FS-QINQ-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

fsQinQPortConfigTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1 · 1 row entry · 5 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsQinQPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsQinQPortConfigTable'

A table for configuring 802.1q tunnel port mode, native 
vlan and allowed vlan

fsQinQPortConfigEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1

Indexes

fsQinQPortConfigIndex

Column Syntax OID

fsQinQPortConfigIndex

port index.

FS-TCIfIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1.1

fsQinQPortConfigMode

Port mode, indicates that port is an
other(1), dot1q-tunnel(2).

Enumerationr/w

Enumerated Values:

1	other
2	dot1q-tunnel

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1.2

fsQinQPortNativeVlan

The value indicate the VID of the native vlan of that this port .
This field is effective for only dot1q_tunnel port.

Q-BRIDGE-MIBVlanIdr/w

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1.3

fsQinQPortAllowedUntagVlanList

The set of vlans that should transmit egress packets
for this VLAN as untagged.
Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifyi…

VlanListr/w

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1.4

fsQinQPortAllowedTagVlanList

The set of vlans that should transmit egress packets
for this VLAN as tagged.
Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifying…

VlanListr/w

.1.3.6.1.4.1.52642.1.1.10.2.53.1.1.1.5

fsQinQIfServiceTPIDConfigTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.3 · 1 row entry · 2 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsQinQIfServiceTPIDConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsQinQIfServiceTPIDConfigTable'

An entry for configuring Service TPID functions for
interfaces.

fsQinQIfServiceTPIDConfigEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.3.1

An entry for configuring Service TPID function for
interfaces.

Indexes

fsQinQIfServiceTPIDConfigIfIndex

Column	Syntax	OID
fsQinQIfServiceTPIDConfigIfIndex port index.	FS-TCIfIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.52642.1.1.10.2.53.1.3.1.1`
fsQinQIfServiceTPIDValue Service TPID value configured for an interface. The default Service TPID value is 0x8100.	Integer32r/w Constraints: `range: 1-65535`	`.1.3.6.1.4.1.52642.1.1.10.2.53.1.3.1.2`

fsQinQPriorityCopyTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.4 · 1 row entry · 2 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsQinQPriorityCopyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsQinQPriorityCopyTable'

A table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature copy the
priority of an inner VLAN tag to the priority of an 
outer VLAN tag.

fsQinQPriorityCopyEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.4.1

An entry for configuring priority copy function for
interfaces.

Indexes

fsQinQPriorityCopyIfIndex

Column Syntax OID

fsQinQPriorityCopyIfIndex

port index.

FS-TCIfIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.4.1.1

fsQinQPriorityCopyPortStatus

The value enabled(1) indicates that priority copy should
be enabled on this interface. When disabled(2), priority
copy is disabled on this interface.

P-BRIDGE-MIBEnabledStatusr/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.52642.1.1.10.2.53.1.4.1.2

fsQinQPriorityRemarkTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.5 · 1 row entry · 3 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsQinQPriorityRemarkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsQinQPriorityRemarkTable'

A table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature uses the
priority of an inner VLAN tag to remark the priority
of an outer VLAN tag.

fsQinQPriorityRemarkEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.5.1

An entry for configuring priority remark function for
interfaces.

Indexes

fsQinQPriorityRemarkIfIndex fsQinQPriorityValue

Column	Syntax	OID
fsQinQPriorityRemarkIfIndex port index.	FS-TCIfIndex Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.52642.1.1.10.2.53.1.5.1.1`
fsQinQPriorityValue The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.52642.1.1.10.2.53.1.5.1.2`
fsQinQPriorityRemarkValue The new priority value used to fill outer tag.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.52642.1.1.10.2.53.1.5.1.3`

fsselectiveQinQBasedOnVlanTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6 · 1 row entry · 5 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsselectiveQinQBasedOnVlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsselectiveQinQBasedOnVlanTable'

A table for configuring vlan field in 802.1Q-in-Q outer 
VLAN tag for interfaces. This feature adds an outer VLAN 
tag based on inbound VLAN IDs, modifies outer VLAN tag 
based on inner VLAN IDs, modifies outer VLAN tag based on
outer VLAN IDs, modifies outer VLAN tag based on outer VLAN
ID and inner VLAN IDs.

fsselectiveQinQBasedOnVlanEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1

An entry for configuring vlan field in 802.1Q-in-Q
outer VLAN tag based on VLAN for interfaces.

