FOUNDRY-SN-APPLETALK-MIB Table View

AppleTalk socket priority table.

snRtATSocketPriorityEntry row .1.3.6.1.4.1.1991.1.2.10.2.1

An entry in the AppleTalk socket priority table.

Indexes

snRtATSocketPrioritySocket

Column	Syntax	OID
snRtATSocketPrioritySocket Socket number for a socket priority entry.	Integer32 Constraints: range: 1-254	.1.3.6.1.4.1.1991.1.2.10.2.1.1
snRtATSocketPriorityPriority The Standalone router Priority level applies to a socket number: low(0) -- low prority high(1) -- high prority. The BigIron Priority levels applies to a socket number are: level0(0), level1(1), level2(2), level3(3), l…	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.1991.1.2.10.2.1.2

AppleTalk interface zone filter table.

snRtATPortZoneFilterEntry row .1.3.6.1.4.1.1991.1.2.10.3.1

An entry in the AppleTalk interface zone filter table.

Indexes

snRtATPortZoneFilterPortIndex snRtATPortZoneFilterZone

Column	Syntax	OID
snRtATPortZoneFilterPortIndex The port index for a zone filter entry.	FOUNDRY-SN-IP-MIBPortIndex	.1.3.6.1.4.1.1991.1.2.10.3.1.1
snRtATPortZoneFilterZone The zone name granted for this filter.	ATName Type Constraints: range: 0..32	.1.3.6.1.4.1.1991.1.2.10.3.1.2
snRtATPortZoneFilterAction Action to take if the AppleTalk packet match with this filter.	FOUNDRY-SN-IP-MIBActionr/w Type Values: 0 deny 1 permit	.1.3.6.1.4.1.1991.1.2.10.3.1.3
snRtATPortZoneFilterRtmpEnable Enable/disable RTMP filtering.	FOUNDRY-SN-IP-MIBRtrStatusr/w Type Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.2.10.3.1.4
snRtATPortZoneFilterRowStatus To create or delete a zone filter entry.	FOUNDRY-SN-IP-MIBRowStsr/w Type Values: 1 other 2 valid 3 delete 4 create	.1.3.6.1.4.1.1991.1.2.10.3.1.5

AppleTalk port table.

snRtATPortEntry row .1.3.6.1.4.1.1991.1.2.10.4.1

An entry in the AppleTalk port table.

Indexes

snRtATPortIndex

Column	Syntax	OID
snRtATPortIndex The port index for port table entry.	FOUNDRY-SN-IP-MIBPortIndex	.1.3.6.1.4.1.1991.1.2.10.4.1.1
snRtATPortArpAge The time in minutes an ARP entry can be valid without relearning. 0 - Don't age.	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.1991.1.2.10.4.1.2
snRtATPortState The up and down state of this port.	Enumeration Enumerated Values: 1 other 2 down 3 up	.1.3.6.1.4.1.1991.1.2.10.4.1.3
snRtATPortSeedRouter This port was configured to seed or non-seed router.	Enumeration Enumerated Values: 1 other 2 seedRouter 3 nonSeedRouter	.1.3.6.1.4.1.1991.1.2.10.4.1.4
snRtATPortOperationMode The operation mode of this port.	Enumeration Enumerated Values: 1 other 2 seedRouter 3 nonSeedRouter 4 notOperational 5 routingDisabled	.1.3.6.1.4.1.1991.1.2.10.4.1.5

AppleTalk forwarding cache table.

snRtATFwdCacheEntry row .1.3.6.1.4.1.1991.1.2.10.5.1

An entry in the AppleTalk forwarding cache table.

Indexes

snRtATFwdCacheIndex

Column	Syntax	OID
snRtATFwdCacheIndex The table index for an AppleTalk forwarding cache table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.2.10.5.1.1
snRtATFwdCacheNetAddr The AppleTalk network address of a station.	DdpNodeAddress Type Constraints: range: 3	.1.3.6.1.4.1.1991.1.2.10.5.1.2
snRtATFwdCacheMacAddr The Mac address of an AppleTalk station.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.1991.1.2.10.5.1.3
snRtATFwdCacheNextHop The next hop router network address.	DdpNodeAddress Type Constraints: range: 3	.1.3.6.1.4.1.1991.1.2.10.5.1.4
snRtATFwdCacheOutgoingPort The outgoing port of which packets will forward to. Return port value of zero to indicate no outgoing port associated to this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.2.10.5.1.5
snRtATFwdCacheType The 'dynamic' or 'permanent' type for an AppleTalk forwarding cache table entry.	Enumeration Enumerated Values: 1 dynamic 2 permanent	.1.3.6.1.4.1.1991.1.2.10.5.1.6
snRtATFwdCacheAction The action to take.	Enumeration Enumerated Values: 1 other 2 forward 3 forUs 4 waitForArp 5 dropPacket	.1.3.6.1.4.1.1991.1.2.10.5.1.7
snRtATFwdCacheVLanId The VLAN ID for an AppleTalk forwarding cache table entry. Return VLAN ID value of zero to indicate no VLAN associated to this entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.2.10.5.1.8

AppleTalk zone table.

snRtATZoneEntry row .1.3.6.1.4.1.1991.1.2.10.6.1

An entry in the AppleTalk zone table.

Indexes

snRtATZoneIndex

Column	Syntax	OID
snRtATZoneIndex The table index for an AppleTalk zone table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.2.10.6.1.1
snRtATZoneNetStart The first AppleTalk network address in the range of this zone name.	ATNetworkNumber Type Constraints: range: 2	.1.3.6.1.4.1.1991.1.2.10.6.1.2
snRtATZoneNetEnd The last AppleTalk network address in the range of this zone name.	ATNetworkNumber Type Constraints: range: 2	.1.3.6.1.4.1.1991.1.2.10.6.1.3
snRtATZoneName The zone name.	ATName Type Constraints: range: 0..32	.1.3.6.1.4.1.1991.1.2.10.6.1.4

AppleTalk additional zone filter table. Additional zones
are those zones that do not match any zones defined in the
zone filter table.

snRtATAddZoneFilterEntry row .1.3.6.1.4.1.1991.1.2.10.7.1

An entry in the AppleTalk additional zone filter table.

Indexes

snRtATAddZoneFilterPortIndex

Column	Syntax	OID
snRtATAddZoneFilterPortIndex The port index for additional zone filter table entry.	FOUNDRY-SN-IP-MIBPortIndex	.1.3.6.1.4.1.1991.1.2.10.7.1.1
snRtATAddZoneFilterAction Action to take if no zone filter match.	FOUNDRY-SN-IP-MIBActionr/w Type Values: 0 deny 1 permit	.1.3.6.1.4.1.1991.1.2.10.7.1.2
snRtATAddZoneFilterRtmpEnable Enable/disable RTMP filtering on additional zone.	FOUNDRY-SN-IP-MIBRtrStatusr/w Type Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.2.10.7.1.3