FS-DVMRPINTEROPERABILITY-MIB Table View

The (conceptual) table listing the interfaces on
which Dvmrp is enabled.

fsDvmrpInterfaceEntry row .1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1

An entry (conceptual row) representing an
interface on which Dvmrp is enabled.

Indexes

fsDvmrpInterfaceIfIndex

Column	Syntax	OID
fsDvmrpInterfaceIfIndex The ifIndex value of this Dvmrp interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.1
fsDvmrpInterfaceDefaultInformation originate means Other routes more specific than 0.0.0.0 may be advertised,only means No DVMRP routes other than 0.0.0.0 are advertised.Default means Disable the command.	Enumerationr/w Enumerated Values: 0 default 1 originate 2 only	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.2
fsDvmrpInterfaceUnicastRoutingStatus Enable DVMRP unicast routing (to send and receive DVMRP routes). This feature is disabled by default.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.3
fsDvmrpInterfaceRejectNonPrunersStatus Prevent peering with nonpruning DVMRP neighbors.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.4
fsDvmrpInterfaceAutoSummaryStatus Disable or Enabled DVMRP autosummarization.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.5
fsDvmrpInterfaceRtsRec The number of received Dvmrp Routes.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.6
fsDvmrpInterfacePoisonReverseRtsRec The number of received poison-reverse Routes.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.7
fsDvmrpInterfaceUniRtAdvertised The number of Advertised unicast Routes.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.8
fsDvmrpInterfaceDvmrpRtAdvertised The number of Advertised dvmrp Routes.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.2.1.9

The (conceptual) table listing the MetricOffset on
which Dvmrp is enabled.

fsDvmrpMetricOffsetEntry row .1.3.6.1.4.1.52642.1.1.10.2.29.1.3.1

An entry (conceptual row) representing an
MetricOffset on which Dvmrp is enabled.

Indexes

fsDvmrpMetricOffsetIfIndex fsDvmrpMetricOffsetInOrOut

Column	Syntax	OID
fsDvmrpMetricOffsetIfIndex The ifIndex value of this Dvmrp interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.3.1.1
fsDvmrpMetricOffsetInOrOut in means Specifies that the increment value is added to incoming DVMRP reports and is reported in mrinfo replies. out means Specifies that the increment value is added to outgoing DVMRP reports for routes from the DVMRP…	Enumeration Enumerated Values: 1 in 2 out	.1.3.6.1.4.1.52642.1.1.10.2.29.1.3.1.2
fsDvmrpMetricOffsetIncrement Value added to the metric of a DVMRP route advertised in a report message,the default increment value for incoming routes is 1,the range is 1 to 31; and the default for outgoing routes is 0,the range is 0 to 31.	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.52642.1.1.10.2.29.1.3.1.3

The (conceptual) table listing the Summary on
which Dvmrp is enabled.

fsDvmrpSummaryEntry row .1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1

An entry (conceptual row) representing
Summary enabled.

Indexes

fsDvmrpIfIndex fsDvmrpSummaryAddress fsDvmrpSummaryMask

Column	Syntax	OID
fsDvmrpIfIndex The ifIndex value of this Dvmrp interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1.1
fsDvmrpSummaryAddress Summary IP address that is advertised instead of the more specific route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1.2
fsDvmrpSummaryMask Mask on the summary IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1.3
fsDvmrpSummaryMetric Metric that is advertised with the summary address.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1.4
fsDvmrpSummaryStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.4.1.5

The (conceptual) table listing the interfaces on
which Dvmrp is enabled.

fsDvmrpMetricEntry row .1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1

An entry (conceptual row) of fsDvmrpMetricTable.

Indexes

fsDvmrpMetricIfIndex fsDvmrpMetric fsDvmrpMetricProtocolId

Column	Syntax	OID
fsDvmrpMetricIfIndex The ifIndex value of this Dvmrp interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1.1
fsDvmrpMetric Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (unreachable).	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1.2
fsDvmrpMetricListAclName The name of an access list,only the multicast destinations that match the access list are reported with the configured metric.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1.3
fsDvmrpMetricProtocolId The number of Protocol Id,only routes learned by the specified routing protocol are advertised in DVMRP report messages.	Enumeration Enumerated Values: 0 default 1 ospf 2 rip 3 static 4 dvmrp	.1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1.4
fsDvmrpMetricStatus The status of this entry. Creating the entry enables Dvmrp Metric; destroying the entry disables Dvmrp Metric.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.5.1.5

The (conceptual) table listing the interfaces on
which Dvmrp is enabled.

fsDvmrpRouteEntry row .1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1

An entry (conceptual row) of fsDvmrpRouteTable.

Indexes

fsDvmrpRouteIpAddress fsDvmrpRouteInterface

Column	Syntax	OID
fsDvmrpRouteIpAddress Clears the longest matched route.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.1
fsDvmrpRouteInterface The interface number of Dvmrp Route.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.2
fsDvmrpRouteDistance For distance, enter the administrative distance to the destination. By default, the administrative distance for DVMRP routes is 0 and take precedence over unicast routing table routes. If you have two paths to a source,…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.3
fsDvmrpRouteMetric Metric associated with a set of destinations for DVMRP reports. A value of 0 means that the route is not advertised. A value of 32 is equivalent to infinity (unreachable).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.4
fsDvmrpRouteUptime How long (in hours, minutes, and seconds) that the route has been in the DVMRP routing table.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.5
fsDvmrpRouteExpires How long (in hours, minutes, and seconds) until the entry is removed from the DVMRP routing table.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.6
fsDvmrpRouteNextHopAddress The address of next hop.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.7
fsDvmrpRouteNextHopInterface The ifindex of next hop.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.8
fsDvmrpRouteStatus The status of this entry. only be used to destroy the entry disables Dvmrp Route,the satuss of enabled will destroy all entry and disabled only destroy one entry associate with fsDvmrpRouteIpAddress and fsDvmrpRouteIn…	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.29.1.6.1.9