Standard view Table view

G9981-MIB

        The objects in this MIB module are used to manage the
multi-pair bonded xDSL interfaces using ATM inverse
multiplexing, as defined in ITU-T Recommendation G.998.1
(G.Bond/ATM).
        
This MIB module MUST be used in conjunction with the GBOND-MIB
module, common to all G.Bond technologies.
        
The following references are used throughout this MIB module:
        
[G.998.1] refers to:
  ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
  January 2005.
        
[TR-159] refers to:
  Broadband Forum Technical Report: 'Management Framework for
  xDSL Bonding', December 2008.
        
Naming Conventions:
  ATM   - Asynchronous Transfer Mode
  BCE   - Bonding Channel Entity
  BTU   - Bonding Terminating Unit
  CO    - Central Office
  CPE   - Customer Premises Equipment
  GBS   - Generic Bonding Sub-layer
  GBS-C - Generic Bonding Sub-layer, CO side
  GBS-R - Generic Bonding Sub-layer, RT (or CPE) side
  PM    - Performance Monitoring
  RT    - Remote Terminal
        
  SNR   - Signal to Noise Ratio
  SES   - Severely Errored Seconds
  UAS   - Unavailable Seconds
        
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Source file
G9981-MIB
Last revised
Identity
g9981MIB
Base OID
1.3.6.1.2.1.208
Imported Objects
HC-PerfHist-TC-MIB HCPerfCurrentCount HCPerfIntervalCount HCPerfInvalidIntervals HCPerfTimeElapsed HCPerfValidIntervals
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'G9981-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'G9981-MIB::g9981MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G9981-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G9981-MIB::g9981MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (53)
g9981MIB
.1.3.6.1.2.1.208
g9981Objects
.1.3.6.1.2.1.208.1
g9981Port
.1.3.6.1.2.1.208.1.1
g9981PortNotifications
.1.3.6.1.2.1.208.1.1.0
g9981PortConfTable
.1.3.6.1.2.1.208.1.1.1
g9981PortConfEntry
IF-MIBifIndex
 .1.3.6.1.2.1.208.1.1.1.1
g9981PortConfUpDiffDelayTolerance r/w
millisecondsUnsigned32
 .1.3.6.1.2.1.208.1.1.1.1.1
g9981PortConfDnDiffDelayTolerance r/w
millisecondsUnsigned32
 .1.3.6.1.2.1.208.1.1.1.1.2
g9981PortConfDiffDelayToleranceExceededEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.208.1.1.1.1.3
g9981PortStatTable
.1.3.6.1.2.1.208.1.1.2
g9981PortStatEntry
IF-MIBifIndex
 .1.3.6.1.2.1.208.1.1.2.1
g9981PortStatRxLostCells
cellsSNMPv2-SMICounter32
 .1.3.6.1.2.1.208.1.1.2.1.1
g9981PortStatTxLostCells
cellsSNMPv2-SMICounter32
 .1.3.6.1.2.1.208.1.1.2.1.2
g9981PortStatMaxUpDiffDelay
0.1 msSNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.208.1.1.2.1.3
g9981PortStatMaxDnDiffDelay
0.1 msSNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.208.1.1.2.1.4
g9981PM
.1.3.6.1.2.1.208.1.1.3
g9981PortPmCurTable
.1.3.6.1.2.1.208.1.1.3.1
g9981PortPmCurEntry
IF-MIBifIndex
 .1.3.6.1.2.1.208.1.1.3.1.1
g9981PortPmCur15MinValidIntervals
HC-PerfHist-TC-MIBHCPerfValidIntervals
 .1.3.6.1.2.1.208.1.1.3.1.1.1
g9981PortPmCur1DayTimeElapsed
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
 .1.3.6.1.2.1.208.1.1.3.1.1.10
g9981PortPmCur1DayRxLostCells
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.11
g9981PortPmCur1DayTxLostCells
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.12
g9981PortPmCur1DayUpDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.13
g9981PortPmCur1DayDnDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.14
g9981PortPmCur15MinInvalidIntervals
HC-PerfHist-TC-MIBHCPerfInvalidIntervals
 .1.3.6.1.2.1.208.1.1.3.1.1.2
g9981PortPmCur15MinTimeElapsed
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
 .1.3.6.1.2.1.208.1.1.3.1.1.3
g9981PortPmCur15MinRxLostCells
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.4
g9981PortPmCur15MinTxLostCells
cellsHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.5
g9981PortPmCur15MinUpDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.6
g9981PortPmCur15MinDnDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfCurrentCount
 .1.3.6.1.2.1.208.1.1.3.1.1.7
