FS-WLAN-FIT-AP-IN-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
11
Rows
11
Columns
111
fsInfoConfigTable
table.1.3.6.1.4.1.52642.1.1.10.2.83.2.1
·
1 row entry
·
1 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsInfoConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsInfoConfigTable'
ap configuration Info table.
ap configuration Info table.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
config AP WIDS work mode, 0: WIDS disabled 1:only support monitor
2:support AP monotor and access . |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.2.1.1.1 |
fsConfigStaInfoTable
table.1.3.6.1.4.1.52642.1.1.10.2.83.4.1
·
1 row entry
·
1 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsConfigStaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsConfigStaInfoTable'
AC Config Station.
AC Config AP Bandwith max.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
AC Config AP Bandwith max.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.4.1.1.1 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1
·
1 row entry
·
9 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsAirIfInfoStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsAirIfInfoStatisticsTable'
get air interface parameters statistics.
get AP Associa Fail times
| Column | Syntax | OID |
|---|---|---|
|
ap total Rx Data Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.1 |
|
ap total Tx Data Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.2 |
|
ap total Tx Lost Data Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.3 |
|
ap total Tx Associate Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.4 |
|
ap total Rx Associate Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.5 |
|
ap Beacon Total Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.6 |
|
ap total Rx Data Bytes.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.7 |
|
ap total Tx Data Bytes.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.8 |
|
ap Resource Utilization.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.1.1.9 |
fsAirIfTxResendDataTable
table.1.3.6.1.4.1.52642.1.1.10.2.83.6.2
·
1 row entry
·
1 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsAirIfTxResendDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsAirIfTxResendDataTable'
get air interface Resend Data frames.
get air interface Resend Data frames
Indexes
| Column | Syntax | OID |
|---|---|---|
|
station total Resend Data Frams.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.6.2.1.1 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1
·
1 row entry
·
36 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsTermServiceStaticWithSSIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsTermServiceStaticWithSSIDTable'
get Term Service Statistics With SSID.
get Term Service Statistics With SSID
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Total user number that have connected to the AP.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.1 |
|
Total current user number that have connected to the AP.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.2 |
|
station request to access to AP times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.3 |
|
ap response station access request times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.4 |
|
sta success to connet to ap times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.5 |
|
Total link verify failure times due to algorithm or transform SN discrepancy.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.6 |
|
Total link verify failure times due to timeout.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.7 |
|
Total link verify failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.8 |
|
Total link verify failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.9 |
|
Total Association failure times due to algorithm or transform SN discrepancy.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.10 |
|
Total Association failure times due to timeout.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.11 |
|
Total Association failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.12 |
|
Total Association failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.13 |
|
Total re-association attempt times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.14 |
|
Total re-association success times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.15 |
|
Total Reassociation failure times due to algorithm or transform SN discrepancy.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.16 |
|
Total Reassociation failure times due to timeout.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.17 |
|
Total Reassociation failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.18 |
|
Total Reassociation failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.19 |
|
Total Identification attempt times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.20 |
|
Total Identification success times.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.21 |
|
Total identification failure times due to password error.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.22 |
|
Total Identification failure times due to algorithm or transform SN discrepancy.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.23 |
|
Total Identification failure times due to timeout.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.24 |
|
Total Identification failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.25 |
|
Total Identification failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.26 |
|
Total failure times of removing link verification.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.27 |
|
Total failure times due to leaving AP coverage area.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.28 |
|
Total remove link failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.29 |
|
Total remove link failure times due to link verify failure.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.30 |
|
Total remove link failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.31 |
|
Total failure times of removing association.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.32 |
|
Total remove association failure times due to leaving AP coverage area.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.33 |
|
Total remove association failure times due to inefficiency.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.34 |
|
Total remove association failure times due to link verify failure.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.35 |
|
Total remove association failure times due to other reason.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.1.1.1.36 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.2.1
·
1 row entry
·
2 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsTermServiceStaticWithAPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsTermServiceStaticWithAPTable'
get Term Service Statistics With AP.
get Term Service Statistics With AP
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Total accumulation time of all users that have connected to the AP.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.2.1.1.1 |
|
Total Associate Fail times for the AP.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.2.1.1.2 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1
·
1 row entry
·
10 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsTermServiceStationWithStationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsTermServiceStationWithStationTable'
Statistic of user MAC address by SSID.
The entry of apTermServiceStationWithStationTable.
| Column | Syntax | OID |
|---|---|---|
|
station Associate to ap time ,unit is minute.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.2 |
|
ap Rx station Data Frames .
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.3 |
|
ap Rx station Error Frames .
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.4 |
|
ap Tx station Data Frames .
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.5 |
|
ap Resend station Data Frames .
