FDRY-ACL-MIB Table View

Table of Ipv6 Access Control List filters

fdryIpv6AclEntry row .1.3.6.1.4.1.1991.1.2.16.1.1.1.1

An entry in the Ipv6 Access Control List filter table.

Indexes

fdryIpv6AclIndex

Column	Syntax	OID
fdryIpv6AclIndex The access control list item number for an entry. This is a unique number that identifies different Access list entries. This one has to be unique even though the name is not unique for a give access list with same or d…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.1
fdryIpv6AclName Access Control List name for an entry. This object is not writable on NI platforms.	OctetStringr/w Constraints: range: 0-199	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.2
fdryIpv6AclAction Action to take if the ip packet matches with this access control list.	Actionr/w Type Values: 0 deny 1 permit	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.3
fdryIpv6AclProtocol Transport protocols. 0 means any protocol.	IpProtocolr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.4
fdryIpv6AclSourceIp Source Ipv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.5
fdryIpv6AclSourcePrefixLen Source IPv6 address prefix length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.6
fdryIpv6AclSourceOperator Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number	Operatorr/w Type Values: 0 eq 1 neq 2 lt 3 gt 4 range 7 undefined	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.7
fdryIpv6AclSourceOperand1 For now this only refers to transport protocol port number.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.8
fdryIpv6AclSourceOperand2 For now this only refers to transport protocol port number.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.9
fdryIpv6AclDestinationIp Destination Ipv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.10
fdryIpv6AclDestinationPrefixLen Destination IPv6 address prefix length.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.11
fdryIpv6AclDestinationOperator Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number	Operatorr/w Type Values: 0 eq 1 neq 2 lt 3 gt 4 range 7 undefined	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.12
fdryIpv6AclDestinationOperand1 For now this only refers to transport protocol port number.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.13
fdryIpv6AclDestinationOperand2 For now this only refers to transport protocol port number.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.14
fdryIpv6AclEstablished Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.	RtrStatusr/w Type Values: 0 disabled 1 enabled	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.15
fdryIpv6AclLogOption Log flag, should be set to one to enable logging	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.16
fdryIpv6AclComments Remark description of individual Access Control List entry.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.17
fdryIpv6AclRowStatus To create or delete a access list entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.18
fdryIpv6AclVlanId Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned.	FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTCr/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.19
fdryIpv6AclClauseString Returns the equivalent filter clause string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.20

Table of Ipv6 Access Control List.  This table only supports
IPv6 ACLs with name length less than or equal to 110 characters
SNMP walk operation will skip the entries if the IPv6 ACL name is
greater than 110 characters.

brcdIpv6AccessListEntry row .1.3.6.1.4.1.1991.1.2.16.1.1.2.1

An entry in the Ipv6 Access Control List table.

Indexes

brcdIpv6AccessListName

Column	Syntax	OID
brcdIpv6AccessListName Name of the IPv6 Access Control List. From SNMP the length of the IPv6 ACL name is restricted to 110 characters although from CLI it can be 200 characters, due to SNMP restriction on sub OID length to be 128 for Index…	OctetString Constraints: range: 1-110	.1.3.6.1.4.1.1991.1.2.16.1.1.2.1.1
brcdIpv6AccessListNextIndex When read provides the encoded Index - combination of IPv6 ACL id and next available filter id - which can be used as index while creating access list filter entry in the fdryIpv6AclTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.16.1.1.2.1.2
brcdIpv6AccessListRowStatus To create or delete a Ipv6 access list entry. The supported values are createAndGo(4) to create an entry in this table and destroy(6) to delete an entry from this table. Value of active(1) will be always returned for…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.2.16.1.1.2.1.3