FOUNDRY-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
14

snAgentPoePortTable

table
.1.3.6.1.4.1.1991.1.1.2.14.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snAgentPoePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-POE-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-POE-MIB::snAgentPoePortTable' 
A table of POE port information.
snAgentPoePortEntry row .1.3.6.1.4.1.1991.1.1.2.14.2.2.1
A row in the POE port table.
Indexes
Column Syntax OID
snAgentPoePortNumber
The port number in ifIndex value.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.1
snAgentPoePortControl
Control inline power on/off to a port. If a port does not
have inline power capability, reading this object returns
'other(1)'.
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
4enableLegacyDevice
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.2
snAgentPoePortWattage
Adjust the inline power wattage. Valid value between 1000
to 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is milliwatts. This object can only be
set after snSwIfInLinePowerControl has been set to 'enable(3)'
or 'ena…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.3
snAgentPoePortClass
Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT).
This object can only be set after snSwIfInLinePowerControl
has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
a port does no…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.4
snAgentPoePortPriority
Inline power allocation priority for the power device
0- Not a POE port, 1- Critical, 2- High, 3- Low,
4- Medium, 5- other.
Enumerationr/w
Enumerated Values:
0invalid
1critical
2high
3low
4medium
5other
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.5
snAgentPoePortConsumed
Inline power consumed by the port. Each unit is milliwatts.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.6
snAgentPoePortType
Inline Power device type 802.3af, 802.3at or Legacy device.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.7

snAgentPoeModuleTable

table
.1.3.6.1.4.1.1991.1.1.2.14.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snAgentPoeModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-POE-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-POE-MIB::snAgentPoeModuleTable' 
A table of POE Module configuration.
snAgentPoeModuleEntry row .1.3.6.1.4.1.1991.1.1.2.14.3.1.1
A row in the POE Module table.
Indexes
Column Syntax OID
snAgentPoeModuleNumber
This objects talks about POE module number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.1
snAgentPoeModuleBudget
This objects talks about module power budget in watts.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.2
snAgentPoeModuleMaxPDTypeSupport
This object talks about the POE module type which is capable to support Power Device (PD) type
ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also
support ieee802.3af but reve…
Enumeration
Enumerated Values:
0ieee802dot3af
1ieee802dot3at
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.3

snAgentPoeUnitTable

table
.1.3.6.1.4.1.1991.1.1.2.14.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the brocade variant from /opt/observium/mibs/brocade.
Command help
Walk snAgentPoeUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-POE-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-POE-MIB::snAgentPoeUnitTable' 
A table of POE informaion for each unit. Only the unit
that has POE capability appears in a table row
snAgentPoeUnitEntry row .1.3.6.1.4.1.1991.1.1.2.14.4.1.1
A row in the POE Unit table.
Indexes
Column Syntax OID
snAgentPoeUnitIndex
The Index to POE unit Table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.1
snAgentPoeUnitPowerCapacityTotal
This object shows the total inline power capacity available on that unit (device), measured in mWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.2
snAgentPoeUnitPowerCapacityFree
This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.3
snAgentPoeUnitPowerAllocationsRequestsHonored
This object shows number of times the inline power allocations requests honored on that unit (device).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.4