FutureL2tp-MIB Table View

This table is used for configuring the status of l2tp on a port. i.e enabled/disabled.

l2tpPortEntry row .1.3.6.1.4.1.29601.2.108.1.2.1.1

This object specifies port-based administrator configurations of l2tp.

Indexes

l2tpPortIfIndex

Column	Syntax	OID
l2tpPortIfIndex This object specifies the Index of the interface on which the l2tp configuration are made.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.2.1.1.1
l2tpEnabledStatus This object specifies the status of l2tp on a particular port. The status can be either enable or disable.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.108.1.2.1.1.2
l2tpPortEncapType This object specifies the type of the packet to be traversed through the tunnel. Encapsulation type can be (port based / port,vlan / QinQ /QinAny) Port based - All the packet ingressed on this (port, atta…	Enumerationr/w Enumerated Values: 1 port 2 port-vlan 3 qinq 4 qinAny	.1.3.6.1.4.1.29601.2.108.1.2.1.1.3
l2tpPortRowStatus This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.108.1.2.1.1.4

This table is used for configuring static tunnels between two LCCEs.
This table has information about the configured pseudowire class name, 
loopback interface ip, IPSec status, encapsulation mode fields.

l2tpPseudowireEntry row .1.3.6.1.4.1.29601.2.108.1.3.1.1

This object specifies pseudowire class name, encapsulation mode, IPSec Status and Loopback interface
of every pseudowire that is configured by the user.

Indexes

l2tpPwIndex

Column	Syntax	OID
l2tpPwIndex This object uniquely identifies the specified tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.3.1.1.1
l2tpPwEncapMode This object specifies the mode in which the packets are encapsulated and de-capsulated i.e L2tp.	Enumeration Enumerated Values: 1 l2tpv3 2 mpls	.1.3.6.1.4.1.29601.2.108.1.3.1.1.2
l2tpIPSecEnabledStatus This object specifies the status of L2tpv3 over IPSec - enabled/disabled. When enabled the packet processing will include encryption/decryption.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.29601.2.108.1.3.1.1.3
l2tpIPSecMode This object specifies the IPSec mode. Tunnel - IP header is also encrypted. Transparent - IP header is not encrypted.	Enumeration Enumerated Values: 1 tunnel 2 transparent	.1.3.6.1.4.1.29601.2.108.1.3.1.1.4
l2tpPwLoopBack The object displays the loopback which the tunnel uses to encapsulate and de-capsulate the packet.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.29601.2.108.1.3.1.1.5
l2tpRemoteIpAddress The object specifies the remote IP address of the pseudowire	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.29601.2.108.1.3.1.1.6
l2tpPwSrcMacAddr The object indicates the source mac address that has to be matched with the packet	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.108.1.3.1.1.7
l2tpPwDestMacAddr The object indicates the destination mac address that has to be matched with the packet	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.29601.2.108.1.3.1.1.8
l2tpPwRowStatus This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.108.1.3.1.1.9

This table is used for configuring static sessions between the tunnels.
This table has information about the configured remote end Id, session ID, peer session ID, 
cookie type, local cookie and remote cookie details .

l2tpSessionEntry row .1.3.6.1.4.1.29601.2.108.1.4.1.1

This object indicates the remote end Id, local and remote cookie Id, cookie type, local and
remote cookie values of every session that is configured by the administrator.

