FEC-SYSTEL-MIB Table View

This table contains general information about system phones.

systemPhoneEntry row .0.64.1.1.1

Indexes

systemPhoneTerminalIndex

Column	Syntax	OID
systemPhoneTerminalIndex Reference to mpsTerminalTable, a unique value for each system phone.	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.1.1.1.1
systemPhoneDeviceType Specified type of system phone.	SystelDeviceTyper/w Type Values: 20 cs290 22 cs410 23 cs290u 24 cs410u 25 cs400 32 ips290 33 ips400 34 ips290plus 64 s530 65 s560 144 ost-40 145 ost-80 160 ip120 161 ip140 162 dect150 163 dect200-b 164 dect200-m 165 ip130 176 de310-ip-pro 177 de410-ip-pro 178 de700-ip-pro 179 de900-ip-pro 180 n510-ip-pro 181 n720-ip-pro 182 n720-dm-pro	.0.64.1.1.1.2
systemPhoneDevicePin The device PIN of the system phone (eg. to protect the configuration, settings or number programming menu of system phone).	OctetStringr/w Constraints: range: 4-4	.0.64.1.1.1.3
systemPhoneConfigDate The date of last configuration synchronization between PBX and system phone.		.0.64.1.1.1.4
systemPhoneConfigSequenceNumber A unique sequence number of the configuration data saved in the PBX and synchronized with the system phone.	Integer32 Constraints: range: 0-255	.0.64.1.1.1.5
systemPhoneOperStatus Operational state of the system phone.	Enumeration Enumerated Values: 1 connected 2 unconnected 3 unsupported	.0.64.1.1.1.6
systemPhoneAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.1.1.1.7

This table contains information about audio settings of system phones.
An entry in this table will also be deleted if the related
systemPhoneTable entry is deleted.

systemPhoneAudioEntry row .0.64.1.2.1

Indexes

systemPhoneAudioIndex

Column	Syntax	OID
systemPhoneAudioIndex Reference to the mpsTerminalTable.	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.1.2.1.1
systemPhoneAudioFac Facility settings for audio control: out-ringing : Normal ringing tones can be heard on the internal speaker [0] or on the internal speaker and an additional speaker connected to 'au…	Bitsr/w Enumerated Values: 0 out-ringing 1 out-paging 2 out-listening 3 out-handsfree 4 out-answ-mach 5 headset 6 handsfree-mute 7 beep-negative-ack 8 beep-positive-ack 9 beep-call-waiting-repeat	.0.64.1.2.1.2
systemPhoneAudioHeadsetType The headset type. Value currently only used within the system phone, but must be saved in the PBX.	Integer32r/w Constraints: range: 0-255	.0.64.1.2.1.3
systemPhoneAudioVolSpeaker Specifies volume setting for telephone speaker. For NG phones range was changed (0 .. 10).	SystelAudioVolumer/w Type Constraints: range: 0..10	.0.64.1.2.1.4
systemPhoneAudioVolHandset Specifies volume setting for telephone handset.	Integer32r/w Constraints: range: 0-3	.0.64.1.2.1.5
systemPhoneAudioVolCallWaitingBeep Specifies volume setting for call waiting tone. For NG phones range was changed (0 .. 10).	SystelAudioVolumer/w Type Constraints: range: 0..10	.0.64.1.2.1.6
systemPhoneAudioVolDoNotDisturbBeep Specifies volume setting for do not disturb tone. For NG phones range was changed (0 .. 10).	SystelAudioVolumer/w Type Constraints: range: 0..10	.0.64.1.2.1.7
systemPhoneAudioVolAppointedTimeBeep Specifies volume setting for appointed time call tone.	Integer32r/w Constraints: range: 0-6	.0.64.1.2.1.8
systemPhoneAudioVolNotifyBeep Specifies volume setting for notify beep tone.	Integer32r/w Constraints: range: 0-2	.0.64.1.2.1.9
systemPhoneAudioVolAnswMachOKBeep Specifies volume setting for answering machine acknowledgement tone.	Integer32r/w Constraints: range: 0-2	.0.64.1.2.1.10
systemPhoneAudioAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.1.2.1.11
systemPhoneAudioNGVolHeadset Specifies volume setting for headset. This mib item is only important for NG phones.	SystelAudioVolumer/w Type Constraints: range: 0..10	.0.64.1.2.1.12
systemPhoneAudioNGVolAcknowledgeBeep Specifies volume setting for acknowledgement beep tone. This mib item is only important for NG phones.	SystelAudioVolumer/w Type Constraints: range: 0..10	.0.64.1.2.1.13
systemPhoneAudioNGMicHeadsetResp Specifies responsivity settings for microphone of headset. This mib item is only important for NG phones.	Integer32r/w Constraints: range: 1-3	.0.64.1.2.1.14

