FS-NMS-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

vifTable

table

.1.3.6.1.4.1.52642.9.63.1.1 · 1 row entry · 9 columns

Open in standard view

Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.

Command help

Walk vifTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-IF-MIB::vifTable'

A list of voice interface entries.  The number of
entries is given by the value of ifNumber.

vifEntry row .1.3.6.1.4.1.52642.9.63.1.1.1

An interface entry containing objects at the
subnetwork layer and below for a particular
interface.

Indexes

vifIndex

Column Syntax OID

vifIndex

A unique value for each voice interface. Its value
ranges between 1 and the value of vifNumber. The
value for each voice interface must remain constant at
least from one re-initialization of the entity's
network manag…

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.1.1.1

vifDescr

A textual string containing information about the
voice interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.

RFC1213-MIBDisplayString

Constraints:
range: 0-255

.1.3.6.1.4.1.52642.9.63.1.1.1.2

vifType

The type of Voice interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.

Enumeration

Enumerated Values:

1	other
100	voiceEM
101	voiceFXO
102	voiceFXS

.1.3.6.1.4.1.52642.9.63.1.1.1.3

vifMtu

The size of the largest datagram which can be
sent/received on the voice interface, specified in
octets. in fact,for voice interface,this value should be 0

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.1.1.4

vifSpeed

contains a zero value.

RFC1155-SMIGauge

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52642.9.63.1.1.1.5

vifPhysAddress

contains an octet string of zero length.

SNMPv2-TCPhysAddress

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.52642.9.63.1.1.1.6

vifAdminStatus

The desired administrative status of the
Analog Telephony interface port.

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.52642.9.63.1.1.1.7

vifOperStatus

The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.

Enumeration

Enumerated Values:

1	up
2	down
3	testing
4	unknown
5	dormant

.1.3.6.1.4.1.52642.9.63.1.1.1.8

vifLastChange

The value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52642.9.63.1.1.1.9

ifStormControlTable

table

.1.3.6.1.4.1.52642.9.63.1.2 · 1 row entry · 4 columns

Open in standard view

Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.

Command help

Walk ifStormControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-IF-MIB::ifStormControlTable'

A list of interface entries.  The number of
entries is given by the value of ifNumber.

ifStormControlEntry row .1.3.6.1.4.1.52642.9.63.1.2.1

An interface entry containing objects at the
subnetwork layer and below for a particular
interface.

Indexes

ifIndex

Column	Syntax	OID
ifIndex A unique value for each voice interface. Its value ranges between 1 and the value of vifNumber. The value for each voice interface must remain constant at least from one re-initialization of the entity's network manag…	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52642.9.63.1.2.1.1`
ifStormControlBroadcast Interface Storm Control Broadcast, range is 10-1000000kbps	Integer32r/w Constraints: `range: 10-1000000`	`.1.3.6.1.4.1.52642.9.63.1.2.1.2`
ifStormControlMulticast Interface Storm Control Multicast, range is 10-1000000kbps	Integer32r/w Constraints: `range: 10-1000000`	`.1.3.6.1.4.1.52642.9.63.1.2.1.3`
ifStormControlUnicast Interface Storm Control Unicast, range is 10-1000000kbps	Integer32r/w Constraints: `range: 10-1000000`	`.1.3.6.1.4.1.52642.9.63.1.2.1.4`

ifSfpParameterTable

table

.1.3.6.1.4.1.52642.9.63.1.7 · 1 row entry · 23 columns

Open in standard view

Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.

Command help

Walk ifSfpParameterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-IF-MIB::ifSfpParameterTable'

A list of sfp property table entries.

ifSfpParameterEntry row .1.3.6.1.4.1.52642.9.63.1.7.1

A collection of additional objects in the
sfp property table.

Indexes

ifSfpIndex

Column Syntax OID

ifSfpIndex

The only diid of port in System.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.1

txPower1

The tx power 1 of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.2

rxPower1

The rx power 1 of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.3

temperature

Sfp module temperature. The unit is 1/256 degree.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.4

vlotage

Sfp module volt. The unit is 0.1mV.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.5

curr1

Sfp module bias current 1. The unit is 2uA.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.6

vendname

Sfp module vend name.

OctetString

.1.3.6.1.4.1.52642.9.63.1.7.1.7

txPower2

The tx 2 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.8

rxPower2

The rx 2 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.9

curr2

Sfp module bias current 2. The unit is 2uA.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.10

txPower3

The tx 3 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.11

rxPower3

The rx 3 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.12

curr3

Sfp module bias current 3. The unit is 2uA.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.13

txPower4

The tx 4 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.14

rxPower4

The rx 4 power of optical module. The unit is 0.01DBm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.15

curr4

Sfp module bias current 4. The unit is 2uA.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.16

type

Sfp module interface type.

Enumeration

Enumerated Values:

1	sfp
2	copper-sfp
3	other

.1.3.6.1.4.1.52642.9.63.1.7.1.17

transDist

Sfp module interface transmission distance. Unit is meter.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.18

waveLen

Sfp module interface wave length. Unit is nm.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.7.1.19

sfpPresentStatus

SFP status.

Enumeration

Enumerated Values:

1	online
2	offline

.1.3.6.1.4.1.52642.9.63.1.7.1.20

sfpLostStatus

SFP status.

Enumeration

Enumerated Values:

1	normal
2	lost

.1.3.6.1.4.1.52642.9.63.1.7.1.21

sfpMismatchStatus

SFP status.

Enumeration

Enumerated Values:

1	match
2	mismatch

.1.3.6.1.4.1.52642.9.63.1.7.1.22

sfpSeqNum

SFP sequence number.

OctetString

.1.3.6.1.4.1.52642.9.63.1.7.1.23

cableDiagnoseTable

table

.1.3.6.1.4.1.52642.9.63.1.8 · 1 row entry · 4 columns

Open in standard view

Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.

Command help

Walk cableDiagnoseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-IF-MIB::cableDiagnoseTable'

A interface list of cable diagnose table entries.

cableDiagnoseEntry row .1.3.6.1.4.1.52642.9.63.1.8.1

A collection of cable diagnose objects in the
interface table.

Indexes

cableDiagIfIndex

Column Syntax OID

cableDiagIfIndex

The only diid of port in System.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52642.9.63.1.8.1.1

enable

enable=1,disable=2.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.52642.9.63.1.8.1.2

period

period=0 means manual scanning, the range of auto scanning period is 1-32767.

Integer32r/w

Constraints:
range: 0-32767

.1.3.6.1.4.1.52642.9.63.1.8.1.3

description

cable diagnoisis descpription.

OctetString

.1.3.6.1.4.1.52642.9.63.1.8.1.4