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.6 |
|
ap Send to station average DATA speed .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.7 |
|
ap Send from station average DATA speed .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.8 |
|
station Throughput .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.9 |
|
ap receive station signal strength .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.10 |
|
ap receive station signal noise .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.7.3.1.1.11 |
fsDot11WIDSInfoTable
table.1.3.6.1.4.1.52642.1.1.10.2.83.8.1
·
1 row entry
·
30 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsDot11WIDSInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsDot11WIDSInfoTable'
The table used to acac the configuration information of ac/ac.
The entry of the table used to acac the configuration information of ac/ac.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The dot11 wids local index num .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.1 |
||||
|
The ssid permitted to access the service.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.2 |
||||
|
The bssid permitted to access the service.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.3 |
||||
|
The OUI whose device is permitted to provide the service.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.4 |
||||
|
The BSS MAC of the Suspicious AP.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.5 |
||||
|
The count of the Suspicious AP.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.6 |
||||
|
The moment when the AP is detected as the Suspicious AP at the first time.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.7 |
||||
|
The moment when the AP is detected as the Suspicious AP at the last time.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.8 |
||||
|
The SSID of the Suspicious AP.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.9 |
||||
|
The max signal strength of the Suspicious AP.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.10 |
||||
|
The channel the Suspicious AP is in.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.11 |
||||
|
The frame encrption of the Suspicious AP.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.12 |
||||
|
The tag telling whether it needs to deal the Suspicious AP.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.13 |
||||
|
The tag telling whether to ignore the Suspicious AP.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.14 |
||||
|
The MAC of the the Suspicious STA.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.15 |
||||
|
The AP count which is detecting the Suspicious STA.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.16 |
||||
|
The moment when the STA is detected as the Suspicious STA at the first time.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.17 |
||||
|
The moment when the AP is detected as the Suspicious AP at the last time.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.18 |
||||
|
The BSSID which the the Suspicious STA is trying to access.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.19 |
||||
|
The max signal strength of the Suspicious STA.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.20 |
||||
|
The channel the Suspicious sta is in.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.21 |
||||
|
The tag whether the Suspicious STA is working in the Ad hoc mode.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.22 |
||||
|
The tag telling whether it needs to deal the Suspicious STA.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.23 |
||||
|
The tag telling whether to ignore the Suspicious STA.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.24 |
||||
|
This tag tells whether to enable flooding attack detecting.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.25 |
||||
|
This tag tells whether to enable spoof attack detecting.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.26 |
||||
|
This tag tells whether to enable weak IV detecting.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.27 |
||||
|
This tag tells whether to clear the illegal equipment history.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.28 |
||||
|
This tag tells whether to clear the attack detection history.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.29 |
||||
|
This tag tells whether to clear the attack detection statics.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.1.1.30 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2
·
1 row entry
·
7 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsDot11LawlessApInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsDot11LawlessApInfoTable'
The table used to display Lawless AP info t
The table used to display Lawless AP info
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This is Lawless AP local Index number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.1 |
|
This is Lawless AP signal Strength .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.2 |
|
This is Lawless AP signal SNR .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.3 |
|
This is Lawless AP Channel Number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.4 |
|
This is Lawless AP SSID Name display .
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.5 |
|
This is Lawless AP BSSID <MAC_ADDRESS> .
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.6 |
|
This is Lawless AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP . |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.2.1.7 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3
·
1 row entry
·
7 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsDot11UndefinedApInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsDot11UndefinedApInfoTable'
The table used to display Undefined AP info t
The table used to display Undefined AP info
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This is Undefined AP local Index number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.1 |
|
This is Undefined AP signal Strength .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.2 |
|
This is Undefined AP signal SNR .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.3 |
|
This is Undefined AP Channel Number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.4 |
|
This is Undefined AP SSID Name display .
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.5 |
|
This is Undefined AP BSSID <MAC_ADDRESS> .
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.6 |
|
This is Undefined AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP . |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.3.1.7 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4
·
1 row entry
·
7 columns
Uses the fscom variant from
Command help
/opt/observium/mibs/fscom.
Walk fsDot11LegalityApInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-WLAN-FIT-AP-IN-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-WLAN-FIT-AP-IN-MIB::fsDot11LegalityApInfoTable'
The table used to display Legality AP info t
The table used to display Legality AP info
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This is Legality AP local Index number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.1 |
|
This is Legality AP signal Strength .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.2 |
|
This is Legality AP signal SNR .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.3 |
|
This is Legality AP Channel Number .
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.4 |
|
This is Legality AP SSID Name display .
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.5 |
|
This is Legality AP BSSID <MAC_ADDRESS> .
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.6 |
|
This is Legality AP Treat mode detail 1: DosAttack state
2: disturb User connect to lawless AP . |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.83.8.4.1.7 |