G6-WIFI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
38

accessPointTable

table
.1.3.6.1.4.1.3181.10.6.1.98.2 · 1 row entry · 7 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk accessPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::accessPointTable' 
Basic settings of the access point.
accessPointEntry row .1.3.6.1.4.1.3181.10.6.1.98.2.1
Indexes
Column Syntax OID
accessPointIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.1
accessPointHostname
Access point hostname.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.2
accessPointDeviceIp
Static device IP address of the access point.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.3
accessPointSubnetMask
Static subnet mask.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.4
accessPointGateway
Default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.5
accessPointUpdateFirmware
Update the access point firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version. Use Management.files.firmware.di…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.6
accessPointReboot
This command will restart the access point only. All wireless communication will be disrupted for about a minute! Syntax: reboot = CONFIRM.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.2.1.7

interfaceTable

table
.1.3.6.1.4.1.3181.10.6.1.98.3 · 1 row entry · 12 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk interfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::interfaceTable' 
This table defines the Ethernet interface available via Wifi
interfaceEntry row .1.3.6.1.4.1.3181.10.6.1.98.3.1
Indexes
Column Syntax OID
interfaceIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.1
interfaceCountryCode
International country code. Use DE for Germany, FR for france, etc.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.2
interfaceSsid
Defines the name under which the access point can be reached. This will be displayed as network name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.3
interfaceEnterPresharedKey
Enter the password required to access the network. No spaces are permitted and at least 8 character are required.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.4
interfaceEncryptedPresharedKey
Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.5
interfaceExposeSsid
Defines whether the network can be detected or is hidden.
Enumerationr/w
Enumerated Values:
0hidden
1visible
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.6
interfaceEncryption
 Enumerationr/w
Enumerated Values:
0none
1wep
2wpaPsk
3wpaPsk2
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.7
interfaceDhcpServer
Enable DHCP server to automatically provide an IP address to the attached wifi devices.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.8
interfaceDhcpStartAddress
Lowest address served.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.9
interfaceDhcpNumberOfAddresses
The number of IP addresses served starting from the dhcp_start_address
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.10
interfaceChannelNumber
Zero is automatic selection.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.11
interfaceChannelWidth
 Enumerationr/w
Enumerated Values:
1ht20
2ht40p
3ht40n
 .1.3.6.1.4.1.3181.10.6.1.98.3.1.12

firewallConfigTable

table
.1.3.6.1.4.1.3181.10.6.1.98.4 · 1 row entry · 7 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk firewallConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::firewallConfigTable' 
Each entry of this variable table defines the details of one test case.
firewallConfigEntry row .1.3.6.1.4.1.3181.10.6.1.98.4.1
Indexes
Column Syntax OID
firewallConfigIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.1
firewallConfigEnableIngressFirewall
When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.2
firewallConfigEnableEgressFirewall
When disabled the ingress_firewall table is not in effect. This is intended for test purposes only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.3
firewallConfigDropInvalidPackets
Drop invalid packets, not matching any active connection.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.4
firewallConfigSynRateLimiting
Defines how many SYN request are accepted per second. When the limit is reached, a SYN flooding attack is assumed and the port is protected. The value 0 disables the rate limit check.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.5
firewallConfigUseSynCookies
SYN cookie is a technique used to resist SYN flooding attacks.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.6
firewallConfigTcpWindowScaling
Enable TCP window scaling.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.1.98.4.1.7

firewallRulesTable

table
.1.3.6.1.4.1.3181.10.6.1.98.5 · 1 row entry · 5 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk firewallRulesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::firewallRulesTable' 
Firewall settings for traffic ingressing on the wifi interface.
firewallRulesEntry row .1.3.6.1.4.1.3181.10.6.1.98.5.1
Indexes
Column Syntax OID
firewallRulesIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.5.1.1
firewallRulesIncomingAclList
Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.5.1.2
firewallRulesIncomingAclDefault
Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.3181.10.6.1.98.5.1.3
firewallRulesOutgoingAclList
Name of the ACL (access control list) which declares which ACL applies to incoming traffic (redirects). Several ACL may be specified with a comma separated list. Example acl1, otherlist
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.1.98.5.1.4
firewallRulesOutgoingAclDefault
Defines which action is taken when none of the ACL records matches. Default is deny which blocks all traffic.
Enumerationr/w
Enumerated Values:
0deny
1permit
 .1.3.6.1.4.1.3181.10.6.1.98.5.1.5

statusTable

table
.1.3.6.1.4.1.3181.10.6.1.98.100 · 1 row entry · 3 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk statusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::statusTable' 
Indicates basic WIFI releated status inormation
statusEntry row .1.3.6.1.4.1.3181.10.6.1.98.100.1
Indexes
Column Syntax OID
statusIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.100.1.1
statusOverallStatus
Indicates if WIFI module is operational.
Enumeration
Enumerated Values:
0notPresent
1disabled
2fault
3operational
 .1.3.6.1.4.1.3181.10.6.1.98.100.1.2
statusNumberOfConnections
 SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.1.98.100.1.3

ipV4StatusTable

table
.1.3.6.1.4.1.3181.10.6.1.98.101 · 1 row entry · 4 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk ipV4StatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-WIFI-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-WIFI-MIB::ipV4StatusTable' 
This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.
ipV4StatusEntry row .1.3.6.1.4.1.3181.10.6.1.98.101.1
Indexes
Column Syntax OID
ipV4StatusIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.1.98.101.1.1
ipV4StatusDynamicDeviceIp
Currently used access point IP address.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.101.1.2
ipV4StatusDynamicSubnetMask
Currently used access point subnet mask.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.101.1.3
ipV4StatusDynamicGateway
Currently used access point gateway IP address.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.3181.10.6.1.98.101.1.4