G6-IGMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
44

configTable

table
.1.3.6.1.4.1.3181.10.6.2.40.5 · 1 row entry · 16 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk configTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IGMP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IGMP-MIB::configTable' 
This table defines IGMP snooping parameter per VLAN. The table entries are referenced by VLAN ID and must match corresponding VLAN filter entires defined under vlan.filter_config.vlan_id. Any number of table entires can be created to configure unique settings for different VLANs. The default entry for VLAN ID=0 cannot be deleted and it used when no VLAN are used in the system.
configEntry row .1.3.6.1.4.1.3181.10.6.2.40.5.1
Indexes
Column Syntax OID
configIndex
Automatically generated
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.1
configVlanId
Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs are not used. Type '=:' to edit, use index '[*] = new_vlan:' t…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.2
configEnableIgmpSnooping
Enable IGMP (IPv4) snooping for this particular VLAN.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.3
configEnableMldSnooping
Enable MLD (IPv6) snooping for this particular VLAN.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.4
configSnoopingPorts
This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.5
configStaticRouterPorts
When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0x30 (ports 5-6)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.6
configMulticastRouterDetection
Defines the mode for detecting the router port.
Enumerationr/w
Enumerated Values:
0routerDiscovery
1queryMessage
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.7
configEnableReportAggregation
When enabled limits the number of reports received from same subnet to be transmitted only once to the router.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.8
configEnableFloodingUnregisterPkt
When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast streams are forwarded on static router ports only.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.9
configMcastGroupLimit
Indicates the number of multicast groups in the table.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.10
configGroupMembershipInterval
IGMP group_membership_interval time in seconds.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.11
configMaxResponseTime
IGMP response time in seconds.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.12
configEnableFastLeave
Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users still require this group. This parameter is used for IGMPv2 ho…
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.13
configLastMemberQueryTime
Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to remain on a network segment. If no hosts respond before the l…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.14
configNeighborDeadInterval
IGMP neighbor dead interval in seconds in case of router_discovery mode.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.15
configRouterAgingTime
IGMP router aging time in seconds.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.5.1.16

staticMulticastGroupsTable

table
.1.3.6.1.4.1.3181.10.6.2.40.6 · 1 row entry · 6 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk staticMulticastGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IGMP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IGMP-MIB::staticMulticastGroupsTable' 
This table may be used to enter the multicast addresses of other protocols beside IGMP, that need to be forwarded when IGMP snooping is enabled. This can be used instead of flood_unregistered_packets parameter and reduces the traffic in the network.
staticMulticastGroupsEntry row .1.3.6.1.4.1.3181.10.6.2.40.6.1
Indexes
Column Syntax OID
staticMulticastGroupsIndex
Automatically generated
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.1
staticMulticastGroupsName
Unique name to reference this entry and to remember whose MAC address is entered.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.2
staticMulticastGroupsDescription
Enter any information required to remember what this rule is intended to do.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.3
staticMulticastGroupsMulticastMac
MAC address entry.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.4
staticMulticastGroupsForwardingPortMask
Enter the ports to which this multicast should be forwarded. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.5
staticMulticastGroupsVlanId
VLAN on which the packets is entering.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3181.10.6.2.40.6.1.6

statusTable

table
.1.3.6.1.4.1.3181.10.6.2.40.100 · 1 row entry · 11 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk statusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IGMP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IGMP-MIB::statusTable' 
This table contains operational counters of the IGMP snooping module.
statusEntry row .1.3.6.1.4.1.3181.10.6.2.40.100.1
Indexes
Column Syntax OID
statusIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.1
statusIgmpRouterPorts
Displays the igmp router ports list
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.2
statusRxGeneralQueries
Displays the number of received general queries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.3
statusRxGroupQueries
Displays the number of received group queries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.4
statusRxReports
Displays the number of received report messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.5
statusRxLeaves
Displays the number of received leave messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.6
statusRxAdvertisements
Displays the number of received advertisements.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.7
statusRxTerminations
Displays the number of received terminations.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.8
statusRxUnsupported
Displays the number of received unsupported messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.9
statusRxErrors
Displays the number of received error packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.10
statusTxSolicitations
Displays the number of transmitted solicitation messges.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.100.1.11

mldStatusTable

table
.1.3.6.1.4.1.3181.10.6.2.40.101 · 1 row entry · 11 columns
Open in standard view
Uses the microsens variant from /opt/observium/mibs/microsens.
Command help
Walk mldStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-IGMP-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-IGMP-MIB::mldStatusTable' 
This table contains operational counters of the MLD snooping module.
mldStatusEntry row .1.3.6.1.4.1.3181.10.6.2.40.101.1
Indexes
Column Syntax OID
mldStatusIndex
Automatically generated
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.1
mldStatusMldRouterPorts
Displays the igmp router ports list
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.2
mldStatusRxGeneralQueries
Displays the number of received general queries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.3
mldStatusRxGroupQueries
Displays the number of received group queries.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.4
mldStatusRxReports
Displays the number of received report messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.5
mldStatusRxLeaves
Displays the number of received leave messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.6
mldStatusRxAdvertisements
Displays the number of received advertisements.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.7
mldStatusRxTerminations
Displays the number of received terminations.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.8
mldStatusRxUnsupported
Displays the number of received unsupported messages.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.9
mldStatusRxErrors
Displays the number of received error packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.10
mldStatusTxSolicitations
Displays the number of transmitted solicitation messges.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3181.10.6.2.40.101.1.11