FspR7-SPEQ-MIB

        The Auto SPAN Equalization MIB.
    
Source file
FspR7-SPEQ-MIB
Last revised
Identity
speqMIB
Base OID
1.3.6.1.4.1.2544.1.11.4
Imported Objects
ADVA-MIB EntityClass EntityIndex fspR7 neEventLogIdentityTranslation neEventLogTimeStamp ServiceImpairment TrapAlarmSeverity
FspR7-MIB FspR7AdminState FspR7AdminStateCaps FspR7EntitySecondaryStates FspR7Integer32Caps FspR7OperState
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) snmpModules TimeTicks Unsigned32
SNMPv2-TC DateAndTime DisplayString RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the adva MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'FspR7-SPEQ-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FspR7-SPEQ-MIB::speqMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FspR7-SPEQ-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FspR7-SPEQ-MIB::speqMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (60)
.1.3.6.1.4.1.2544.1.11.4
.1.3.6.1.4.1.2544.1.11.4.10
.1.3.6.1.4.1.2544.1.11.4.10.1
.1.3.6.1.4.1.2544.1.11.4.10.1.1
.1.3.6.1.4.1.2544.1.11.4.10.1.1.1
.1.3.6.1.4.1.2544.1.11.4.10.1.1.2
Integer32
.1.3.6.1.4.1.2544.1.11.4.10.1.1.3
.1.3.6.1.4.1.2544.1.11.4.10.1.1.4
.1.3.6.1.4.1.2544.1.11.4.10.2
.1.3.6.1.4.1.2544.1.11.4.10.2.1
.1.3.6.1.4.1.2544.1.11.4.10.2.1.1
.1.3.6.1.4.1.2544.1.11.4.12
.1.3.6.1.4.1.2544.1.11.4.12.1
.1.3.6.1.4.1.2544.1.11.4.12.10
.1.3.6.1.4.1.2544.1.11.4.12.10.1
.1.3.6.1.4.1.2544.1.11.4.12.10.1.1
0.1 dBmInteger32
.1.3.6.1.4.1.2544.1.11.4.12.10.1.2
0.1 dBmInteger32
.1.3.6.1.4.1.2544.1.11.4.12.10.1.3
0.1 dBmInteger32
.1.3.6.1.4.1.2544.1.11.4.12.10.1.4
.1.3.6.1.4.1.2544.1.11.4.12.10.1.5
.1.3.6.1.4.1.2544.1.11.4.12.11
.1.3.6.1.4.1.2544.1.11.4.12.11.1
.1.3.6.1.4.1.2544.1.11.4.12.11.1.1
.1.3.6.1.4.1.2544.1.11.4.12.11.1.2
.1.3.6.1.4.1.2544.1.11.4.12.11.1.3
.1.3.6.1.4.1.2544.1.11.4.12.11.1.4
.1.3.6.1.4.1.2544.1.11.4.12.2
.1.3.6.1.4.1.2544.1.11.4.13
.1.3.6.1.4.1.2544.1.11.4.13.10
.1.3.6.1.4.1.2544.1.11.4.13.10.1
.1.3.6.1.4.1.2544.1.11.4.13.10.1.1
.1.3.6.1.4.1.2544.1.11.4.13.10.1.10
.1.3.6.1.4.1.2544.1.11.4.13.10.1.11
.1.3.6.1.4.1.2544.1.11.4.13.10.1.12
.1.3.6.1.4.1.2544.1.11.4.13.10.1.13
.1.3.6.1.4.1.2544.1.11.4.13.10.1.14
.1.3.6.1.4.1.2544.1.11.4.13.10.1.15
.1.3.6.1.4.1.2544.1.11.4.13.10.1.16
.1.3.6.1.4.1.2544.1.11.4.13.10.1.2
.1.3.6.1.4.1.2544.1.11.4.13.10.1.3
.1.3.6.1.4.1.2544.1.11.4.13.10.1.4
.1.3.6.1.4.1.2544.1.11.4.13.10.1.5
.1.3.6.1.4.1.2544.1.11.4.13.10.1.6
.1.3.6.1.4.1.2544.1.11.4.13.10.1.7
.1.3.6.1.4.1.2544.1.11.4.13.10.1.8
.1.3.6.1.4.1.2544.1.11.4.13.10.1.9
.1.3.6.1.4.1.2544.1.11.4.14
.1.3.6.1.4.1.2544.1.11.4.14.1
.1.3.6.1.4.1.2544.1.11.4.14.1.0
.1.3.6.1.4.1.2544.1.11.4.14.2
.1.3.6.1.4.1.2544.1.11.4.14.2.1
.1.3.6.1.4.1.2544.1.11.4.14.2.1.1
.1.3.6.1.4.1.2544.1.11.4.14.2.1.1.1
.1.3.6.1.4.1.2544.1.11.4.14.2.1.1.2
.1.3.6.1.4.1.2544.1.11.4.14.2.2
.1.3.6.1.4.1.2544.1.11.4.14.2.2.1
.1.3.6.1.4.1.2544.1.11.4.14.2.2.1.1
.1.3.6.1.4.1.2544.1.11.4.14.2.2.1.2
.1.3.6.1.4.1.2544.1.11.4.14.2.2.1.3
.1.3.6.1.4.1.2544.1.11.4.14.2.2.1.4
Dependencies (12) 6 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (10)
