FOUNDRY-SN-MRP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
24

snMetroRingTable

table
.1.3.6.1.4.1.1991.1.1.3.29.2.1 · 1 row entry · 24 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snMetroRingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-MRP-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-MRP-MIB::snMetroRingTable' 
Metro ring table.
snMetroRingEntry row .1.3.6.1.4.1.1991.1.1.3.29.2.1.1
An entry of the metro ring table.
Indexes
Column Syntax OID
snMetroRingVLanId
Identifier of a VLAN that controls the metro ring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.1
snMetroRingId
Metro ring identifier.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.2
snMetroRingConfigState
Metro ring state.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.3
snMetroRingRole
Metro ring role.
other(1).........none of the cases in below.
master(2)........device which originates RHP packets.
member(3)........device which forwards RHP packets.
Enumerationr/w
Enumerated Values:
1other
2master
3member
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.4
snMetroRingHelloTime
The time interval to periodically transmit ring health
protocol (RHP). Each unit is millisecond.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.5
snMetroRingPreforwardingTime
The time interval of which a metro ring port is staying
in preforwarding state before changing to forwarding state.
Each unit is millisecond.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.6
snMetroRingPort1
The ifIndex value of port 1 to configure into the metro ring.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.7
snMetroRingPort2
The ifIndex value of port 2 to configure into the metro ring.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.8
snMetroRingName
The metro ring description.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.9
snMetroRingRowStatus
This object is used to create and delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row

If the row exists, the…
Enumerationr/w
Enumerated Values:
1other
2valid
3delete
4create
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.10
snMetroRingOperState
Metro ring operational state.
Enumeration
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.11
snMetroRingTopoGroupId
Topology group ID that controls the metro ring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.12
snMetroRingRHPTransmitted
Ring health protocol (RHP) transmitted counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.13
snMetroRingRHPReceived
Ring health protocol (RHP) received counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.14
snMetroRingStateChanged
Ring state changed counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.15
snMetroRingTCRBPDUReceived
Topology change protocol received counter.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.16
snMetroRingPriPort
The ifIndex value of primary port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.17
snMetroRingSecPort
The ifIndex value of secondary port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.18
snMetroRingPriPortState
Metro ring primary port state.
other(1)...........none of the cases in below.
preforwarding(2)...port transmits RHP packets,
port does not transmit data packets.
forwarding(3)......port transmits RHP …
Enumeration
Enumerated Values:
1other
2preforwarding
3forwarding
4blocking
5disabled
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.19
snMetroRingSecPortState
Metro ring secondary port state.
other(1)...........none of the cases in below.
preforwarding(2)...port transmits RHP packets,
port does not transmit data packets.
forwarding(3)......port transmits RH…
Enumeration
Enumerated Values:
1other
2preforwarding
3forwarding
4blocking
5disabled
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.20
snMetroRingPriPortType
Metro ring primary port type.
other(1).....none of the cases in below.
regular(2)...port is configured to operate on a single ring.
tunnel(3)....port is configured to operate on multiple rings.
Enumeration
Enumerated Values:
1other
2regular
3tunnel
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.21
snMetroRingSecPortType
Metro ring secondary port type.
other(1).....none of the cases in below.
regular(2)...port is configured to operate on a single ring.
tunnel(3)....port is configured to operate on multiple rings.
Enumeration
Enumerated Values:
1other
2regular
3tunnel
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.22
snMetroRingPriPortActivePort
The ifIndex value of active primary port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.23
snMetroRingSecPortActivePort
The ifIndex value of active secondary port.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.3.29.2.1.1.24