Indexes

l2tpRemoteEndId

Column	Syntax	OID
l2tpRemoteEndId This object specifies the remote end identifier of a session which is unique across a particular connection (LCCE's sessions).	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.108.1.4.1.1.1
l2tpLocalSessionId This object specifies the local session identifier.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.108.1.4.1.1.2
l2tpRemoteSessionId This object specifies the remote session identifier.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.108.1.4.1.1.3
l2tpSessionPwIndex This object specifies the Pseudo wire index of a particular tunnel that is to be used for the virtual connection.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.4.1.1.4
l2tpSessionCookieSize The cookie type which can be either 4 byte or 8 byte, Default value is none when the cookiesize is configured as 4-byte, l2tpSessionLocalCookie and l2tpSessionRemoteCookie will accept only 4 byte cookie-ID when the coo…	Enumerationr/w Enumerated Values: 1 four-byte 2 eight-byte 3 none	.1.3.6.1.4.1.29601.2.108.1.4.1.1.5
l2tpSessionLocalCookie This object specifies the Local cookie this is configured by the administrator based on the size configured in l2tpSessionCookieSize.	OctetStringr/w	.1.3.6.1.4.1.29601.2.108.1.4.1.1.6
l2tpSessionRemoteCookie This object specifies the Remote cookie this is configured by the administrator based on the size configured in l2tpSessionCookieSize.	OctetStringr/w	.1.3.6.1.4.1.29601.2.108.1.4.1.1.7
l2tpSessionStatus This object specifies the status of the particular session i.e up/down based on the reachability of the destination IP network/address configured in the attachment-circuit	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.29601.2.108.1.4.1.1.8
l2tpSessionClearStatistics This object clear the statistics of this L2TP session . - True - clears the statistics. - False - Doesn't clear the statistics.By default it is set as ‘False’.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.29601.2.108.1.4.1.1.9
l2tpSessionRowStatus This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.108.1.4.1.1.10

This table is used for configuring static AC to connect the pseudo wire to the respective 
sessions.This table has information about the peer destination IP, Remote End Id of the session,
Pseudowireclass name and encap type (port based / port,vlan / QinQ /QinAny)

l2tpXconnectEntry row .1.3.6.1.4.1.29601.2.108.1.5.1.1

This object indicates the destination IP, Remote End Id of the session,Pseudowireclass name
and encap type (port based / port,vlan / QinQ /QinAny) of a particular xconnect.

Indexes

l2tpXconnectIfIndex l2tpXconnectId

Column	Syntax	OID
l2tpXconnectIfIndex This object specifies the Index of the interface on which the Ac is configured.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.5.1.1.1
l2tpXconnectId This object specifies the attachment circuit identifier.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.108.1.5.1.1.2
l2tpXconnectRemoteEndId This object specifies the remote end Id of the session to be used for the virtual connection.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.29601.2.108.1.5.1.1.3
l2tpXconnectInnerVlanId This object specifies the Inner Vlan Id in which the AC is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.5.1.1.4
l2tpXconnectOuterVlanId This object specifies the Outer Vlan Id in which the AC is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.5.1.1.5
l2tpXconnectRowStatus This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.29601.2.108.1.5.1.1.6

This table specifies information about the statistics of the configured sessions.
This table has the information about the total Tx & Rx packets, total packets encapsulated,
total packets decapsulated, total invalid packets received.

l2tpSessionStatsEntry row .1.3.6.1.4.1.29601.2.108.1.6.1.1

This table specifies the information about the total Tx & Rx packets, total packets encapsulated,
total packets decapsulated, total invalid packets received in a particular
session/pesudowire class/xconnect

Indexes

l2tpSessionRemoteEndId

Column	Syntax	OID
l2tpSessionRemoteEndId This object specifies the Remote End Identifier which is unique across the connection (LCCE's sessions)	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.6.1.1.1
l2tpSessionStatsTotalEncap This object specifies the total number of packets encapsulated in a particular session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.6.1.1.2
l2tpSessionStatsTotalDecap This object specifies the total number of packets decapsulated in a particular session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.6.1.1.3
l2tpSessionStatsCookieMismatch This object specifies the total number of packets with cookie mismatch that are received on a particular session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.6.1.1.4
l2tpSessionStatsInvalidPeerIp This object specifies the total number of packets with Invalid Ip Address that are received on a particular encap session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.6.1.1.5

This table specifies information about the statistics of a particular port.
This table contains port based packet drops information.

l2tpPortStatsEntry row .1.3.6.1.4.1.29601.2.108.1.7.1.1

This table specifies the information on the statistics of packet drops in a particular port

Indexes

l2tpPortStatsIfIndex

Column	Syntax	OID
l2tpPortStatsIfIndex This object specifies the Index of the interface on which the l2tp configuration are made.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.29601.2.108.1.7.1.1.1
l2tpPortStatsInvalidFrames This object specifies the total packets with invalid frames like packets that does not belong to any session etc that are received on a particular port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.7.1.1.2
l2tpPortTotalTx This object specifies the total number of packets transmitted via particular inteface .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.7.1.1.3
l2tpPortTotalRx This object specifies the total number of packets Received via particular inteface .	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.29601.2.108.1.7.1.1.4