FD-SYSTEM-MIB Table View

Description.

sysLogEntry row .1.3.6.1.4.1.34592.1.3.1.2.16.2.1

Description.

Indexes

sysLogEntryIndex

Column	Syntax	OID
sysLogEntryIndex Description.	Enumeration Enumerated Values: 1 onuOnOffLine 2 onuDyingGaspAlarm 3 onuUniLoopBackAlarm 127 all	.1.3.6.1.4.1.34592.1.3.1.2.16.2.1.1
sysLogEntryEnable Description.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.34592.1.3.1.2.16.2.1.2

This table defines base para objects of PON cards installed in the chassis

ponCardEntry row .1.3.6.1.4.1.34592.1.3.1.5.2.1.1

Each entry defines a sole PON card objects

Indexes

ponCardSlotId

Column	Syntax	OID
ponCardSlotId PON card slot index, defined begin from 1 to max slot number	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.1
ponCardType PON card type value		.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.2
ponCardFactorySerial Description. PON card factory serial, reserved for future use	OctetString Constraints: range: 0-30	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.3
ponCardHwRev PON card hardware revision	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.4
ponCardFwVer PON card software version	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.5
ponCardRunningStatus pon card on-line status, each pon card may have following status: not installed (present) installed but can not be connected by main card installed and can be connected by main card	EPON-EOC-MIBDeviceStatus Type Values: 1 notPresent 2 offline 3 online 4 normal 5 abnormal	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.7
ponCardRuningTime The running time since the pon card last powered	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.8
ponCardOperate Operate action taken on PON card	EPON-EOC-MIBDeviceOperationr/w Type Values: 2 reset 3 default 4 saveConfig 5 restore 6 delete	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.9
ponCardUpgradeStat Description.	Enumeration Enumerated Values: 1 booting 2 normalRun 3 rcvFileIng 4 rcvFileOk 5 rcvFileErr 6 upgrading 7 upgradeOk 8 upgradeErr 9 upgradeOlt 10 upgradeOnu	.1.3.6.1.4.1.34592.1.3.1.5.2.1.1.10

MAC list table which contain the ONU MAC address list, these MAC address will
be used to authenticate accessed ONUs.

onuAuthMacCfgEntry row .1.3.6.1.4.1.34592.1.3.1.6.3.1

Each entry in this table defines a sole MAC (when the beginMAC is equal
to the endMAC or the endMAC is blank/zero) or a MAC range.

Indexes

authMacEntryId

Column	Syntax	OID
authMacEntryId Description. entry serial ID, which used to identify an entry uniquely	Unsigned32 Constraints: range: 1-65536	.1.3.6.1.4.1.34592.1.3.1.6.3.1.1
beginMacAddr begin MAC address, this object must be set to effect this entry	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.34592.1.3.1.6.3.1.2
endMacAddr End MAC address of a MAC range entry. Set this value to zero will result that this entry only indicate a unique MAC.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.34592.1.3.1.6.3.1.3
macAttr This object is used to decide that the MAC(s) introduced in this entry should be classified into blackList or whiteList. When set to 'obsolete', this entry is not in use. This option is reserved for futur…	Enumerationr/w Enumerated Values: 1 blackMac 2 whiteMac 3 obsolete	.1.3.6.1.4.1.34592.1.3.1.6.3.1.4
onuAuthMacRowStatus This object is used to create or delete a MAC entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.34592.1.3.1.6.3.1.5

This table contain illegal ONU MAC list which try to register
on OLT

nonAuthOnuListEntry row .1.3.6.1.4.1.34592.1.3.1.6.4.1

Each entry in this table contain a nonAuth onu MAC info

Indexes

oltId nonAuthOnuMacIndex

Column	Syntax	OID
nonAuthOnuMacIndex Administrativly assigned entry index	Unsigned32 Constraints: range: 1-65536	.1.3.6.1.4.1.34592.1.3.1.6.4.1.1
nonAuthOnuMac The MAC address which tried to register	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.34592.1.3.1.6.4.1.2
nonAuthOnuTries The times that the illegal ONU try to register	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.34592.1.3.1.6.4.1.3
oltId Description.	Integer32 Constraints: range: 1-48	.1.3.6.1.4.1.34592.1.3.1.6.4.1.4

Description.

onuAuthBlacklistMacCfgEntry row .1.3.6.1.4.1.34592.1.3.1.6.6.1

Description.

Indexes

oltId authBlacklistMacEntryId

Column	Syntax	OID
authBlacklistMacEntryId index of ONU mac in blacklist.	Unsigned32 Constraints: range: 1-256	.1.3.6.1.4.1.34592.1.3.1.6.6.1.1
onuAuthBlacklistMacAddr ONU mac in blacklist.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.34592.1.3.1.6.6.1.2
onuAuthBlacklistMacCfgRowStatus This object is used to create or delete a blacklist MAC entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.34592.1.3.1.6.6.1.3

Description.

onuAuthWhitelistMacCfgEntry row .1.3.6.1.4.1.34592.1.3.1.6.7.1

Description.

Indexes

oltId authWhitelistMacEntryId

Column	Syntax	OID
authWhitelistMacEntryId index of ONU mac in whitelist.	Unsigned32 Constraints: range: 1-1024	.1.3.6.1.4.1.34592.1.3.1.6.7.1.1
onuAuthWhitelistMacAddr ONU mac in whitelist.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.34592.1.3.1.6.7.1.2
onuAuthWhitelistMacCfgRowStatus This object is used to create or delete a whitelist MAC entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.34592.1.3.1.6.7.1.3

Description.

onuAuthLoidCfgEntry row .1.3.6.1.4.1.34592.1.3.1.6.8.1

Description.

Indexes

authLoidEntryId

Column	Syntax	OID
authLoidEntryId index of ONU loid in table.	Unsigned32 Constraints: range: 1-512	.1.3.6.1.4.1.34592.1.3.1.6.8.1.1
onuAuthLoidStrings CTC loid, max 24 Chars.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.34592.1.3.1.6.8.1.2
onuAuthPasswordStrings CTC loid password, max 12 Chars	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.34592.1.3.1.6.8.1.3
onuAuthLoidCfgRowStatus This object is used to create or delete a loid entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.34592.1.3.1.6.8.1.4

Description. Access user management table. The table defined
the users who can access the system shell management interface,
including local CLI and remote telnet access.
          
The users defined in this table is independent with those
defined in EMS.

userManageEntry row .1.3.6.1.4.1.34592.1.3.1.7.1.1

Description. One entry contains one user attributes, up to 5
entries can be created in this table.

Indexes

userId

Column	Syntax	OID
userId Administrativly assigned entry index	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.34592.1.3.1.7.1.1.1
userName user name	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.34592.1.3.1.7.1.1.2
userPassword user password	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.34592.1.3.1.7.1.1.3
userPermission Description. This object define the user priority and other permission attributes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.34592.1.3.1.7.1.1.4
userAccessDeviceMap This object is defined for future use. It is a bit map value which defines which devices in the system can be accessed by a user. Temporary definitions: ---------------------------------…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.34592.1.3.1.7.1.1.5
loginTimeout Description. Time out time since one accessed user last operation, when this time elapse, the user will be kicked off	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.34592.1.3.1.7.1.1.6
userEntryRowStatus Use this object to create or delete a user info	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.34592.1.3.1.7.1.1.7