This table contains system phone configuration concerning display and
operations. An entry in this table will also be deleted if the related
systemPhoneTable entry is deleted.

systemPhoneFacilityEntry row .0.64.1.3.1

Indexes

systemPhoneFacIndex

Column	Syntax	OID
systemPhoneFacIndex Reference to the mpsTerminalTable.	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.1.3.1.1
systemPhoneFacDisplayGeneral Facility settings for display and operation control: softkey-style: (0) use of lower case, (1) use of upper case for the softkeys. clir: (0) activate number suppression (outgoing CLIR active), (1) dea…	Bitsr/w Enumerated Values: 0 softkey-style 1 clir 2 colr 3 call-end-info 4 do-not-disturb 5 softkey-local-phonebook 6 dial-option 7 uus-inhibit-ctrl-int 8 uus-inhibit-ctrl-ext 9 auto-call-accept	.0.64.1.3.1.2
systemPhoneFacDisplayDuringCall Information shown on display during an active call: number-and-costOrDuration(1): Shows call number and cost, if no costs are provided by the PSTN instead the call number and the duration will be shown. n…	Enumerationr/w Enumerated Values: 1 number-and-costOrDuration 2 number-and-costOrNothing 3 number-and-duration 4 number-and-time 5 numberOnly 6 date-and-time-only	.0.64.1.3.1.3
systemPhoneFacLedConf Information of status LED function for elmeg CS/IP series system phones: indication-off: Status LED function is off. indication-all: Status LED blinks on all new events. indication-message: Status LED blinks only if a n…	Enumerationr/w Enumerated Values: 1 indication-off 2 indication-all 3 indication-message	.0.64.1.3.1.4
systemPhoneFacDispLang The current display language.	SystelLanguager/w Type Values: 1 german 2 dutch 3 english 5 italian 6 danish 7 spanish 8 swedish 10 french 11 portuguese 14 czech 16 norwegian 17 greek 20 icelandic 21 polish 22 hungarian 23 russian 24 romanian 25 slovak	.0.64.1.3.1.5
systemPhoneFacCharacterSet The character set of the display language: latin-ext: Latin character set with extensions. latin-greek: Latin and greek character set. latin-cyrillic: Latin and cyrillic character set.	Enumerationr/w Enumerated Values: 1 latin-ext 2 latin-greek 3 latin-cyrillic	.0.64.1.3.1.6
systemPhoneFacAutoCallAcceptTime Setting of automatic call acceptance time, only used if 'headset' in systemPhoneAudioFac is enabled(1) and a function-key 'autoanswer' is configured and active on the system phone. For NG phones there are new values ava…	Enumerationr/w Enumerated Values: 1 immediately 2 sec-5 3 sec-10 4 sec-15 5 sec-20	.0.64.1.3.1.7
systemPhoneFacCallWaitInt Setting for intern call waiting: off: call waiting signal is disabled. on: call waiting signal is activated (user is noticed by a single tone).	Enumerationr/w Enumerated Values: 1 off 2 on	.0.64.1.3.1.8
systemPhoneFacCallWaitExt Setting for extern call waiting: off: call waiting signal is disabled. on: call waiting signal is activated (user is noticed by a single tone).	Enumerationr/w Enumerated Values: 1 off 2 on	.0.64.1.3.1.9
systemPhoneFacDoNotDisturb Information of do not disturb setup: disable: Do not disturb option is disabled. quiet: Do not disturb option is enabled, without notice tone. notice: Do not disturb option is enabled, a single notice tone indicates a…	Enumerationr/w Enumerated Values: 1 disable 2 quiet 3 notice	.0.64.1.3.1.10
systemPhoneFacAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.1.3.1.11
systemPhoneFacNGDisplayLight Settings for display light - this mib item is only important for NG system phones: sec-x: After an user action (e.g. keypress) display light is on for dedicated time x. always-off: Display light is always off. always-…	Enumerationr/w Enumerated Values: 1 sec-15 2 sec-30 3 sec-45 4 sec-60 5 sec-75 6 sec-90 7 sec-105 8 sec-120 9 sec-135 64 always-off 128 always-on	.0.64.1.3.1.12
systemPhoneFacNGDoNotDisturbTone Information of do not disturb setup for NG system phones: 0: NG system phone signals incoming calls/messages without any tone. 1..4: NG system phone signals incoming calls/messages with special tone. Note: If there…	Integer32r/w Constraints: range: 0-4	.0.64.1.3.1.13
systemPhoneFacNGLedConf Information of status LED function for NG system phones: new-message: Status LED blinks if new message received, new-call: Status LED blinks if call was missed, call-state: Status LED blinks in call state.	Bitsr/w Enumerated Values: 0 message-received 1 call-received 2 call-state	.0.64.1.3.1.14

