macAddressVID The vlan ID in arl table Item.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.2.1.1.2
macAddressPort The port number in arl table Item.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.2.1.1.3
macAddressStatus	Enumerationr/w Enumerated Values: 1 dynamic 2 static 3 permanent 4 backhole 5 delete	.1.3.6.1.4.1.13464.1.2.4.1.2.1.1.4
macAddressStatic The Static MAC address in arl table Item.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.2.1.1.5

A table of mac address learning port control.

macLearningPortEntry row .1.3.6.1.4.1.13464.1.2.4.1.2.2.1

Table entry for mac address learning control.

Indexes

macAddressLearningPort

Column	Syntax	OID
macAddressLearningPort The port number in mac address learning table Item.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.2.2.1.1
macAddressLearningStatus The mac address learning flag Item.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.13464.1.2.4.1.2.2.1.2
macAddressMaxCount the max mac address number of port.In some products, when macAddressLearningPort is 0, macAddressMaxCount is 0 means mac-control-learnig, others means auto-learning.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.13464.1.2.4.1.2.2.1.3

This table, which provides IGMP Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674).

igmpSnoopEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.4.1

Displays by VLAN, Multicast Group, and Multicast receive port
the set of ports enabled to forward Multicast Group traffic as
determined by the IGMP Snooping task.

Indexes

No indexes recorded

Column	Syntax	OID
igmpSnoopEgressPorts This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted that the IGMP Snooping task generates a pseu…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.13464.1.2.4.1.3.4.1.1

Used to config IGMP Snooping port options,such as group-limit and
fast-leave.

igmpSnoopPortEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.7.1

Entries of igmpSnoopPortTable.

Indexes

igmpSnoopPort

Column	Syntax	OID
igmpSnoopPort Index that uniquely identifies a Ap port within igmpSnoopPortTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.3.7.1.1
igmpSnoopPortFastLeave The fast-leave option of a IGMP Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.13464.1.2.4.1.3.7.1.2
igmpSnoopPortGroupLimit The max number of Multicast groups a port can learn.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.2.4.1.3.7.1.3
igmpSnoopPortMcastVlan Specify a multicast vlan for a port.IGMP report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.2.4.1.3.7.1.4

This table is used to config IGMP Snooping white-list and
black-list.

igmpSnoopGroupEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.8.1

Entries of igmpSnoopGroupTable.

Indexes

igmpSnoopGroupAddress igmpSnoopGroupPort igmpSnoopGroupVLAN

Column	Syntax	OID
igmpSnoopGroupAddress An index that uniquely identifies a multicast mac-address within igmpSnoopGroupTable.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.3.8.1.1
igmpSnoopGroupPort An index that uniquely identifies a Ap port within igmpSnoopGroupTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.3.8.1.2
igmpSnoopGroupVLAN An index that uniquely identifies a VLAN ID within igmpSnoopGroupTable.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.2.4.1.3.8.1.3
igmpSnoopGroupPolicy This entry is used to config IGMP Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by igmpSnoopDefaultGroupPolicy. If group is not found in white-lis…	Enumerationr/w Enumerated Values: 3 permit 4 deny 5 del	.1.3.6.1.4.1.13464.1.2.4.1.3.8.1.4

Used to config port info of cross-vlan multicast,such as tag/untag and vlanid of tag.

crossVlanMulticastEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.10.1

Entries of crossVlanMulticastPortTable.

Indexes

crossVlanPort

Column	Syntax	OID
crossVlanPort The port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.3.10.1.1
crossVlanPortTag Setting this object to true(1) of tag. Setting it to false(2) of untag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.13464.1.2.4.1.3.10.1.2
crossVlanPortVid The vlanid of tag port.	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.13464.1.2.4.1.3.10.1.3

This table is used to config IGMP Snooping white-list and black-list.

igmpSnoopProfileEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.12.1

Entries of igmpSnoopProfileTable.

