FS-DHCP-SNOOPING-MIB Table View

A table provides the mechanism to configure the trust
state for DHCP Snooping purpose at each physical interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

fsSNDhcpIfTrustEntry row .1.3.6.1.4.1.52642.1.1.10.2.42.1.2.1.1

A row instance contains the configuration to enable
or disable trust state for DHCP Snooping at each physical
interface capable of this feature.

Indexes

fsSNDhcpIfTrustIndex

Column	Syntax	OID
fsSNDhcpIfTrustIndex	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.1.1.1
fsSNDhcpIfTrustEnable This object indicates whether the interface is trusted for DHCP Snooping purpose. If this object is set to 'true', the interface is trusted. DHCP packets coming to this interface will be forwarded without checking. If …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.1.1.2

A table provides the mechanism to configure the suppression
state for DHCP Snooping purpose at each physical interface
capable of this feature. Some of the interfaces
(but not limited to) for which this feature might be
applicable are: ifType = ethernetCsmacd(6).

fsSNDhcpIfSuppressionEntry row .1.3.6.1.4.1.52642.1.1.10.2.42.1.2.2.1

A row instance contains the configuration to enable
or disable suppression state for DHCP Snooping at each physical
interface capable of this feature.

Indexes

fsSNDhcpIfSuppressionIndex

Column	Syntax	OID
fsSNDhcpIfSuppressionIndex This object indicates the interface open Suppression	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.2.1.1
fsSNDhcpIfSuppressionEnable This object indicates whether the interface is suppression for DHCP Snooping purpose. If this object is set to 'true', the interface is suppressed. DHCP packets coming to this interface will be ingnored. If this object…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.2.1.2

A table provides the mechanism to configure the DHCP Snooping 
binding database set as IP+MAC Address binding.

fsSNDhcpAddressBindEntry row .1.3.6.1.4.1.52642.1.1.10.2.42.1.2.3.1

A row instance contains the configuration to enable
or disable address bind for DHCP Snooping at each physical
interface capable of this feature.

Indexes

fsSNDhcpAddressBindIndex

Column	Syntax	OID
fsSNDhcpAddressBindIndex This object indicates the interface open Address binding.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.3.1.1
fsSNDhcpAddressBindEnable This object indicates if DHCP Snooping Address Binding is enabled. Setting this object to 'true', DHCP binding entry is set as Address binding entrys; Otherwise, this funciton is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.3.1.2

The false packets statistic information table.

fsDhcpSnpFalsePktStatisticEntry row .1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1

An entry in the snooping false packets statistic information table.

Indexes

fsDhcpSnpStatisticIfIndex fsDhcpSnpStatisticVlanIndex

Column	Syntax	OID
fsDhcpSnpStatisticIfIndex The index of the interfaces.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.1
fsDhcpSnpStatisticVlanIndex The vlan Id.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.2
fsDhcpSnpStatisticIfDescr The description of the interfaces.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.3
fsDhcpSnpStatisticVlanId The vlan Id.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.4
fsChaddrNomatchSrcMacDhcpPktNum The false packets(chaddr in Dhcp packets is not same with source mac-address in ethernet frame) count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.5
fsArpNomatchSnpBindTblPktNum The false Arp packets match in snooping bind table count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.6
fsIpNomatchSnpBindTblPktNum The false Ip packets do not match snooping bind table count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.7
fsNomatchSnpBindTblDhcpPktNum The Dhcp request packets do not match the snooping bind table.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.8
fsUntrustedReplyPktNum The untrusted port Dhcp reply packets count.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.9
fsDhcpPktIfRateDiscardNum DHCP packets that discarded for the rate limit on the interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.2.4.1.10

A table provides the DHCP bindings information learnt by
the device.

fsSNDhcpBindingsEntry row .1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1

A row instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status of this instance.

Indexes

fsSNDhcpBindingsVlan fsSNDhcpBindingsMacAddress fsSNDhcpBindingsAddrType

Column	Syntax	OID
fsSNDhcpBindingsVlan This object indicates the VLAN to which a DHCP client host belongs.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.1
fsSNDhcpBindingsMacAddress This object indicates the MAC address of a DHCP client host.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.2
fsSNDhcpBindingsAddrType This object indicates the type of IP+MAC binding address denoted in fsSNDhcpBindingsIpAddress object.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.3
fsSNDhcpBindingsIpAddress This object indicates the allocated IP address of a DHCP client host.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.4
fsSNDhcpBindingsInterface This object indicates the interface where a DHCP client host connects to.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.5
fsSNDhcpBindingsLeasedTime This object indicates the leased time of this DHCP bindings.	secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.6
fsSNDhcpBindingsStatus This object is used to to manage the deletion of rows in this table. This object only supports active(1) and destroy(6) value. Whenever a DHCP binding is learnt by the device, an entry will be created by the device in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.42.1.3.1.1.7