G9981-MIB Table View

Table for configuration of G.Bond/ATM ports.  Entries in
this table MUST be maintained in a persistent manner.

g9981PortConfEntry row .1.3.6.1.2.1.208.1.1.1.1

An entry in the G.Bond/ATM Port Configuration table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note t…

Indexes

IF-MIBifIndex

Column	Syntax	OID
g9981PortConfUpDiffDelayTolerance A maximum tolerated upstream differential delay (among the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports. It is irrelevant for the GBS-R ports -- an att…	millisecondsUnsigned32r/w Constraints: range: 0-2047	.1.3.6.1.2.1.208.1.1.1.1.1
g9981PortConfDnDiffDelayTolerance A maximum tolerated downstream differential delay (among the member BCEs) of a G.Bond/ATM port, expressed in ms. This object is read-write for the GBS-C ports. It is irrelevant for the GBS-R ports -- an a…	millisecondsUnsigned32r/w Constraints: range: 0-2047	.1.3.6.1.2.1.208.1.1.1.1.2
g9981PortConfDiffDelayToleranceExceededEnable Indicates whether g9981UpDiffDelayToleranceExceeded and g9981DnDiffDelayToleranceExceeded notifications should be generated for G.Bond/ATM port. A value of true(1) indicates that the notifications are ena…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.208.1.1.1.1.3

This table provides overall status information of G.Bond/ATM
ports, complementing the generic status information from the
ifTable of the IF-MIB and the gBondFltStatus of the GBOND-MIB.
Additional status information about connected BCEs is available
from the relevant line MIBs.
          
This table contains live data from the equipment.  As such, it
is NOT persistent.

g9981PortStatEntry row .1.3.6.1.2.1.208.1.1.2.1

An entry in the G.Bond/ATM Port Status table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.
Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by the ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
g9981PortStatRxLostCells The number of lost ATM cells detected by the G.Bond/ATM port in the receive direction (e.g., upstream direction for a GBS-C port). Discontinuities in the value of this counter can occur at re-initializati…	cellsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.208.1.1.2.1.1
g9981PortStatTxLostCells The number of lost ATM cells detected by the peer G.Bond/ATM port in the receive direction, i.e., downstream direction for a GBS-C port. This object is irrelevant for the GBS-R ports -- an attempt to read…	cellsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.208.1.1.2.1.2
g9981PortStatMaxUpDiffDelay Current maximum upstream differential delay between all operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-only for the GBS-C ports. It is irrelevant for th…	0.1 msSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.208.1.1.2.1.3
g9981PortStatMaxDnDiffDelay Current maximum downstream differential delay between all operational BCEs in the G.Bond/ATM bonding group, measured in units of 0.1 ms. This object is read-only for the GBS-C ports. It is irrelevant for …	0.1 msSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.208.1.1.2.1.4

This table contains current Performance Monitoring information
for a G.Bond/ATM port.  This table contains live data from the
equipment and as such is NOT persistent.

g9981PortPmCurEntry row .1.3.6.1.2.1.208.1.1.3.1.1

An entry in the G.Bond/ATM Port PM table.
Each entry represents a G.Bond/ATM port indexed by the
ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
g9981PortPmCur15MinValidIntervals A read-only number of 15-minute intervals for which the performance data was collected. The value of this object will be 96 or the maximum number of 15-minute history intervals collected by the implementation, unless t…	HC-PerfHist-TC-MIBHCPerfValidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.208.1.1.3.1.1.1
g9981PortPmCur15MinInvalidIntervals A read-only number of 15-minute intervals for which the performance data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available. T…	HC-PerfHist-TC-MIBHCPerfInvalidIntervals Type Constraints: range: 0..96	.1.3.6.1.2.1.208.1.1.3.1.1.2
g9981PortPmCur15MinTimeElapsed A read-only count of seconds that have elapsed since the beginning of the current 15-minute performance interval. This object partially maps to the TR-159 attribute aGroupPerfCurr15MinTimeElapsed.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.208.1.1.3.1.1.3
g9981PortPmCur15MinRxLostCells A read-only count of lost ATM cells detected by a G.Bond/ATM port (e.g., the GBS-C) in the receive direction, during the current 15-minute performance history interval. Note that the total number of lost …	cellsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.4
g9981PortPmCur15MinTxLostCells A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 15-minute performance history interval. Note that the total number of lost AT…	cellsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.5
g9981PortPmCur15MinUpDiffDelay A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 15-minute performance interval. Note that th…	0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.6
g9981PortPmCur15MinDnDiffDelay A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C (as perceived by the GBS-R), measured in units of 0.1 ms, during the current 15-minute performance history…	0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.7
g9981PortPmCur1DayValidIntervals A read-only number of 1-day intervals for which data was collected. The value of this object will be 7 or the maximum number of 1-day history intervals collected by the implementation, unless the measurement was (re)st…	daysUnsigned32 Constraints: range: 0-7	.1.3.6.1.2.1.208.1.1.3.1.1.8
g9981PortPmCur1DayInvalidIntervals A read-only number of 1-day intervals for which data was not always available. The value will typically be zero, except in cases where the data for some intervals are not available.	daysUnsigned32 Constraints: range: 0-7	.1.3.6.1.2.1.208.1.1.3.1.1.9
g9981PortPmCur1DayTimeElapsed A read-only count of seconds that have elapsed since the beginning of the current 1-day performance interval.	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.208.1.1.3.1.1.10
g9981PortPmCur1DayRxLostCells A read-only count of lost ATM cells detected by the G.Bond/ATM port (e.g., the GBS-C) during the current 1-day performance interval. This object is inhibited during Severely Errored Seconds (SES) and Unav…	cellsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.11
g9981PortPmCur1DayTxLostCells A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the current 1-day performance history interval. This object is inhibited during Unavailab…	cellsHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.12
g9981PortPmCur1DayUpDiffDelay A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 1-day performance interval. This object is i…	0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.13
g9981PortPmCur1DayDnDiffDelay A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the current 1-day performance interval. This object is…	0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount	.1.3.6.1.2.1.208.1.1.3.1.1.14

