FORTINET-CORE-MIB
MIB module for Fortinet network devices.
|
Imported Objects
| ifIndex | IF-MIB |
| InetAddress, InetAddressPrefixLength, InetAddressType | INET-ADDRESS-MIB |
| MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP | SNMPv2-CONF |
| sysName | SNMPv2-MIB |
| Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, enterprises | SNMPv2-SMI |
| DisplayString, TEXTUAL-CONVENTION | SNMPv2-TC |
Type Definitions (4)
| Name | Base Type | Values/Constraints |
|---|---|---|
 FnBoolState | Enumeration | disabled(1), enabled(2) |
| FnIndex | Integer32 | range: 0..2147483647 |
| FnLanguage | Enumeration | english(1), simplifiedChinese(2), japanese(3), korean(4), spanish(5), traditionalChinese(6), french(7), portuguese(8), undefined(255) |
| FnSessionProto | Enumeration | ip(0), icmp(1), igmp(2), ipip(4), tcp(6), egp(8), pup(12), udp(17), idp(22), ipv6(41), rsvp(46), gre(47), esp(50), ah(51), ospf(89), pim(103), comp(108), raw(255) |
Objects
  fortinet  | .1.3.6.1.4.1.12356 | |
| fnCoreMib | .1.3.6.1.4.1.12356.100 | |
| fnCommon | .1.3.6.1.4.1.12356.100.1 | |
| fnSystem | .1.3.6.1.4.1.12356.100.1.1 | |
 fnSysSerial | .1.3.6.1.4.1.12356.100.1.1.1 | |
| fnMgmt | .1.3.6.1.4.1.12356.100.1.2 | |
| fnMgmtLanguage | .1.3.6.1.4.1.12356.100.1.2.1 | |
| fnAdmin | .1.3.6.1.4.1.12356.100.1.2.100 | |
| fnAdminNumber | .1.3.6.1.4.1.12356.100.1.2.100.1 | |
 fnAdminTable | .1.3.6.1.4.1.12356.100.1.2.100.2 | |
 fnAdminEntry | .1.3.6.1.4.1.12356.100.1.2.100.2.1 | |
 fnAdminIndex | .1.3.6.1.4.1.12356.100.1.2.100.2.1.1 | |
| fnAdminName | .1.3.6.1.4.1.12356.100.1.2.100.2.1.2 | |
| fnAdminAddrType | .1.3.6.1.4.1.12356.100.1.2.100.2.1.3 | |
| fnAdminAddr | .1.3.6.1.4.1.12356.100.1.2.100.2.1.4 | |
| fnAdminMask | .1.3.6.1.4.1.12356.100.1.2.100.2.1.5 | |
| fnTraps | .1.3.6.1.4.1.12356.100.1.3 | |
| fnTrapsPrefix | .1.3.6.1.4.1.12356.100.1.3.0 | |
| fnTrapObjects | .1.3.6.1.4.1.12356.100.1.3.1 | |
| fnGenTrapMsg | .1.3.6.1.4.1.12356.100.1.3.1.1 | |
| fnMIBConformance | .1.3.6.1.4.1.12356.100.10 |
Notifications/Traps
| Name | OID | Description |
|---|---|---|
 fnTrapCpuThreshold | .1.3.6.1.4.1.12356.100.1.3.0.101 | Indicates that the CPU usage has exceeded the configured threshold. |
| fnTrapMemThreshold | .1.3.6.1.4.1.12356.100.1.3.0.102 | Indicates memory usage has exceeded the configured threshold. |
| fnTrapLogDiskThreshold | .1.3.6.1.4.1.12356.100.1.3.0.103 | sage has exceeded the configured threshold. Only available on devices with log disks. |
| fnTrapTempHigh | .1.3.6.1.4.1.12356.100.1.3.0.104 | ure sensor on the device has exceeded its threshold. Not all devices have thermal sensors. See manual for specifications. |
| fnTrapVoltageOutOfRange | .1.3.6.1.4.1.12356.100.1.3.0.105 | ls have fluctuated outside of normal levels. Not all devices have voltage monitoring instrumentation. See manual for specifications. |
| fnTrapPowerSupplyFailure | .1.3.6.1.4.1.12356.100.1.3.0.106 | ly failure detected. Not available on all models. Available on some devices which support redundant power supplies. See manual for specifications. |
| fnTrapAmcIfBypassMode | .1.3.6.1.4.1.12356.100.1.3.0.107 | erface entered bypass mode. Available on models with an AMC expansion slot. Used with the ASM-CX4 and ASM-FX2 cards. |
| fnTrapFanFailure | .1.3.6.1.4.1.12356.100.1.3.0.108 | ure has been detected. Not all devices have fan sensors. See manual for specifications. |
| fnTrapIfEnterBypassMode | .1.3.6.1.4.1.12356.100.1.3.0.109 | Interface entered bypass mode. Available on models with bypass ports. |
| fnTrapIfExitBypassMode | .1.3.6.1.4.1.12356.100.1.3.0.110 | Interface exited bypass mode. Available on models with bypass ports. |
| fnTrapIpChange | .1.3.6.1.4.1.12356.100.1.3.0.201 | Indicates that the IP address of the specified interface has been changed. |
| fnTrapTest | .1.3.6.1.4.1.12356.100.1.3.0.999 | Trap sent for diagnostic purposes by an administrator. |