This table contains configuration data assigned to a specific MSN
of the system phone.

systemPhoneMSNEntry row .0.64.1.4.1

Indexes

systemPhoneMSNExtTermIndex

Column	Syntax	OID
systemPhoneMSNExtTermIndex A reference to the mpsExtensionTerminalTable.	SystelExtTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.1.4.1.1
systemPhoneMSNMelodyExt The variable contains the number index of a specific melody for signalling external calls. This melody is generated within the system phone.	Integer32r/w Constraints: range: 0-19	.0.64.1.4.1.2
systemPhoneMSNVolumeExt Volume of the external ringing melody: 0..6: Muted .. Loud 7: Increasing volume. NG system phones have different ranges of values: 1..9: Soft .. Loud 10: Increasing volume.	Integer32r/w Constraints: range: 0-10	.0.64.1.4.1.3
systemPhoneMSNMelodyInt The variable contains the number index of a specific melody for signalling internal calls. This melody is generated within the system phone.	Integer32r/w Constraints: range: 0-19	.0.64.1.4.1.4
systemPhoneMSNVolumeInt Volume of the internal ringing melody: 0..6: Muted .. Loud 7: Increasing volume. NG system phones have different ranges of values: 1..9: Soft .. Loud 10: Increasing volume.	Integer32r/w Constraints: range: 0-10	.0.64.1.4.1.5
systemPhoneMSNCfNumber Number of a call forwarding target, specific for this MSN.	OctetStringr/w Constraints: range: 0-26	.0.64.1.4.1.6
systemPhoneMSNCdNumber Number of a call deflection target, specific for this MSN.	OctetStringr/w Constraints: range: 0-26	.0.64.1.4.1.7
systemPhoneMSNAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.1.4.1.8

This table contains data assigned to network/ip-configuration of the
system phone.

systemPhoneIPEntry row .0.64.1.5.1

Indexes

systemPhoneIPIndex

Column	Syntax	OID
systemPhoneIPIndex A reference to systemPhoneTable (or mpsTerminalTable).	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.1.5.1.1
systemPhoneIPFacility IP facility bit matrix: dhcp: 0, system phone uses a dhcp-server, the ip address of this dhcp-server is stored in systemIPGatewayAddress. 1, system phone don't uses a dhcp-server, the ip address stored…	Bits Enumerated Values: 0 dhcp 1 gateway-equals-registrar	.0.64.1.5.1.2
systemPhoneIPMacAddress Variable contains the MAC-Address of the system phone.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.0.64.1.5.1.3
systemPhoneIPAddress Variable contains the IP-Address of the system phone.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.0.64.1.5.1.4
systemPhoneIPGatewayAddress Variable contains the IP address of standard gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.0.64.1.5.1.5
systemPhoneIPRegistrarAddress Variable contains the IP address of registrar server (in system phone the registrar server is mentioned as SysServer).	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.0.64.1.5.1.6
systemPhoneIPSubnetmask Variable contains the subnetmask which the system phone will use for the IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.0.64.1.5.1.7

This table contains information about base and extension modules of
system phones.

