Standard view Table view

FORCE10-COPY-CONFIG-MIB

Dell Networking OS Copy Config MIB provides copying of running-config to
to startup-config and vice-versa, and Dell Networking OS files to local
disk or other system via ftp or tftp.

Source file: FORCE10-COPY-CONFIG-MIB
Last revised: 14 May 2009, 13:00 UTC
Identity: f10CopyConfigMib
Base OID: 1.3.6.1.4.1.6027.3.5

Imported Objects

FORCE10-SMI	f10Mgmt
INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC	DisplayString RowStatus TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the force10 MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'FORCE10-COPY-CONFIG-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FORCE10-COPY-CONFIG-MIB::f10CopyConfigMib'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCE10-COPY-CONFIG-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCE10-COPY-CONFIG-MIB::f10CopyConfigMib'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (28)

f10CopyConfigMib		`.1.3.6.1.4.1.6027.3.5`
f10CopyConfigObjects		`.1.3.6.1.4.1.6027.3.5.1`
f10CopyConfig		`.1.3.6.1.4.1.6027.3.5.1.1`
f10CopyTable		`.1.3.6.1.4.1.6027.3.5.1.1.1`
f10CopyEntry	copyConfigIndex	`.1.3.6.1.4.1.6027.3.5.1.1.1.1`
copyConfigIndex	Integer32	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.1`
copyUserPassword r/w	OctetString	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.10`
copyState	F10ConfigCopyState	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.11`
copyTimeStarted	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.12`
copyTimeCompleted	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.13`
copyFailCause	F10ConfigCopyFailCause	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.14`
copyEntryRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.15`
copyServerInetAddressType r/w	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.16`
copyServerInetAddress r/w	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.17`
copySrcFileType r/w	F10ConfigFileType	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.2`
copySrcFileLocation r/w	F10ConfigFileLocation	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.3`
copySrcFileName r/w	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.4`
copyDestFileType r/w	F10ConfigFileType	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.5`
copyDestFileLocation r/w	F10ConfigFileLocation	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.6`
copyDestFileName r/w	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.7`
copyServerAddress deprecated r/w	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.8`
copyUserName r/w	OctetString	`.1.3.6.1.4.1.6027.3.5.1.1.1.1.9`
f10CopyConfigTraps		`.1.3.6.1.4.1.6027.3.5.1.2`
copyAlarmMibNotifications		`.1.3.6.1.4.1.6027.3.5.1.2.0`
copyAlarmVariable		`.1.3.6.1.4.1.6027.3.5.1.2.1`
copyAlarmLevel	Integer32	`.1.3.6.1.4.1.6027.3.5.1.2.1.1`
copyAlarmString	OctetString	`.1.3.6.1.4.1.6027.3.5.1.2.1.2`
copyAlarmIndex	Integer32	`.1.3.6.1.4.1.6027.3.5.1.2.1.3`

Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

FORCE10-COPY-CONFIG-MIBforce10selected
- FORCE10-SMIforce101 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- INET-ADDRESS-MIBrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-TCrfc1 symbol
    - SNMPv2-SMIrfcshared1 symbol
- SNMPv2-CONFrfcdefault fallback2 symbols
  - SNMPv2-SMIrfcshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared5 symbols
- SNMPv2-TCrfcdefault fallbackshared3 symbols

Dependency-first compile order

Type Definitions (4)

F10ConfigCopyFailCause	Enumeration	`badFileName(1)` `copyInProgress(2)` `diskFull(3)` `fileExist(4)` `fileNotFound(5)` `timeout(6)` `unknown(7)`
F10ConfigCopyState	Enumeration	`running(1)` `successful(2)` `failed(3)`
F10ConfigFileLocation	Enumeration	`flash(1)` `slot0(2)` `tftp(3)` `ftp(4)` `scp(5)` `usbflash(6)` `nfsmount(7)`
F10ConfigFileType	Enumeration	`ftosFile(1)` `runningConfig(2)` `startupConfig(3)`

Notifications / Traps (5)

Name	OID	Description
copyConfigCompleted copyAlarmLevel copyAlarmString copyAlarmIndex	`.1.3.6.1.4.1.6027.3.5.1.2.0.1`	The agent generate this trap when a copy operational is completed.
configConflict copyAlarmLevel copyAlarmString copyAlarmIndex	`.1.3.6.1.4.1.6027.3.5.1.2.0.2`	The agent generate this trap when a configuration conflict found during audit.
configConflictClear copyAlarmLevel copyAlarmString copyAlarmIndex	`.1.3.6.1.4.1.6027.3.5.1.2.0.3`	The agent generate this trap when a configuration conflict resolved during audit.
batchConfigCommitProgress copyAlarmLevel copyAlarmString copyAlarmIndex	`.1.3.6.1.4.1.6027.3.5.1.2.0.4`	The agent generate this trap when a configuration commit is initiated.
batchConfigCommitCompleted copyAlarmLevel copyAlarmString copyAlarmIndex	`.1.3.6.1.4.1.6027.3.5.1.2.0.5`	The agent generate this trap when a configuration commit is completed.