Indexes

fsselectiveQinQBasedOnVlanIfIndex fsselectiveQinQBasedOnVlanType fsselectiveQinQBasedOnVlanOuterVlanID fsselectiveQinQBasedOnVlanOldOuterVlanID

Column Syntax OID

fsselectiveQinQBasedOnVlanIfIndex

port index.

FS-TCIfIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1.1

fsselectiveQinQBasedOnVlanType

802.1Q-in-Q strategy type.

Enumeration

Enumerated Values:

1	addOuterTag
2	modifyOuterTagBaseInnerTag
3	modifyOuterTagBaseOuterTag
4	modifyOuterTagBaseInnerAndOuterTag

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1.2

fsselectiveQinQBasedOnVlanOuterVlanID

The outer VLAN ID.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1.3

fsselectiveQinQBasedOnVlanOldOuterVlanID

The old outer VLAN ID of original 802.1Q packets.
This field is only effective for mofifying outer
VLAN tag based on old outer VLAN ID and inner VLAN
IDs.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1.4

fsselectiveQinQBasedOnVlanVlanList

The inbound VLAN IDs which need 802.1Q-in-Q processing.
Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifying vlans 9 through 16, et…

VlanList

.1.3.6.1.4.1.52642.1.1.10.2.53.1.6.1.5

fsselectiveQinQBasedOnAclTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.7 · 1 row entry · 4 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsselectiveQinQBasedOnAclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsselectiveQinQBasedOnAclTable'

A table for configuring vlan field in 802.1Q-in-Q VLAN tag
for interfaces. This feature adds an outer VLAN tag based on 
ACL, modifies the outer VLAN tag based on ACL or modifies the
inner VLAN tag based on ACL.

fsselectiveQinQBasedOnAclEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.7.1

An entry for configuring vlan field in 802.1Q-in-Q
VLAN tag for interfaces.

Indexes

fsselectiveQinQBasedOnAclIfIndex fsselectiveQinQBasedOnAclType fsselectiveQinQBasedOnAclAclID

Column Syntax OID

fsselectiveQinQBasedOnAclIfIndex

port index.

FS-TCIfIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.7.1.1

fsselectiveQinQBasedOnAclType

802.1Q-in-Q strategy type.

Enumeration

Enumerated Values:

1	addOuterTag
2	modifyOuterTag
3	modifyInnerTag

.1.3.6.1.4.1.52642.1.1.10.2.53.1.7.1.2

fsselectiveQinQBasedOnAclAclID

The ACL index.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.7.1.3

fsselectiveQinQBasedOnAclVlanID

The VLAN ID.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.7.1.4

fsQinQVlanMappingTable

table

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8 · 1 row entry · 5 columns

Open in standard view

Uses the fscom variant from /opt/observium/mibs/fscom.

Command help

Walk fsQinQVlanMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-QINQ-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-QINQ-MIB::fsQinQVlanMappingTable'

A table for configuring 802.1Q-in-Q vlan mapping for interfaces.

fsQinQVlanMappingEntry row .1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1

An entry for configuring vlan mapping for interfaces.

Indexes

fsQinQVlanMappingIfIndex fsQinQVlanMappingType fsQinQVlanMappingNewVlanID

Column Syntax OID

fsQinQVlanMappingIfIndex

port index.

FS-TCIfIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1.1

fsQinQVlanMappingType

vlan mapping strategy type.

Enumeration

Enumerated Values:

1	vlanMappingIn
2	vlanMappingOut

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1.2

fsQinQVlanMappingNewVlanID

The new VLAN ID of original ingress or egress 802.1Q packets.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1.3

fsQinQVlanMappingOldVlanList

The old VLAN IDs of original ingress 802.1Q packets.
Each octet within this value specifies a set of eight
vlans, with the first octet specifying vlans 1 through
8, the second octet specifying vlans 9 through 16, etc.
W…

VlanList

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1.4

fsQinQVlanMappingOldVlanID

The old VLAN ID of original egress 802.1Q packets.
This field is effective for egress vlan mapping strategy.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.52642.1.1.10.2.53.1.8.1.5