systemPhoneModuleEntry row .0.64.2.1.1

Indexes

systemPhoneModuleIndex

Column	Syntax	OID
systemPhoneModuleIndex A unique value for system phone itself (base) or any extension module (e.g. T400, T400/2, T500, Answering machine).	SystelModuleIndexr/w Type Constraints: range: 1..65535	.0.64.2.1.1.1
systemPhoneModuleTermIndex A reference to systemPhoneTable (or mpsTerminalTable).	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.2.1.1.2
systemPhoneModuleType The module type: base: module is the system phone itself. t400: module is a keypad extension T400. ab-mod: module is an answering machine. t400-2: module is a keypad extension T400/2. t500: module is a NG Phone keypad e…	Enumerationr/w Enumerated Values: 1 base 2 t400 3 ab-mod 4 t400-2 5 t500 6 gigaset-base 7 gigaset-expansion-module	.0.64.2.1.1.3
systemPhoneModulePrio The variable defines the module position docked to the base system phone.	Integer32r/w Constraints: range: 0-3	.0.64.2.1.1.4
systemPhoneModuleVersion Information about the module's software version.	OctetString Constraints: range: 0-9	.0.64.2.1.1.5
systemPhoneModuleRelDate Information about the module's release date.	OctetString Constraints: range: 0-17	.0.64.2.1.1.6
systemPhoneModuleSerNum The serial number of the module.	OctetStringr/w Constraints: range: 0-15	.0.64.2.1.1.7
systemPhoneModuleOperStatus Operational status of the module.	Enumeration Enumerated Values: 1 connected 2 unconnected 3 unsupported	.0.64.2.1.1.8
systemPhoneModuleAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.2.1.1.9

This table contains information concerning system phone function
key configuration.

systemPhoneFunctionKeyEntry row .0.64.2.2.1

Indexes

systemPhoneFKIndex

Column	Syntax	OID
systemPhoneFKIndex A unique value for each function key of a system phone.	SystelFunctionKeyIndexr/w Type Constraints: range: 1..65535	.0.64.2.2.1.1
systemPhoneFKModuleIndex Variable contains the index of the systemPhoneModuleTable as reference.	SystelModuleIndexr/w Type Constraints: range: 1..65535	.0.64.2.2.1.2
systemPhoneFKButton Identifier for each function key. Valid range for systemPhoneFKButton for T400 is 1..22. Valid range for systemPhoneFKButton for T500 is 1..30.	SystelFKButtonIndexr/w Type Constraints: range: 1..30	.0.64.2.2.1.3
systemPhoneFKLevel Identifier for the (shift) level of each function key. One short press activates level 0 function, double press activates level 1 function.	SystelFKLevelr/w Type Constraints: range: 0..1	.0.64.2.2.1.4
systemPhoneFKDescription The variable contains a short description of the key type, which may be printed on the system telephone label.	OctetStringr/w Constraints: range: 0-20	.0.64.2.2.1.5
systemPhoneFKType Specifies type of function key: dial-standard: standard speed dialing key. dial-dtmf: dials a DTMF sequence. dial-keypad: dials a keypad sequence. extension-subscriber: line key with LED and pickup function…	Enumerationr/w Enumerated Values: 1 dial-standard 2 dial-dtmf 3 dial-keypad 4 extension-subscriber 5 extension-team 6 trunk-line 7 team-log 8 system-call-announce 9 system-call-announce-allow 10 system-call-exchange 11 system-call-exchange-allow 12 boss-boss 13 boss-secretary 14 boss-diversion 15 call-forwarding-cfu 16 call-forwarding-cfb 17 call-forwarding-cfnr 18 macro 19 headset 20 auto-accept 21 bundle 22 connection 23 system-parking 24 internal-line-access 25 hotel-room 26 agent-time 27 night-mode 28 hotel-room-connect 29 agent-time-renew 30 do-not-disturb 31 shift 32 parallel-ringing 33 nop 34 system-call-announce-team 35 msn-selection 50 xml-content 51 next-call-anonymous 52 menu-call-divert 53 menu-resource-dir 54 menu-internet-radio 55 toggle-call-divert 99 not-configured	.0.64.2.2.1.6
systemPhoneFKMSNPrio This variable contains the index of the selected MSN within the phone, for which this function shall be activated. Only used when selecting the systemPhoneFKType: team-log, call- forwarding-xxx or auto-accept. 1 .. 12: …	Integer32r/w Constraints: range: 0-12	.0.64.2.2.1.7
systemPhoneFKTargetIndex The variable contains either ExtensionIndex, GroupIndex, TrunkGroupIndex, TrunkBundleIndex or SystemNumberPosition, depending upon the function key type selected.	SystelTargetIndexr/w Type Constraints: range: 1..65535	.0.64.2.2.1.8
systemPhoneFKTargetString Variable contents depends upon the function key configured. It may be either a dialling number, a DTMF sequence, a keypad sequence, a call forwarding target number or a macro key sequence.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.64.2.2.1.9
systemPhoneFKAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.2.2.1.10