g9981PortPmCur1DayValidIntervals
daysUnsigned32
 .1.3.6.1.2.1.208.1.1.3.1.1.8
g9981PortPmCur1DayInvalidIntervals
daysUnsigned32
 .1.3.6.1.2.1.208.1.1.3.1.1.9
g9981PortPm15MinTable
.1.3.6.1.2.1.208.1.1.3.2
g9981PortPm15MinEntry
IF-MIBifIndexg9981PortPm15MinIntervalIndex
 .1.3.6.1.2.1.208.1.1.3.2.1
g9981PortPm15MinIntervalIndex
Unsigned32
 .1.3.6.1.2.1.208.1.1.3.2.1.1
g9981PortPm15MinIntervalMoniTime
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
 .1.3.6.1.2.1.208.1.1.3.2.1.2
g9981PortPm15MinIntervalRxLostCells
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.2.1.3
g9981PortPm15MinIntervalTxLostCells
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.2.1.4
g9981PortPm15MinIntervalUpDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.2.1.5
g9981PortPm15MinIntervalDnDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.2.1.6
g9981PortPm15MinIntervalValid
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.208.1.1.3.2.1.7
g9981PortPm1DayTable
.1.3.6.1.2.1.208.1.1.3.3
g9981PortPm1DayEntry
IF-MIBifIndexg9981PortPm1DayIntervalIndex
 .1.3.6.1.2.1.208.1.1.3.3.1
g9981PortPm1DayIntervalIndex
Unsigned32
 .1.3.6.1.2.1.208.1.1.3.3.1.1
g9981PortPm1DayIntervalMoniTime
secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
 .1.3.6.1.2.1.208.1.1.3.3.1.2
g9981PortPm1DayIntervalRxLostCells
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.3.1.3
g9981PortPm1DayIntervalTxLostCells
cellsHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.3.1.4
g9981PortPm1DayIntervalUpDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.3.1.5
g9981PortPm1DayIntervalDnDiffDelay
0.1 msHC-PerfHist-TC-MIBHCPerfIntervalCount
 .1.3.6.1.2.1.208.1.1.3.3.1.6
g9981PortPm1DayIntervalValid
SNMPv2-TCTruthValue
 .1.3.6.1.2.1.208.1.1.3.3.1.7
g9981Conformance
.1.3.6.1.2.1.208.2
g9981Groups
.1.3.6.1.2.1.208.2.1
g9981Compliances
.1.3.6.1.2.1.208.2.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. HC-PerfHist-TC-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. G9981-MIBrfcselected
Type Definitions (1)
MilliSeconds
Unsigned32
Conformance Groups (6)
g9981BasicGroup
g9981PortStatRxLostCells g9981PortStatTxLostCells g9981PortStatMaxUpDiffDelay g9981PortStatMaxDnDiffDelay
A collection of objects representing management information
for a G.Bond/ATM port.
 .1.3.6.1.2.1.208.2.1.1
g9981AlarmConfGroup
g9981PortConfUpDiffDelayTolerance g9981PortConfDnDiffDelayTolerance g9981PortConfDiffDelayToleranceExceededEnable
A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/ATM ports.
 .1.3.6.1.2.1.208.2.1.2
g9981NotificationGroup
g9981UpDiffDelayToleranceExceeded g9981DnDiffDelayToleranceExceeded
This group supports notifications of significant conditions
associated with G.Bond/ATM ports.
 .1.3.6.1.2.1.208.2.1.3
g9981PerfCurrGroup
g9981PortPmCur15MinValidIntervals g9981PortPmCur15MinInvalidIntervals g9981PortPmCur15MinTimeElapsed g9981PortPmCur15MinRxLostCells g9981PortPmCur15MinTxLostCells g9981PortPmCur15MinUpDiffDelay g9981PortPmCur15MinDnDiffDelay g9981PortPmCur1DayValidIntervals g9981PortPmCur1DayInvalidIntervals g9981PortPmCur1DayTimeElapsed g9981PortPmCur1DayRxLostCells g9981PortPmCur1DayTxLostCells g9981PortPmCur1DayUpDiffDelay g9981PortPmCur1DayDnDiffDelay
A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/ATM ports.
 .1.3.6.1.2.1.208.2.1.4
g9981Perf15MinGroup
g9981PortPm15MinIntervalMoniTime g9981PortPm15MinIntervalRxLostCells g9981PortPm15MinIntervalTxLostCells g9981PortPm15MinIntervalUpDiffDelay g9981PortPm15MinIntervalDnDiffDelay g9981PortPm15MinIntervalValid
A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during
previous 15-minute intervals.
 .1.3.6.1.2.1.208.2.1.5
g9981Perf1DayGroup
g9981PortPm1DayIntervalMoniTime g9981PortPm1DayIntervalRxLostCells g9981PortPm1DayIntervalTxLostCells g9981PortPm1DayIntervalUpDiffDelay g9981PortPm1DayIntervalDnDiffDelay g9981PortPm1DayIntervalValid
A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during
previous 1-day intervals.
 .1.3.6.1.2.1.208.2.1.6
Compliance Statements (1)

