FS-NMS-VLAN-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
22

dot1qPortVlanTable

table
.1.3.6.1.4.1.52642.9.182.3 · 1 row entry · 9 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk dot1qPortVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-VLAN-EXT-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-VLAN-EXT-MIB::dot1qPortVlanTable' 
A table of dot1qVlan operation.
dot1qPortVlanTableEntry row .1.3.6.1.4.1.52642.9.182.3.1
A collection of dot1qVlan operation.
Indexes
Column Syntax OID
dot1qPvid
The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.
Q-BRIDGE-MIBVlanIndexr/w .1.3.6.1.4.1.52642.9.182.3.1.1
dot1qPortAllowedVlans
value for port allowed vlan list.
OctetStringr/w .1.3.6.1.4.1.52642.9.182.3.1.4
dot1qPortUntaggedVlans
value for port untagged vlan list.
OctetStringr/w .1.3.6.1.4.1.52642.9.182.3.1.5
dot1qPortAcceptableFrameTypes
When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port
will be acc…
Enumerationr/w
Enumerated Values:
1admitAll
2admitOnlyVlanTagged
 .1.3.6.1.4.1.52642.9.182.3.1.6
dot1qPortIngressFiltering
When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames.

This control does not aff…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.52642.9.182.3.1.7
dot1qPortGvrpStatus
The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still
ena…
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.9.182.3.1.8
dot1qPortGvrpFailedRegistrations
The total number of failed GVRP registrations, for any
reason, on this port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.52642.9.182.3.1.9
dot1qPortGvrpLastPduOrigin
The Source MAC Address of the last GVRP message
received on this port.
RFC1213-MIBPhysAddress .1.3.6.1.4.1.52642.9.182.3.1.10
dot1qUplinkPortTpid
Default value is 0x8100. Note: only when the value of 'dot1qPortSwitchingMode' is 'Dot1qTunnelUplink', this value is available.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.3.1.11

dot1qPortVlanTranslateTable

table
.1.3.6.1.4.1.52642.9.182.4 · 1 row entry · 4 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk dot1qPortVlanTranslateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-VLAN-EXT-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-VLAN-EXT-MIB::dot1qPortVlanTranslateTable' 
A table of dot1q Port Vlan Translate Table operation.
dot1qPortVlanTranslateTableEntry row .1.3.6.1.4.1.52642.9.182.4.1
A collection of dot1qVlan Translate operation. Attention:
When VLAN is created, dttTeMode,dttTeOldVlanId??dttTeNewVlanId
should be provided, and dttTePri is optional. When item is
deleted, only dttTeMode and dttTeOldV…
Indexes
Column Syntax OID
dttTeOldVlanId
value for port old vlan id to be translated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.4.1.2
dttTeNewVlanId
value for port new vlan id to be translated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.4.1.3
dttTePri
value for port new vlan id priority to be translated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.4.1.4
dttTeRowStatus
value for port vlan translation row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.9.182.4.1.5

dot1qVlanTable

table
.1.3.6.1.4.1.52642.9.182.6 · 1 row entry · 2 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk dot1qVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-VLAN-EXT-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-VLAN-EXT-MIB::dot1qVlanTable' 
A table of dot1qVlan operation.
dot1qVlanTableEntry row .1.3.6.1.4.1.52642.9.182.6.1
A collection of dot1qVlan operation.
Indexes
dot1qVlanIndex
Column Syntax OID
dot1qVlanTagged
value for port allowed vlan list.
OctetStringr/w .1.3.6.1.4.1.52642.9.182.6.1.1
dot1qVlanStaticRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.9.182.6.1.2

portDttConfigTable

table
.1.3.6.1.4.1.52642.9.182.9 · 1 row entry · 7 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portDttConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-VLAN-EXT-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-VLAN-EXT-MIB::portDttConfigTable' 
dot1q-translating-tunnel configuraton Table
portDttConfigEntry row .1.3.6.1.4.1.52642.9.182.9.1
Indexes
Column Syntax OID
dttStartVlanId
The starting VLAN ID, working together with endVlanId,
consists of a VLAN group. The VLAN ID match the VLAN group
will be QinQed or flated with specified outer VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.9.1.1
dttEndVlanId
The ending VLAN ID, working together with startVlanId,
consists of a VLAN range. The VLAN ID match the VLAN range
will be QinQed or flated with specified outer VLAN
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.9.1.2
dttSVlanId
The outer VLAN id to be QinQed or flated
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.182.9.1.3
dttTeMode
value for port vlan translation item mode. The default value is DttTeModeQinQ(2).
Enumerationr/w
Enumerated Values:
1dttTeModeFlat
2dttTeModeQinQ
 .1.3.6.1.4.1.52642.9.182.9.1.4
dttSTagCosNewValue
The new STAG COS value to be set
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.52642.9.182.9.1.5
dttRowStatus
 SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.9.182.9.1.6
dttTeModeType
value for port vlan translation item mode type.
Enumerationr/w
Enumerated Values:
1dttTeModeType1to1
2dttTeModeTypento1
 .1.3.6.1.4.1.52642.9.182.9.1.7