Indexes

profileId

Column	Syntax	OID
profileId An index that uniquely identifies a profile within igmpSnoopProfileTable.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.13464.1.2.4.1.3.12.1.1
profileDescription This entry is used to config profile description.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.13464.1.2.4.1.3.12.1.2
profilePortList This entry is used to config ports to reference the profile.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.13464.1.2.4.1.3.12.1.4
profileRowStatus This entry is used to create or delete a profile within igmpSnoopProfileTable.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 active 4 createAndGo 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.4.1.3.12.1.5

This table is used to config ip ranges within profiles listed in igmpSnoopProfileTable.

igmpSnoopProfileIpRangeEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.13.1

Entries of igmpSnoopProfileIpRangeTable.

Indexes

profileId ipRangeStartIp ipRangeEndIp ipRangeVlanId

Column	Syntax	OID
ipRangeStartIp An index that uniquely identifies a start ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.2.4.1.3.13.1.1
ipRangeEndIp An index that uniquely identifies an end ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.13464.1.2.4.1.3.13.1.2
ipRangeVlanId An index that uniquely identifies a vlan.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.2.4.1.3.13.1.3
ipRangeRowStatus This entry is used to create or delete an ip range within igmpSnoopProfileIpRangeTable.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 active 4 createAndGo 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.4.1.3.13.1.4

This table is used to config mac ranges within profiles listed in igmpSnoopProfileTable.

igmpSnoopProfileMacRangeEntry row .1.3.6.1.4.1.13464.1.2.4.1.3.14.1

Entries of igmpSnoopProfileMacRangeTable.

Indexes

profileId macRangeStartMac macRangeEndMac macRangeVlanId

Column	Syntax	OID
macRangeStartMac An index that uniquely identifies a start mac address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.3.14.1.1
macRangeEndMac An index that uniquely identifies an end mac address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.3.14.1.2
macRangeVlanId An index that uniquely identifies a vlan.	Integer32 Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.2.4.1.3.14.1.3
macRangeRowStatus This entry is used to create or delete a mac range within igmpSnoopProfileMacRangeTable.	SNMPv2-TCRowStatusr/w Enumerated Values: 1 active 4 createAndGo 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.4.1.3.14.1.4

A Table of port mode.

portModeEntry row .1.3.6.1.4.1.13464.1.2.4.1.4.1.1

A list of portmode parameters.

Indexes

portNumber

Column	Syntax	OID
portNumber port number'.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.4.1.1.1
portMode type of mode	Enumerationr/w Enumerated Values: 1 trunk_port 2 access_port 3 hybrid_port	.1.3.6.1.4.1.13464.1.2.4.1.4.1.1.2

A table that contains information about every
Lacp channel group that is associated with this System.
This table is supported in products:TiNet S3750,TiNet S3526,
TiNet S3026E,TiNet S2016EI,TiNet S2024EI.

channelGroupEntry row .1.3.6.1.4.1.13464.1.2.4.1.5.3.1

A list of the Lacp channel group parameters. This is indexed
by the group index.

Indexes

channelGroupIndex

Column	Syntax	OID
channelGroupIndex The Index of the Lacp Channel group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.5.3.1.1
channelGroupPortList The complete set of ports currently associated with this Group. Each bit set in this list represents an Actor Port member of this Group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.13464.1.2.4.1.5.3.1.2
channelGroupRule The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group …	Enumerationr/w Enumerated Values: 1 srcMAC 2 destMAC 3 srcXORDestMAC 4 srcIP 5 destIP 6 srcXORDestIP	.1.3.6.1.4.1.13464.1.2.4.1.5.3.1.3
channelGroupRowstatus rowstatus of channel group.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.4.1.5.3.1.4

A table that contains information about every
Lacp channel group that is associated with this System.
This table is supported in products:TiNet S3750,TiNet S3526,
TiNet S3026E,TiNet S2016EI,TiNet S2024EI.

