FS-CLUSTER-MIB Table View

The table is used config the cluster ip address pool.

fsClusterIpPoolEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.18.1

Entry items

Indexes

fsClusterIpPool fsClusterIpMask

Column	Syntax	OID
fsClusterIpPool As the management ip-pool configured by Cluster is altered, the cluster will be deleted. A new cluster will be created according to the newly ip-pool. the management ip-pool must be private address of enterprises??10.0…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.31.1.18.1.1
fsClusterIpMask For the IP address mask created by a cluster. After this value is altered, the previous cluster will be deleted and a new cluster will be created according to the newly created cluster IP mask.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.31.1.18.1.2
fsClusterIpPoolRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.31.1.18.1.3

The table of manage the member device of the cluster or assign uniquely identifies
of the clsuter to any device

fsClusterMemberAddEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.19.1

The table of member add configuration identified by its
mac address and the member id.

Indexes

fsClusterMemberAddSn

Column	Syntax	OID
fsClusterMemberAddSn An arbitrary value which uniquely identifies the cluster member device number. when the value set 0, the value of number will be specify a idle number beween 2 and 240, when the value set 1,the value is invalid.	Integer32 Constraints: range: 0-240	.1.3.6.1.4.1.52642.1.1.10.2.31.1.19.1.1
fsClusterMemberAddMacAddress The MAC address of the member device.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.19.1.2
fsClusterMemberAddRowStatus The row status of this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.31.1.19.1.3

This table contains one row per cluster member,
including the manager device.

fsClusterMemberEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1

An entry containing cluster management information
applicable to a particular cluster member. If the
entry contain the manager device, this entry cannot
be modified.

Indexes

fsClusterMemberSn fsClusterMemberUpMAC fsClusterMemberLcIfx fsClusterMemberUpIfx

Column	Syntax	OID
fsClusterMemberSn An arbitrary value which uniquely identifies the cluster member device number. It ranges from 0 to fsStatusMaxNumberOfMembers - 1. incluing the manager device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.1
fsClusterMemberUpMAC The mac address of the uplink device of the cluster.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.2
fsClusterMemberLcIfx The interface index of port of the member device of the cluster.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.3
fsClusterMemberUpIfx The interface index of port of the uplink device of the cluster.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.4
fsClusterMemberLcPort The port member of the member device of the cluster.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.5
fsClusterMemberUpPort The port member of the uplink device of the cluster.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.6
fsClusterMemberMacAddress The management MAC address of the member device.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.7
fsClusterMemberName The name of the device.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.8
fsClusterMemberIp The private IP address of the member device of the cluster	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.9
fsClusterMemberHops The hop counts between the device and the management device in the topology discovery.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.10
fsClusterMemberState The status of cluster management connectivity between the manage device and a cluster member. Cluster management connectivity is determined by the exchange of cluster management messages between the manage device and a …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.11
fsClusterMemberUpSn The uniquely identifies of the uplink device of the member device, if the uplink device of the member device is null, the fsClusterMemberUpSn vlaue is 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.12
fsClusterMemberLastTopoUpdateTime The last time of the device for cluster topology collect.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.13
fsClusterMemberLastUdpUpdateTime The last update time of the member device of the cluster.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.14
fsClusterMemberNoRecvTopoRspCount The count that no receive the response of the topology collect of the member device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.15
fsClusterMemberNoRecvUdpRspCount The count that no receive the response package of the hello time of the member device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.16
fsClusterMemberReload when the value is set enable,the member device will reboot.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.31.1.20.1.17

This table contains one row per cluster candidate,
A cluster candidate is a device that is currently
eligible to be added to the cluster of a manager
device.  A device is eligible if it satisfies the
following conditions:
1. It supports the cluster management protocol.
          
          
The entries in this table and the entries in
fsMemberTable are mutually exclusive at all
times.  That is, any device that is a cluster
member never shows up in the fsCandidateTable
or is never a candidate at the same time .  Also, any
candidate that shows up in fsCandidateTable should not
appear in fsMemberTable.

fsClusterCandidateEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1

An entry pertaining to a single candidate device.

Indexes

fsClusterCandidateMacAddress fsClusterCandidateUpMAC fsClusterCandidateLcIfx fsClusterCandidateUpIfx

Column	Syntax	OID
fsClusterCandidateMacAddress The management MAC address of a device qualified to to be a cluster member of the manager device cluster.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.1
fsClusterCandidateUpMAC The mac address of the uplink device of the candidate device.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.2
fsClusterCandidateLcIfx The interface index of port of the candidate device of the cluster.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.3
fsClusterCandidateUpIfx The interface index of port of the uplink device of the candidate device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.4
fsClusterCandidateLcPort The port number of the candidate device of the cluster.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.5
fsClusterCandidateUpPort The port number of the uplink device of the candidate device.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.6
fsClusterCandidateUpSn The port number of the uplink device of the candidate device.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.7
fsClusterCandidateHops The hop counts between the candidate device and the management device in the topology discovery.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.8
fsClusterCandidateState The status of cluster management connectivity between the manage device and a cluster candidate. Cluster management connectivity is determined by the exchange of cluster management messages between the manage device and…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.21.1.9

This table contains one row per cluster blacklist,
the device is not permitted to join in any cluster
in the black list table

fsClusterBlacklistEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.22.1

An entry pertaining to a single device in blacklist table.

Indexes

fsClusterBlacklistMacAddress

Column	Syntax	OID
fsClusterBlacklistMacAddress The management MAC address of a device which is in blacklist table .	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.22.1.1
fsClusterBlackListRowStatus The status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.31.1.22.1.2

This table shows current configurations for the password pool of the cluster.

fsClusterPasswordAuthPoolEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.23.1.1

Entry items

Indexes

fsClusterPasswordSn

Column	Syntax	OID
fsClusterPasswordSn The uniquely identifies of the password pool of the cluster.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.1.1.1
fsClusterPassword The password of the password pool.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-126 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.1.1.2
fsClusterPasswordAuthRowStatus The status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.1.1.3

This table shows current configurations for the password of the cluster devices.

fsClusterDeviceAuthPasswordEntry row .1.3.6.1.4.1.52642.1.1.10.2.31.1.23.2.1

Entry items

Indexes

fsClusterDeviceMacAddress

Column	Syntax	OID
fsClusterDeviceMacAddress The mac address of the device.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.2.1.1
fsClusterDevicePassword The auth password of the device.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-126 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.2.1.2
fsClusterDevicePasswordRowStatus The status of the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.31.1.23.2.1.3