G6-IP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

5

Rows

5

Columns

28

v4ConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.22.7 · 1 row entry · 9 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk v4ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IP-MIB::v4ConfigTable'

This section configures IP version 4 fixed IP settings or enables use of DHCP alternatively.

v4ConfigEntry row .1.3.6.1.4.1.3181.10.6.1.22.7.1

Indexes

Column Syntax OID

Automatically generated

Integer32

Constraints:
range: 0-0

.1.3.6.1.4.1.3181.10.6.1.22.7.1.1

v4ConfigDhcpMode

Enable DHCP to automatically retrieve an IP address and subnet mask. Also DHCP may be used to supply a CLI script file reference to be used on assignment.

Enumerationr/w

Enumerated Values:

0	disabled
1	useDhcp
2	dhcpWithScript

.1.3.6.1.4.1.3181.10.6.1.22.7.1.2

v4ConfigStaticDeviceIp

Static device IP address. When DHCP is enabled, DHCP has preference over this setting.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.3

v4ConfigStaticSubnetMask

Static subnet mask. When DHCP is enabled, DHCP has preference over this setting.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.4

v4ConfigStaticGateway

Static default gateway IP address. When DHCP is enabled, DHCP has preference over this setting.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.5

v4ConfigStaticDnsServer

Static domain name server IP address. When DHCP is enabled, DHCP has preference over this setting.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.6

v4ConfigSecondaryDeviceIp

Alternative IP address for management access. Not required in most installations.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.7

v4ConfigSecondarySubnetMask

This subnet mask applies to secondary ip address.

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.3181.10.6.1.22.7.1.8

v4ConfigDefaultAddressSelection

This parameter defines which own ip address is used for outgoing packets generated by the device. This only applies when a secondary_device_ip is configured.

Enumerationr/w

Enumerated Values:

0	primary
1	secondary

.1.3.6.1.4.1.3181.10.6.1.22.7.1.9

v6ConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.22.8 · 1 row entry · 4 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk v6ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IP-MIB::v6ConfigTable'

This section configures IP version 6 fixed IP settings or enables use of automatic configuration alternatively.

v6ConfigEntry row .1.3.6.1.4.1.3181.10.6.1.22.8.1

Indexes

Column Syntax OID

Automatically generated

Integer32

Constraints:
range: 0-0

.1.3.6.1.4.1.3181.10.6.1.22.8.1.1

v6ConfigEnableIpv6

General enable of IPv6 management access functionality.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.22.8.1.2

v6ConfigEnableIcmpAutoAddress

Decides if an ICMP assigned IPv6 address is accepted.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.22.8.1.3

v6ConfigEnableDhcpAutoAddress

Decides if an DHCP assigned IPv6 address is accepted.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.22.8.1.4

v6AddressTable

table

.1.3.6.1.4.1.3181.10.6.1.22.9 · 1 row entry · 2 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk v6AddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IP-MIB::v6AddressTable'

Defines as many static IPv6 address entries as desired.

v6AddressEntry row .1.3.6.1.4.1.3181.10.6.1.22.9.1

Indexes

Column	Syntax	OID
v6AddressIndex Automatically generated	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.3181.10.6.1.22.9.1.1`
v6AddressIp IPv6 address	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.22.9.1.2`

v4StatusTable

table

.1.3.6.1.4.1.3181.10.6.1.22.100 · 1 row entry · 9 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk v4StatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IP-MIB::v4StatusTable'

This section shows a summary of IPv4 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP.

v4StatusEntry row .1.3.6.1.4.1.3181.10.6.1.22.100.1

Indexes

Column	Syntax	OID
v4StatusIndex Automatically generated	Integer32 Constraints: `range: 0-0`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.1`
v4StatusDynamicDeviceIp Currently used device IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.2`
v4StatusDynamicSubnetMask Currently used subnet mask.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.3`
v4StatusDynamicGateway Currently used gateway IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.4`
v4StatusDynamicDnsServer1 Currently used domain name server IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.5`
v4StatusDynamicDnsServer2 Alternate currently used domain name server IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.6`
v4StatusDynamicDnsServer3 Alternate currently used domain name server IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.7`
v4StatusDynamicDnsServer4 Alternate currently used domain name server IP address.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.8`
v4StatusOutgoingDeviceIp Reflects the value v4_config.default_address_selection setting.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.3181.10.6.1.22.100.1.9`

v6StatusTable

table

.1.3.6.1.4.1.3181.10.6.1.22.101 · 1 row entry · 4 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk v6StatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IP-MIB::v6StatusTable'

This section shows a summary of IPv6 settings as they are currently active. These may reflect the statically configured values or may be dynamically assigned using DHCP or ICMP.

v6StatusEntry row .1.3.6.1.4.1.3181.10.6.1.22.101.1

Indexes

Column Syntax OID

Automatically generated

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.3181.10.6.1.22.101.1.1

IPv6 address.

OctetString

Constraints:
range: 0-50

.1.3.6.1.4.1.3181.10.6.1.22.101.1.2

Indicates the scope this IP is valid.

Enumeration

Enumerated Values:

0	link
1	site
2	global
3	other

.1.3.6.1.4.1.3181.10.6.1.22.101.1.3

Indicates the state of this IP.

Enumeration

Enumerated Values:

0	stateless
1	stateful
2	both
3	other

.1.3.6.1.4.1.3181.10.6.1.22.101.1.4