lacpPortModeEntry row .1.3.6.1.4.1.13464.1.2.4.1.6.1.1

The port mode of lacp. This is indexed
by the port number.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex The Index of the lacp port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.6.1.1.1
lacpPortMode The mode of the Lacp Channel group.Static:link aggregation is static configguration,and lacp protocol do not run. Active:the port in this mode can send lacp pdu active.Passive:the port in this mode just send pdu when n…	Enumerationr/w Enumerated Values: 1 static 2 active 3 passive	.1.3.6.1.4.1.13464.1.2.4.1.6.1.1.2
lacpPortRowstatus rowstatus of lacp port.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.13464.1.2.4.1.6.1.1.3
lacpPortGroupIndex channel group index of port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.6.1.1.4
lacpPortState lacp selected state of channel group member: down(1) means the port is link down member of channel group. nobndl(2) means the port is unselected member of channel group. bndl(3) means the port is selected as active memb…	Enumeration Enumerated Values: 1 down 2 nobndl 3 bndl 4 standby	.1.3.6.1.4.1.13464.1.2.4.1.6.1.1.5

This table, which provides MLD Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674).

mldSnoopEntry row .1.3.6.1.4.1.13464.1.2.4.1.7.4.1

Displays by VLAN, MLD Group, and MLD receive port
the set of ports enabled to forward MLD Group traffic as
determined by the MLD Snooping task.

Indexes

No indexes recorded

Column	Syntax	OID
mldSnoopEgressPorts This read-only object displays the set of ports enabled to forward specific MLD Group traffic as determined by the MLD Snooping task. It should be noted that the MLD Snooping task generates a pseudo- stat…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.13464.1.2.4.1.7.4.1.1

Used to config MLD Snooping port options,such as group-limit and
fast-leave.

mldSnoopPortEntry row .1.3.6.1.4.1.13464.1.2.4.1.7.7.1

Entries of mldSnoopPortTable.

Indexes

mldSnoopPort

Column	Syntax	OID
mldSnoopPort Index that uniquely identifies a Ap port within mldSnoopPortTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.7.7.1.1
mldSnoopPortFastLeave The fast-leave option of a MLD Snooping port,when set a group port is deleted immediately on receiving a leave packet, otherwise a max-response-time should be waited before deleting the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.13464.1.2.4.1.7.7.1.2
mldSnoopPortGroupLimit The max number of MLD groups a port can learn.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.13464.1.2.4.1.7.7.1.3
mldSnoopPortMcastVlan Specify a multicast vlan for a port.MLD report groups received on the port will be add to the multicast vlan, regardless of the vlan id indicated by the report packets, a zero vlan means no multicast vlan is used.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.13464.1.2.4.1.7.7.1.4

This table is used to config MLD Snooping white-list and
black-list.

mldSnoopGroupEntry row .1.3.6.1.4.1.13464.1.2.4.1.7.8.1

Entries of mldSnoopGroupTable.

Indexes

mldSnoopGroupAddress mldSnoopGroupPort mldSnoopGroupVLAN

Column	Syntax	OID
mldSnoopGroupAddress An index that uniquely identifies a multicast mac-address within mldSnoopGroupTable.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.13464.1.2.4.1.7.8.1.1
mldSnoopGroupPort An index that uniquely identifies a Ap port within mldSnoopGroupTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.13464.1.2.4.1.7.8.1.2
mldSnoopGroupVLAN An index that uniquely identifies a VLAN ID within mldSnoopGroupTable.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.13464.1.2.4.1.7.8.1.3
mldSnoopGroupPolicy This entry is used to config MLD Snooping white-list and black-list.Policies defined in white-list and black-list are superior to that has beed defined by mldSnoopDefaultGroupPolicy. If group is not found in white-list …	Enumerationr/w Enumerated Values: 3 permit 4 deny 5 del	.1.3.6.1.4.1.13464.1.2.4.1.7.8.1.4