OID .1.3.6.1.2.1.208.2.2.1
The compliance statement for G.Bond/ATM interfaces.
Compliance with the following external compliance statements
is REQUIRED:

MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance
Required groups
mandatory g9981BasicGroup
mandatory g9981AlarmConfGroup
mandatory g9981NotificationGroup
optional g9981PerfCurrGroup Support for this group is only required for implementations
supporting Performance Monitoring.
optional g9981Perf15MinGroup Support for this group is only required for implementations
supporting historical Performance Monitoring.
optional g9981Perf1DayGroup Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring.
Notifications / Traps (2)
NameOIDDescription
g9981UpDiffDelayToleranceExceeded
g9981PortConfUpDiffDelayTolerance g9981PortStatMaxUpDiffDelay
.1.3.6.1.2.1.208.1.1.0.1
This notification indicates that the maximum upstream
differential delay has exceeded the max upstream differential
delay threshold, specified by
g9981PortConfUpDiffDelayTolerance.

This notification MAY be sent for the GBS-C ports while the
port is 'up', on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or is below it) and from low to
normal. This notification is not applicable to the GBS-R
ports.

Generation of this notification is controlled by the
g9981PortConfDiffDelayToleranceExceededEnable attribute.

This object maps to the TR-159 notification
nIMAUpDiffDelayToleranceExceeded.
g9981DnDiffDelayToleranceExceeded
g9981PortConfDnDiffDelayTolerance g9981PortStatMaxDnDiffDelay
.1.3.6.1.2.1.208.1.1.0.2
This notification indicates that the maximum downstream
differential delay has exceeded the max downstream
differential delay threshold, specified by
g9981PortConfDnDiffDelayTolerance.

This notification MAY be sent for the GBS-C ports while the
port is 'up', on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or is below it) and from low to
normal. This notification is not applicable to the GBS-R
ports.

Generation of this notification is controlled by the
g9981PortConfDiffDelayToleranceExceededEnable attribute.

This object maps to the TR-159 notification
nIMADownDiffDelayToleranceExceeded.