F3-PBB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
6
Rows
6
Columns
24
.1.3.6.1.4.1.2544.1.12.21.1.1 · 1 row entry · 4 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbEthernetAccPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbEthernetAccPortTable'
A list of entries corresponding to PBB function on the net port
f3PbbEthernetAccPortEntry row .1.3.6.1.4.1.2544.1.12.21.1.1.1
A conceptual row in the f3PbbEthernetAccPortTable.
Indexes
No indexes recorded
Column Syntax OID
This object allows to specify which itag loopback has been enabled.
1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2544.1.12.21.1.1.1.1
This object allows specification of the Itag 1 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.1.1.2
This object allows specification of the Itag 2 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.1.1.3
This object allows specification of the Itag 3 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetAccPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.1.1.4
.1.3.6.1.4.1.2544.1.12.21.1.2 · 1 row entry · 5 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbEthernetNetPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbEthernetNetPortTable'
A list of entries corresponding to PBB function on the net port
f3PbbEthernetNetPortEntry row .1.3.6.1.4.1.2544.1.12.21.1.2.1
A conceptual row in the f3PbbEthernetNetPortTable.
Indexes
No indexes recorded
Column Syntax OID
This object is mac address of backbone network port.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2544.1.12.21.1.2.1.1
This object allows to specify which itag loopback has been enabled.
1: Itag 1 loopback enabled, 2: Itag 2 loopback enabled, 4: Itag 4 loopback enabled.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2544.1.12.21.1.2.1.2
This object allows specification of the Itag 1 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.2.1.3
This object allows specification of the Itag 2 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.2.1.4
This object allows specification of the Itag 3 to be looped back when port is in
vlan(terminal/facility) loopback configuration. This is valid only if the
corresponding bit in f3PbbEthernetNetPortITagLoopbackMask is set…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.2544.1.12.21.1.2.1.5
.1.3.6.1.4.1.2544.1.12.21.1.3 · 1 row entry · 6 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbFlowTable'
A list of entries corresponding to PBB function on the flow
f3PbbFlowEntry row .1.3.6.1.4.1.2544.1.12.21.1.3.1
A conceptual row in the f3PbbFlowTable.
Indexes
No indexes recorded
Column Syntax OID
This object allows specification of the tag management
operation on the I-TAG. Supported types are 'none', 'push', and 'pushisid'.
and it must be none while ctagcontrol or stagcontrol is not none.
CM-FACILITY-MIBFlowTagControlr/w
Type Values:
1none
2push
3swapvid
4pushvid
5pop
6pushisid
.1.3.6.1.4.1.2544.1.12.21.1.3.1.1
This object is used to specify the ITagISID. Its rang from 256 to 16777214.
Integer32r/w
Constraints:
range: 256-16777214
.1.3.6.1.4.1.2544.1.12.21.1.3.1.2
This object is used to specify the priority of ITag. Its rang from 0 to 7.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.2544.1.12.21.1.3.1.3
This object indicates whether can assign BMAC value.
When enabled, user can assign a unicast BMAC as B_DA for this EVC
When disabled, 01-1E-83-<I-SID> will be used as B-DA.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.21.1.3.1.4
Customer can configure the backbone MAC destination address, the
default value is 01-1E-83-<I-SID>.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2544.1.12.21.1.3.1.5
When it is false, Drop PBB frames in the A2N direction (FPGA function),
Allow to PUSH I-TAG on this flow;
When A2NPbbCapableFlag is TRUE,
Pass PBB frames in the A2N direction (FPGA function), Software allow PUSH I-TAG o…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.21.1.3.1.6
.1.3.6.1.4.1.2544.1.12.21.1.4 · 1 row entry · 5 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbIpManagementTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbIpManagementTunnelTable'
A list of entries corresponding to PBB function on the mngt tunnel
f3PbbIpManagementTunnelEntry row .1.3.6.1.4.1.2544.1.12.21.1.4.1
A conceptual row in the f3PbbIpManagementTunnelTable.
Indexes
No indexes recorded
Column Syntax OID
This object ITAG whether enabled, It is Enabled only When management tunnel type is ISID based.
By default it is disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.21.1.4.1.1
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG).
Integer32r/w
Constraints:
range: 256-16777214
.1.3.6.1.4.1.2544.1.12.21.1.4.1.2
Only applicable when iTagEnabled = enabled (ISID is shown to user, but in IFM data type here is ITAG, no use at present).
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.2544.1.12.21.1.4.1.3
When enabled, we will use provisioned B-MAC for ARP and for management packets.
When disabled, we will use backbone group MAC address for ARP and get B-DA from ARP response
By default, it is disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.21.1.4.1.4
User must set a valid MAC address, Only applicable when iTagEnabled = enabled
By default, it is 00:00:00:00:00:00
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2544.1.12.21.1.4.1.5
.1.3.6.1.4.1.2544.1.12.21.2.1 · 1 row entry · 2 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbEthernetNetPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbEthernetNetPortStatsTable'
A collection of pbb Ethernet Network Port related statistics.  
These reflect the current data.
f3PbbEthernetNetPortStatsEntry row .1.3.6.1.4.1.2544.1.12.21.2.1.1
A conceptual row in the f3PbbEthernetNetPortStatsTable.
Entries exist in this table for each Ethernet interface/port.
Indexes
No indexes recorded
Column Syntax OID
Number of PBB frames (BDA is not backbone group MAC)
discarded due to receive BDA which is not matching the
port's PBB MAC address when port is non-promiscuous mode.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.21.2.1.1.1
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID
in backbone group MAC in the B-DA when port is non-promiscuous mode.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.21.2.1.1.2
.1.3.6.1.4.1.2544.1.12.21.2.2 · 1 row entry · 2 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3PbbEthernetNetPortHistoryStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-PBB-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-PBB-MIB::f3PbbEthernetNetPortHistoryStatsTable'
A collection of pbb Ethernet Network Port related statistics.  
These reflect the current data.
f3PbbEthernetNetPortHistoryStatsEntry row .1.3.6.1.4.1.2544.1.12.21.2.2.1
A conceptual row in the f3PbbEthernetNetPortHistoryStatsTable.
Entries exist in this table for each Ethernet interface/port.
Indexes
No indexes recorded
Column Syntax OID
Number of PBB frames (BDA is not backbone group MAC)
discarded due to receive BDA which is not matching the
port's PBB MAC address when port is non-promiscuous mode.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.21.2.2.1.1
Number of PBB frames discarded due to mismatch of I-SID in I-TAG and I-SID
in backbone group MAC in the B-DA when port is non-promiscuous mode.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.21.2.2.1.2