Enumeration
undefined(0)
none(1)
disable(2)
enableGainAdopt(3)
enableNoGainAdopt(4)
Enumeration
undefined(0)
enable(1)
disable(2)
Enumeration
undefined(0)
unknown(1)
enable(2)
disable(3)
Enumeration
undefined(0)
rls(1)
opr(2)
Bits
capUndefined(0)
capRls(1)
capOpr(2)
Enumeration
undefined(0)
addDrop(1)
passThrough(2)
hybrid(3)
Enumeration
undefined(0)
four(1)
one(2)
seven(3)
Enumeration
undefined(0)
preAmp(1)
boosterAmp(2)
lineAmp(3)
Enumeration
undefined(0)
oosDisabledSpeq(120000)
oosMaintenanceSpeq(120002)
messageLossSpeq(120004)
oscFiberMissingSpeq(120005)
optLowSpeq(120006)
ppcOutOfRangeSpeq(120007)
gainTooHighSpeq(120008)
gainTooLowSpeq(120009)
gainAdoptFailedSpeq(120010)
Enumeration
undefined(0)
none(1)
inProgress(2)
lockedOut(3)
Notifications / Traps (21)
NameOIDDescription
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120000
Non-Specific Disablement of Management Access
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120002
Alarms are logged but not notified, service affecting changes and operations are permitted
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120004
SPEQ Message Loss
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120005
SPEQ not functioning, OSC Fiber(s) missing
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120006
Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120007
Adopted PPC exceeded the PPC range
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120008
Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120009
Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.120010
Alarm is raised when SPEQ Gain Adoption process fails.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.124001
This trap is sent every time an entity is created. No containers
or other sub-entities in the chassis are reported created by this trap,
the NMS must read these data.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.124002
This trap is sent every time an entity is deleted. The
sub-entities (containers, modules, etc.) are not reported deleted.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.124003
This trap is sent when an entity state is changed.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.124004
This trap is sent when some object is changed.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126000
Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126001
Span Equalization Gain Not Adjusted.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126002
Span Equalization Gain Adjustment Failed.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126003
Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126004
Span Equalization request denied; operation could not be performed by the SPEQ-Server
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126005
PPC is auto calculated based on the adopted Gain for Brown-Field installations.
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126006
Provisioned per-channel power level exceeded the allowable limit
.1.3.6.1.4.1.2544.1.11.4.14.1.0.126007
Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA.