FEC-BAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
34

bacPropertyTable

table
.0.60.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacPropertyTable' 
A list of configured bandwidth admission control property entries.
Typically one entry is created for each IP interface (WAN, LAN, WLAN)
and describes mainly the static bandwidth properties for this
interface.
A hierarchical relation can be achived, by defining a parent property
entry via bacPropertyParentIndex field.
bacPropertyEntry row .0.60.1.1.1
One entry in bacPropertyTable
Indexes
Column Syntax OID
bacPropertyIndex
The index in this property table.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.1.1.1
bacPropertyDescr
The description of the bandwidth property entry.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .0.60.1.1.1.2
bacPropertyParentIndex
The index of the parent BAC property. Is 0, if no parent defined.
Integer32r/w
Constraints:
range: 0-65535
 .0.60.1.1.1.3
bacPropertyDscpSignalling
The 6 bit DSCP value used in IP header for signalling data.
Integer32r/w
Constraints:
range: 0-63
 .0.60.1.1.1.4
bacPropertyDscpAudio
The 6 bit DSCP value used IP header for media data.
Integer32r/w
Constraints:
range: 0-63
 .0.60.1.1.1.5
bacPropertyBwConfigUp
The configured bandwidth for up direction.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.1.1.6
bacPropertyBwConfigDown
The configured bandwidth for down direction.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.1.1.7
bacPropertyAdminStatus
If the AdminStatus is set to enabled(1) this entry will be used,
if set to disabled(2) it won't be used. You may also
delete this entry by changing it to delete(3).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3delete
 .0.60.1.1.1.8

bacPropertyStatusTable

table
.0.60.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacPropertyStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacPropertyStatusTable' 
A list of bandwidth admission control property entries.
Typically one entry is created for each interface (WAN, LAN, WLAN)
and describes the dynamic properties of this interface. Each entry is
the dynamic part of the properties defined in bacPropertyTable and is
referenced by bacPropertyStatusIndex.
bacPropertyStatusEntry row .0.60.1.2.1
One entry in bacPropertyStatusTable.
Indexes
Column Syntax OID
bacPropertyStatusIndex
The index in this status table. This index is used to reference the
entry in bacPropertyTable where it is used as index as well.
Integer32
Constraints:
range: 1-65535
 .0.60.1.2.1.1
bacPropertyStatusBwReservedUp
The currently reserved bandwidth for up direction.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.2.1.2
bacPropertyStatusBwReservedDown
The currently reserved bandwidth for down direction.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.2.1.3
bacPropertyStatusBwInterfaceUp
The bandwidth of the corresponding interface for up direction.
0 if no interface available or no information about interface
available.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.2.1.4
bacPropertyStatusBwInterfaceDown
The bandwidth of the corresponding interface for down direction.
0 if no interface available or no information about interface
available.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.2.1.5

bacEntityRelationTable

table
.0.60.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacEntityRelationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacEntityRelationTable' 
A list of relation entries between BAC properties and voip entities.
The BAC properties are described as entries in bacPropertyTable.
Entities are referenced by type and index.
bacEntityRelationEntry row .0.60.1.3.1
One entry in bacEntityRelationTable.
Indexes
Column Syntax OID
bacEntityRelationIndex
The index in this entity relation table.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.3.1.1
bacEntityRelationPropertyIndex
Index of entry in bacPropertyTable to be referenced.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.3.1.2
bacEntityRelationEntityType
The type of entity.
provider(1) The entity is a provider
extension(2) The entity is an extension
Enumerationr/w
Enumerated Values:
1provider
2extension
 .0.60.1.3.1.3
bacEntityRelationEntityIndex
The index in corresponding entity table.
Depending on the used product different entities are addressed:
bacEntityRelationEntityType provider:
voipProviderTable or mpsTrunkGroupTable
bacEntityRelationEntityType exte…
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.3.1.4
bacEntityRelationAdminStatus
If the AdminStatus is set to enabled(1) this entry will be used,
if set to disabled(2) it won't be used. You may also
delete this entry by changing it to delete(3).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3delete
 .0.60.1.3.1.5

bacInterfaceRelationTable

table
.0.60.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacInterfaceRelationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacInterfaceRelationTable' 
A list of relation entries between BAC properties and interfaces.
The BAC properties are described as entries in bacPropertyTable.
Entities are referenced by ifIndex.
bacInterfaceRelationEntry row .0.60.1.4.1
One entry in bacInterfaceRelationTable.
Indexes
Column Syntax OID
bacInterfaceRelationIndex
The index in this interface relation table.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.4.1.1
bacInterfaceRelationPropertyIndex
Index of entry in bacPropertyTable to be referenced.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.4.1.2
bacInterfaceRelationIfIndex
Index of entry in ifTable to be referenced.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .0.60.1.4.1.3
bacInterfaceRelationAdminStatus
If AdminStatus is set to enabled(1) this entry will be used,
if set to disabled(2) it won't be used.
You may also delete this entry by changing it to delete(3).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3delete
 .0.60.1.4.1.4

bacAddressTable

table
.0.60.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacAddressTable' 
A list of IP address ranges or address names belonging to BAC
properties. The BAC properties are described as entries in
bacPropertyTable. The IP address ranges are defines by address and
netmask.
bacAddressEntry row .0.60.1.5.1
One entry in bacAddressTable.
Indexes
Column Syntax OID
bacAddressIndex
The index in this IP address table.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.5.1.1
bacAddressPropertyIndex
Index of entry in bacPropertyTable to be referenced.
Integer32r/w
Constraints:
range: 1-65535
 .0.60.1.5.1.2
bacAddressIpAddress
The address defining the IP address range.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .0.60.1.5.1.3
bacAddressIpNetmask
The netmask defining the IP address range.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .0.60.1.5.1.4
bacAddressDomain
The domain name defining the address. If empty bacAddressIpAddress
and bacAddressIpNetmask is used.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .0.60.1.5.1.5
bacAddressAdminStatus
If the AdminStatus is set to enabled(1) this entry will be used,
if set to disabled(2) it won't be used. You may also
delete this entry by changing it to delete(3).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3delete
 .0.60.1.5.1.6

bacAudioCodecPropertyTable

table
.0.60.1.6 · 1 row entry · 6 columns
Open in standard view
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk bacAudioCodecPropertyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FEC-BAC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FEC-BAC-MIB::bacAudioCodecPropertyTable' 
A list of audio codec property entries.
bacAudioCodecPropertyEntry row .0.60.1.6.1
One entry in bacAudioCodecPropertyTable.
Indexes
Column Syntax OID
bacAudioCodecPropertyIndex
The id of the codec and index in this property table.
Integer32
Constraints:
range: 1-32
 .0.60.1.6.1.1
bacAudioCodecPropertyDescr
The decription of this codec entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .0.60.1.6.1.2
bacAudioCodecPropertyBandwidth
The required bandwidth in bits per seconds.
bpsInteger32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.6.1.3
bacAudioCodecPropertyFrameDuration
The duration of one frame in microseconds.
microsecondsInteger32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.6.1.4
bacAudioCodecPropertyFrameSize
The size of one frame in bits.
bitsInteger32
Type Constraints:
range: -2147483648..2147483647
 .0.60.1.6.1.5
bacAudioCodecPropertyMosValue
The mean opinion score of this codec in hundredth. MOS specifies
a numerical indication of the perceived audio quality.
The following rating scheme exists:
1.00 Bad
2.00 Poor
3.00 Fair
4.00 Good
5.00 Excellent
Integer32
Constraints:
range: 100-500
 .0.60.1.6.1.6