This table contains system phone capabilities which could be partially
specific to phone types (for example the availability of MSN).

systemPhoneCapabilityEntry row .0.64.3.1.1

Indexes

systemPhoneCapDeviceType

Column	Syntax	OID
systemPhoneCapDeviceType Subscripted via the device type of a system phone.	SystelDeviceType Type Values: 20 cs290 22 cs410 23 cs290u 24 cs410u 25 cs400 32 ips290 33 ips400 34 ips290plus 64 s530 65 s560 144 ost-40 145 ost-80 160 ip120 161 ip140 162 dect150 163 dect200-b 164 dect200-m 165 ip130 176 de310-ip-pro 177 de410-ip-pro 178 de700-ip-pro 179 de900-ip-pro 180 n510-ip-pro 181 n720-ip-pro 182 n720-dm-pro	.0.64.3.1.1.1
systemPhoneCapAvailableMSN Number of MSNs available in this device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.0.64.3.1.1.2
systemPhoneCapGeneral Capabilities of different system phone types. Feature is supported by the phone device type if the BIT is set to 1: do-not-disturb: DND - Modus available. hands-free: Hands free calling possible, cause a mic in s…	Bits Enumerated Values: 0 do-not-disturb 1 hands-free 2 local-phonebook 3 intercom 4 hotel 5 macrokey 6 boss-secretary 7 key-extension-module 8 ab-module 9 headset-auto-call 10 extended-status-led 11 conver-disp-settings 12 ng-do-not-disturb 13 extended-auto-pick-up 14 shift-key 15 parallel-ringing-key 16 headset-key 17 connection-key	.0.64.3.1.1.3
systemPhoneCapAvailableFunctionKeys Number of (2-level) function keys available on this device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.0.64.3.1.1.4
systemPhoneCapAvailableExtFunctionKeys Number of function keys available on the expansion module.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.0.64.3.1.1.5
systemPhoneCapMaxExtensionModules Maximum number of key expansion modules which can be connected to this device.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.0.64.3.1.1.6
systemPhoneCapAvailableLanguages A matrix of supported display languages by the phone device.	Bits Enumerated Values: 1 german 2 dutch 3 english 5 italian 6 danish 7 spanish 8 swedish 10 french 11 portuguese 14 czech 16 norwegian 17 greek 20 icelandic 21 polish 22 hungarian 23 russian 24 romanian 25 slovak	.0.64.3.1.1.7

This table contains information about firmware files stored on sd card
for system phone firmware update.

systemPhoneFwuFileEntry row .0.64.5.2.1

This entries only created by the respective device driver.

Indexes

systemPhoneFwuFileIndex

Column	Syntax	OID
systemPhoneFwuFileIndex A counting index for each firmware file stored on the mounted device.	Integer32r/w Constraints: range: 1-65535	.0.64.5.2.1.1
systemPhoneFwuFileType Variable contains the phone type of firmware file (stripped out of the header of the file).	SystelDeviceTyper/w Type Values: 20 cs290 22 cs410 23 cs290u 24 cs410u 25 cs400 32 ips290 33 ips400 34 ips290plus 64 s530 65 s560 144 ost-40 145 ost-80 160 ip120 161 ip140 162 dect150 163 dect200-b 164 dect200-m 165 ip130 176 de310-ip-pro 177 de410-ip-pro 178 de700-ip-pro 179 de900-ip-pro 180 n510-ip-pro 181 n720-ip-pro 182 n720-dm-pro	.0.64.5.2.1.2
systemPhoneFwuFileDirectory Specifies the complete path/tree where the firmware file can be found on the mounted device.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.64.5.2.1.3
systemPhoneFwuFileName Simply contains the firmware file name on the mounted device.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.0.64.5.2.1.4
systemPhoneFwuFileVersion Version information of the firmware file stored on sd card (stripped out of the header of file). Version string of elmeg system phones have a size of max. 9 characters. Siemens OpenStage devices have a maximum size of 1…	OctetStringr/w Constraints: range: 0-20	.0.64.5.2.1.5
systemPhoneFwuFileAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.5.2.1.6

