FS-NMS-HAL-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
36

physicalIfConfigTable

table
.1.3.6.1.4.1.52642.9.63.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk physicalIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::physicalIfConfigTable' 
A list of physical interface configuration entries.
physicalIfConfigEntry row .1.3.6.1.4.1.52642.9.63.1.3.1
An interface configuration entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifConfigIndex
Index of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.3.1.1
keepalive
Loopback detect of interface. The range is 0-32767. 0 means disable. Default is 0(disable).
Integer32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.52642.9.63.1.3.1.2
speed
Interface speed. Only valid for non-PON interface. 1-auto, 2-10M, 3-100M, 4-1000M, 5-10000M. Default is auto.
Enumerationr/w
Enumerated Values:
1auto
2speed-10M
3speed-100M
4speed-1000M
5speed-10000M
 .1.3.6.1.4.1.52642.9.63.1.3.1.3
duplex
Interface duplex. Only valid for non-PON interface. 1-auto, 2-full, 3-half. Default is auto.
Enumerationr/w
Enumerated Values:
1auto
2full
3half
 .1.3.6.1.4.1.52642.9.63.1.3.1.4
medium
Interface medium. Only valid for non-PON interface. 1-auto, 2-copper, 3-fiber. Default is auto.
Enumerationr/w
Enumerated Values:
1auto
2copper
3fiber
 .1.3.6.1.4.1.52642.9.63.1.3.1.5
fiberAutoConfig
Fiber port auto config mode, include speed and duplex. 1-enable, 2-disable. Default is disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52642.9.63.1.3.1.6
flowControl
Interface flow control config. 1-on, 2-off. Default is off.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.52642.9.63.1.3.1.7
errorFrameCheck
Error frame check config. 1-enable, 2-disable. Default is disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52642.9.63.1.3.1.8
phyIfType
Port initial type. 1-copper, 2-fiber, 3-combo, 4-other.
Enumeration
Enumerated Values:
1copper
2fiber
3combo
4other
 .1.3.6.1.4.1.52642.9.63.1.3.1.9
interPacketGap
InterPacketGap config. The range is 8-27 (unit:byte). default is 12.
Integer32r/w
Constraints:
range: 8-27
 .1.3.6.1.4.1.52642.9.63.1.3.1.10
singlefiber
singlefiber tx or rx config. The range is 0-2 0-disable ,1-rx, 2-tx.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.52642.9.63.1.3.1.11
disablerx
disable port recieve config. The range is 0-1 0-enable, 1-disable.
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.52642.9.63.1.3.1.12
disabletx
disable port send config. The range is 0-1 0-enable, 1-disable.
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.52642.9.63.1.3.1.13

physicalIfBlockTable

table
.1.3.6.1.4.1.52642.9.63.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk physicalIfBlockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::physicalIfBlockTable' 
A list of physical interface Block entries.
physicalIfBlockEntry row .1.3.6.1.4.1.52642.9.63.1.4.1
An interface Block entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifBlockIndex
Index of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.4.1.1
broadcastBlock
Broadcast block config. 1-enable, 2-disable. Default is disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52642.9.63.1.4.1.2
multicastBlock
Multicast block config. 1-enable, 2-disable. Default is disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52642.9.63.1.4.1.3
unicastBlock
Unknown unicast block config. 1-enable, 2-disable. Default is disable.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.52642.9.63.1.4.1.4

portSecurityTable

table
.1.3.6.1.4.1.52642.9.63.1.5.1 · 1 row entry · 4 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::portSecurityTable' 
A list of interface security entries.
portSecurityEntry row .1.3.6.1.4.1.52642.9.63.1.5.1.1
An interface security entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifSecurityIndex
Index of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.5.1.1.1
portSecMode
Port security mode. 1-dynamic, 2-static accept, 3-static reject, 4-none.
LLID interface only support dynamic mode. PON and PSG interface don't
support any mode. Default is none mode(4).
Enumerationr/w
Enumerated Values:
1dynamic
2static-accept
3static-reject
4none
 .1.3.6.1.4.1.52642.9.63.1.5.1.1.2
maxMacAddressNum
Max mac address number that interface is allowed learning. Min num is 1.
Max num is different for different device. Default is 1.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.5.1.1.3
maxMacAddressNumCapability
Capability of mac address learning limitation.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.5.1.1.4