This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner.

g9981PortPm15MinEntry row .1.3.6.1.2.1.208.1.1.3.2.1

An entry in the G.Bond/ATM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a

G.Bond/ATM port, indexed by the ifIndex, collected during a
particular 15-minute interv…

Indexes

IF-MIBifIndex g9981PortPm15MinIntervalIndex

Column	Syntax	OID
g9981PortPm15MinIntervalIndex Performance data interval number. 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf15MinInte…	Unsigned32 Constraints: range: 1-96	.1.3.6.1.2.1.208.1.1.3.2.1.1
g9981PortPm15MinIntervalMoniTime A read-only count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (900 seconds), except in a situation where performance data could not be collect…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.208.1.1.3.2.1.2
g9981PortPm15MinIntervalRxLostCells A read-only count of lost ATM cells detected by a G.Bond/ATM port (e.g., the GBS-C) in the receive direction, during the 15-minute performance history interval. Note that the total number of lost ATM cell…	cellsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.2.1.3
g9981PortPm15MinIntervalTxLostCells A read-only count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the 15-minute performance history interval. Note that the total number of lost ATM cells …	cellsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.2.1.4
g9981PortPm15MinIntervalUpDiffDelay A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS, measured in units of 0.1 ms, during the 15-minute performance history interval. Note that the …	0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.2.1.5
g9981PortPm15MinIntervalDnDiffDelay A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS, as perceived by its peer port, measured in units of 0.1 ms, during the 15-minute performance history interv…	0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.2.1.6
g9981PortPm15MinIntervalValid A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU MUST NOT produce…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.208.1.1.3.2.1.7

This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner.

g9981PortPm1DayEntry row .1.3.6.1.2.1.208.1.1.3.3.1

An entry in the G.Bond/ATM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9981Por…

Indexes

IF-MIBifIndex g9981PortPm1DayIntervalIndex

Column	Syntax	OID
g9981PortPm1DayIntervalIndex Performance data interval number. 1 is the most recent previous interval; interval 7 is 24 hours ago. Intervals 2..7 are OPTIONAL. This object partially maps to the TR-159 attribute aGroupPerf1DayInterva…	Unsigned32 Constraints: range: 1-7	.1.3.6.1.2.1.208.1.1.3.3.1.1
g9981PortPm1DayIntervalMoniTime A count of seconds over which the performance data was actually monitored. This value will be the same as the interval duration (86400 seconds), except in a situation where performance data could not be collected for a…	secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed Type Constraints: range: 0..86399	.1.3.6.1.2.1.208.1.1.3.3.1.2
g9981PortPm1DayIntervalRxLostCells A count of lost ATM cells detected by the G.Bond/ATM port (e.g., the GBS-C) during the 1-day performance history interval. This object is inhibited during Severely Errored Seconds (SES) and Unavailable Se…	cellsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.3.1.3
g9981PortPm1DayIntervalTxLostCells A count of lost ATM cells detected by the peer G.Bond/ATM port (e.g., by the GBS-R for the GBS-C) during the 1-day performance history interval. This object is inhibited during Unavailable Seconds (UAS).	cellsHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.3.1.4
g9981PortPm1DayIntervalUpDiffDelay A read-only value specifying the maximum upstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day performance history interval. This object is i…	0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.3.1.5
g9981PortPm1DayIntervalDnDiffDelay A read-only value specifying the maximum downstream differential delay between all operational BCEs in the GBS-C, measured in units of 0.1 ms, during the 1-day performance history interval. This object is…	0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount	.1.3.6.1.2.1.208.1.1.3.3.1.6
g9981PortPm1DayIntervalValid A read-only object indicating whether or not this history bucket contains valid data. A valid bucket is reported as true(1) and an invalid bucket as false(2). If this history bucket is invalid, the BTU MUST NOT produce…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.208.1.1.3.3.1.7