This table contains information of firmware update of system phones.

systemPhoneFwuProcessEntry row .0.64.5.3.1

Indexes

systemPhoneFwuProcessIndex

Column	Syntax	OID
systemPhoneFwuProcessIndex A reference to the systemPhoneTable (or mpsTerminalTable).	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.5.3.1.1
systemPhoneFwuProcessStartNow This variable contains the user input in a boolean value to immediately update the firmware of this device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.64.5.3.1.2
systemPhoneFwuProcessStartSchedule If this variable is true, the firmwareupdate starts scheduled. The period of firmware updates is defined in systemPhoneFwuServerTable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.0.64.5.3.1.3
systemPhoneFwuProcessStatus Status of system phone firmware update: done: there is no firmware update in time running: firmwareupdate is actually running waiting: because lack of system ressources the scheduled or immediately started firmware up…	Enumeration Enumerated Values: 1 done 2 running 3 waiting	.0.64.5.3.1.4
systemPhoneFwuProcessResult Result of system phone firmware update: idle: initial value ok: firmware update is successfully completed failed: an error occurred during the firmware update process.	Enumeration Enumerated Values: 1 idle 2 ok 3 failed	.0.64.5.3.1.5
systemPhoneFwuProcessProgress Progress of system phone firmware update.	Integer32 Constraints: range: 0-100	.0.64.5.3.1.6
systemPhoneFwuProcessUnknownMsgCounter Statistic value which shows the received unknown messages of internal firmware download server during the firmware update.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.64.5.3.1.7
systemPhoneFwuProcessTimeoutCounter Statistic value which shows the occured timeouts during the firmware update.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.64.5.3.1.8
systemPhoneFwuProcessAdminStatus In case of elmegIP (gigaset) devices this variable activates (enable) or deactivates (disable) the automatic update function of gigaset devices (introduced by a SIP NOTIFY check-sync). Other systemphones ignore the Admi…	Enumerationr/w Enumerated Values: 1 enable 2 delete 3 disable	.0.64.5.3.1.9

This table contains general information about OEM system phones.

systemPhoneOemEntry row .0.64.6.1.1

Indexes

systemPhoneOemTerminalIndex

Column	Syntax	OID
systemPhoneOemTerminalIndex Reference to the mpsTerminalTable, a unique value for each OEM system phone.	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.6.1.1.1
systemPhoneOemDeviceType Specified type of OEM system phone.	SystelDeviceTyper/w Type Values: 20 cs290 22 cs410 23 cs290u 24 cs410u 25 cs400 32 ips290 33 ips400 34 ips290plus 64 s530 65 s560 144 ost-40 145 ost-80 160 ip120 161 ip140 162 dect150 163 dect200-b 164 dect200-m 165 ip130 176 de310-ip-pro 177 de410-ip-pro 178 de700-ip-pro 179 de900-ip-pro 180 n510-ip-pro 181 n720-ip-pro 182 n720-dm-pro	.0.64.6.1.1.2
systemPhoneOemAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.6.1.1.3

This table contains personal information about OEM system phones.
(It must be autosaved because the parameter can be changed by a
user).

systemPhoneOemUserEntry row .0.64.6.2.1

Indexes

systemPhoneOemUserIndex

Column	Syntax	OID
systemPhoneOemUserIndex Reference to the mpsTerminalTable, a unique value for each OEM system phone.	SystelTerminalIndexr/w Type Constraints: range: 1..65535	.0.64.6.2.1.1
systemPhoneOemUserLanguage The current display language of the phone device.	SystelLanguager/w Type Values: 1 german 2 dutch 3 english 5 italian 6 danish 7 spanish 8 swedish 10 french 11 portuguese 14 czech 16 norwegian 17 greek 20 icelandic 21 polish 22 hungarian 23 russian 24 romanian 25 slovak	.0.64.6.2.1.2
systemPhoneOemUserAdminStatus Just for MIB entry deletion.	Enumerationr/w Enumerated Values: 1 enable 2 delete	.0.64.6.2.1.3