portSecurityStaticMacAddressTable

table
.1.3.6.1.4.1.52642.9.63.1.5.2 · 1 row entry · 3 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portSecurityStaticMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::portSecurityStaticMacAddressTable' 
A list of interface security static MAC address entries.
portSecurityStaticMacAddressEntry row .1.3.6.1.4.1.52642.9.63.1.5.2.1
An interface security static mac address entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifSecurityStaticMacAddrIndex
Indexs of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.5.2.1.1
ifMacAddress
Indexs of interface. Static mac address of port security.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.52642.9.63.1.5.2.1.2
operation
The operation of static mac address. 1-add, 2-delete.
Enumerationr/w
Enumerated Values:
1add
2delete
 .1.3.6.1.4.1.52642.9.63.1.5.2.1.3

portSecurityBindBlockTable

table
.1.3.6.1.4.1.52642.9.63.1.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portSecurityBindBlockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::portSecurityBindBlockTable' 
A list of interface security binding block entries.
portSecurityBindBlockEntry row .1.3.6.1.4.1.52642.9.63.1.5.3.1
An interface security binding block entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifSecurityBindBlockIndex
Indexs of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.5.3.1.1
ifBindBlockMacAddress
Indexs of interface. MAC address. If not care mac address, the value should be set to FFFFFF.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.52642.9.63.1.5.3.1.2
ifBindBlockIPAddress
Indexs of interface. Ip address. If not care ip address, the value should be set to 255.255.255.255 .
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.9.63.1.5.3.1.3
ifBindBlockIPV6Address
Indexs of interface. Ipv6 address. If not care ipv6 address, all bit value should be set to 1.
OctetString .1.3.6.1.4.1.52642.9.63.1.5.3.1.4
mode
The config mode.0:del,1:bind mac,2:bind ip,3:bind arp,4:bind arp ip,5:bind ip mac,6:bind arp mac,
7:bind arp ip mac,8:bind ipv6,9:bind ipv6 mac,10:block mac,11:block ip ,12:block arp,13:block arp ip,
14:block ip mac,15:…
Enumerationr/w
Enumerated Values:
1bind-mac
2bind-ip
3bind-arp
4bind-arp-ip
5bind-ip-mac
6bind-arp-mac
7bind-arp-ip-mac
8bind-ipv6
9bind-ipv6-mac
10block-mac
11block-ip
12block-arp
13block-arp-ip
14block-ip-mac
15block-arp-mac
16block-arp-ip-mac
17block-ipv6
18block-ipv6-mac
 .1.3.6.1.4.1.52642.9.63.1.5.3.1.5
ifBindBlockVlan
One of the indexes of portSecurityBindBlockEntry.If not care VLAN, the value should be set to 0.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.52642.9.63.1.5.3.1.6

vlanSecurityTable

table
.1.3.6.1.4.1.52642.9.63.1.5.4 · 1 row entry · 2 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk vlanSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::vlanSecurityTable' 
A list of VLAN security entries.
vlanSecurityEntry row .1.3.6.1.4.1.52642.9.63.1.5.4.1
An interface VLAN security entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
securityVlanID
VlanID to config. The range is 1-4094
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.52642.9.63.1.5.4.1.1
dynamicMacAddress
The max number of mac address to be learned. The range is 1-32768. 0 means disable. Default is disable.
Integer32r/w
Constraints:
range: 0-32768
 .1.3.6.1.4.1.52642.9.63.1.5.4.1.2

portProtectGroupTable

table
.1.3.6.1.4.1.52642.9.63.1.6.1 · 1 row entry · 2 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portProtectGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::portProtectGroupTable' 
A list of port Protect Group entries.
portProtectGroupEntry row .1.3.6.1.4.1.52642.9.63.1.6.1.1
An interface port Protect Group entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
groupID
The groupID of port protect. The range is 1-32.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.52642.9.63.1.6.1.1.1
ifProtectGroupOperation
The operation of group. 1-add, 2-delete.
Enumerationr/w
Enumerated Values:
1add
2delete
 .1.3.6.1.4.1.52642.9.63.1.6.1.1.2

portProtectAppTable

table
.1.3.6.1.4.1.52642.9.63.1.6.2 · 1 row entry · 2 columns
Open in standard view
Uses the fscom-nms variant from /opt/observium/mibs/fscom-nms.
Command help
Walk portProtectAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-NMS-HAL-IF-MIB' -M '/opt/observium/mibs/fscom-nms:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-NMS-HAL-IF-MIB::portProtectAppTable' 
A list of port Protect Application entries.
portProtectAppEntry row .1.3.6.1.4.1.52642.9.63.1.6.2.1
An interface port Protect Application entry containing objects at the
subnetwork layer and below for a particular interface.
Indexes
Column Syntax OID
ifProtectAppIndex
Indexs of interface. The same value as ifIndex in ifTable of RFC1213.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.9.63.1.6.2.1.1
ifGroupIDApp
The groupID of port protect. The range is 1-32. The same value as groupID in portProtectGroupEntry.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.52642.9.63.1.6.2.1.2