FS-IGMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

fsIgmpInterfaceTable

table
.1.3.6.1.4.1.52642.1.1.10.2.26.1.1 · 1 row entry · 19 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsIgmpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-IGMP-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-IGMP-MIB::fsIgmpInterfaceTable' 
The (conceptual) table listing the interfaces on
which IGMP is enabled.
fsIgmpInterfaceEntry row .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1
An entry (conceptual row) representing an
interface on which IGMP is enabled.
Indexes
Column Syntax OID
fsIgmpInterfaceIfIndex
The ifIndex value of the interface for which IGMP is
enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.1
fsIgmpInterfaceQueryInterval
The frequency at which IGMP Host-Query packets are
transmitted on this interface.
secondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.2
fsIgmpInterfaceVersion
The version of IGMP which is running on this interface.
This object can be used to configure a router capable of
running either value. For IGMP to function correctly, all
routers on a LAN must be configured to run the …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.3
fsIgmpInterfaceQuerier
The address of the IGMP Querier on the IP subnet to which
this interface is attached.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.4
fsIgmpInterfaceQueryMaxResponseTime
The maximum query response time advertised in IGMPv2
queries on this interface.
tenths of secondsUnsigned32r/w
Constraints:
range: 10-250
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.5
fsIgmpInterfaceQuerierUpTime
The time since starIgmpInterfaceQuerier was last changed.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.6
fsIgmpInterfaceQuerierExpiryTime
The amount of time remaining before the Other Querier
Present Timer expires. If the local system is the querier,
the value of this object is zero.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.7
fsIgmpInterfaceVersion1QuerierTimer
The time remaining until the host assumes that there are no
IGMPv1 routers present on the interface. While this is non-
zero, the host will reply to all queries with version 1
membership reports.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.8
fsIgmpInterfaceWrongVersionQueries
The number of queries received whose IGMP version does not
match igmpInterfaceVersion, over the lifetime of the row
entry. IGMP requires that all routers on a LAN be
configured to run the same version of IGMP. Thus, i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.9
fsIgmpInterfaceJoins
The number of times a group membership has been added on
this interface; that is, the number of times an entry for
this interface has been added to the Cache Table. This
object gives an indication of the amount of IGMP…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.10
fsIgmpInterfaceProxyIfIndexobsolete
Some devices implement a form of IGMP proxying whereby
memberships learned on the interface represented by this
row, cause IGMP Host Membership Reports to be sent on the
interface whose ifIndex value is given by this ob…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.11
fsIgmpInterfaceGroups
The current number of entries for this interface in the
Cache Table.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.12
fsIgmpInterfaceRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.13
fsIgmpInterfaceLastMembQueryIntvl
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages. This value ma…
tenths of secondsUnsigned32r/w
Constraints:
range: 1-655
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.14
fsIgmpInterfaceQuerierPresentTimeout
A timeout interval. If no IGMPv2 queries are heard on this
interface within this timeout interval, the local router
will take over the Querier on the IP subnet to which this
interface is attached.
secondsInteger32r/w
Constraints:
range: 60-300
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.15
fsIgmpInterfaceLeaves
The number of times a group membership has been removed
from this interface; that is, the number of times an entry
for this interface has been deleted from the Cache Table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.16
fsIgmpInterfaceAccessGroupAclName
To control the multicast groups that hosts on the subnet
serviced by an interface can join,Defalut value means
allow all multicast groups can join.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.17
fsIgmpInterfaceEnabled
Evaluates to Enable if this interface are
running IGMP.
P-BRIDGE-MIBEnabledStatus
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.18
fsIgmpInterfaceHostVersion
The version of Host which is running on this interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.1.1.19

fsIgmpInterfaceStaticTable

table
.1.3.6.1.4.1.52642.1.1.10.2.26.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsIgmpInterfaceStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-IGMP-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-IGMP-MIB::fsIgmpInterfaceStaticTable' 
The (conceptual) table listing the interfaces on
which IGMP is enabled.
fsIgmpInterfaceStaticEntry row .1.3.6.1.4.1.52642.1.1.10.2.26.1.2.1
An entry (conceptual row) representing an
interface on which IGMP is enabled.
Indexes
Column Syntax OID
fsIgmpInterfaceStaticInterface
The index of interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.2.1.1
fsIgmpInterfaceStaticGroupAddress
configed the static group address, the multilayer switch
does not accept the packets itself, but only forwards them.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.2.1.2
fsIgmpInterfaceStaticStatus
The status of this entry. Creating the entry enables Igmp static table;
destroying the entry disables Igmp static table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.52642.1.1.10.2.26.1.2.1.3