F3-OSPF-MIB Table View

A list of entries corresponding to OSPF Router 
instance for configuration purposes.

f3OspfRouterEntry row .1.3.6.1.4.1.2544.1.12.35.1.1.1

A conceptual row in the f3OspfRouterTable.

Indexes

f3OspfRouterIndex

Column	Syntax	OID
f3OspfRouterIndex A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.	OSPF-MIBRouterID	.1.3.6.1.4.1.2544.1.12.35.1.1.1.1
f3OspfRouterMetricType The metric type can be specified to define how the cost of redistributed routes are to be calculated. This attribute must be set to zero if f3OspfRouterMetric has been specified.	OspfMetricTyper/w Type Values: 1 e1 2 e2	.1.3.6.1.4.1.2544.1.12.35.1.1.1.2
f3OspfRouterMetric The metric value to use as the default cost to be associated with any redistributed routes. This attribute must be set to zero if the f3OspfRouterMetricType has been specified	Integer32r/w Constraints: range: 0-16777214	.1.3.6.1.4.1.2544.1.12.35.1.1.1.3
f3OspfRouterRedistributionType The redistribution type is used to enable redistribution of routes of a specified protocol.	OspfRedistributionTyper/w Type Values: 1 none 2 rip	.1.3.6.1.4.1.2544.1.12.35.1.1.1.4
f3OspfRouterNumAttachedAreas Number of attached areas for the OSPF Router.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.35.1.1.1.5
f3OspfRouterAreaBdrRtrStatus A flag to note whether this router is an Area Border Router.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.35.1.1.1.6
f3OspfRouterStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.35.1.1.1.7
f3OspfRouterRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.35.1.1.1.8

A list of entries corresponding to OSPF Area
configuration purposes.

f3OspfAreaEntry row .1.3.6.1.4.1.2544.1.12.35.1.2.1

A conceptual row in the f3OspfAreaTable.

Indexes

f3OspfAreaId

Column	Syntax	OID
f3OspfAreaId A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaID	.1.3.6.1.4.1.2544.1.12.35.1.2.1.1
f3OspfAreaType The type of an area.	OspfAreaTyper/w Type Values: 1 normal 2 stub	.1.3.6.1.4.1.2544.1.12.35.1.2.1.2
f3OspfAreaAuthType The authentication type specifies whether no authentication, simple authentication, or MD5 authentication is required for this area. Keying information must be configured on a per-interface basis. This only applies …	OSPF-MIBOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.2544.1.12.35.1.2.1.3
f3OspfAreaDefaultCost The default cost for summary LSA's announced to stubby areas. This only applies to stubby areas.	Unsigned32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2544.1.12.35.1.2.1.4
f3OspfAreaSpfRuns A count of the number of times the Shortest Path algorithm has been run for this area.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.35.1.2.1.5
f3OspfAreaLsaCount The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.35.1.2.1.6
f3OspfAreaStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.35.1.2.1.7
f3OspfAreaRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.35.1.2.1.8

A list of entries corresponding to OSPF Interface
configuration purposes. This table extends cmIpInterfaceTable 
from CM-IP-MIB.

f3OspfIpInterfaceExtEntry row .1.3.6.1.4.1.2544.1.12.35.1.3.1

A conceptual row in the f3OspfIpInterfaceExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3OspfIpInterfaceExtStatus The OSPF admin status for the IP Interface.	OspfStater/w Type Values: 1 enabled 2 disabled 3 passive	.1.3.6.1.4.1.2544.1.12.35.1.3.1.1
f3OspfIpInterfaceExtAreaId The Area ID with which this IP Interface is associated.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.2544.1.12.35.1.3.1.2
f3OspfIpInterfaceExtIfType The OSPF interface type for the IP Interface.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.2544.1.12.35.1.3.1.3
f3OspfIpInterfaceExtHelloInterval The number of seconds between OSPF Hello packets for the IP Interface.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.2544.1.12.35.1.3.1.4
f3OspfIpInterfaceExtRtrDeadInterval The number of seconds that must pass from the last received Hello packet before a neighbor router is declared down.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.3.1.5
f3OspfIpInterfaceExtRetransInterval The number of seconds for the Retransmit Timer Interval value for the IP Interface. The value is used when retransmitting Database Description and Link State Request packets.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.3.1.6
f3OspfIpInterfaceExtRtrPriority The OSPF router priority for the IP Interface. The router with the highest priority will be more eligible to become Designated Router. Setting the value to 0 makes the router ineligible to become the Designated Router.	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.12.35.1.3.1.7
f3OspfIpInterfaceExtCost The cost associated with the IP Interface for use in the Shortest Path calculations.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.3.1.8
f3OspfIpInterfaceExtAuthType The OSPF authentication type for the IP Interface. This value supersedes the authentication type defined for the Area.	OSPF-MIBOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.2544.1.12.35.1.3.1.9
f3OspfIpInterfaceExtAuthKey The OSPF authentication key for the IP Interface. If the authentication type is Simple, the authentication key is limited to 8 characters. If the authentication type is MD5, the authentication key is up to 16 charac…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.35.1.3.1.10

A list of entries corresponding to OSPF Interface
configuration purposes. This table extends ipManagementTunnelTable 
from CM-IP-MIB.

f3OspfIpMgmtTunnelExtEntry row .1.3.6.1.4.1.2544.1.12.35.1.4.1

A conceptual row in the f3OspfIpMgmtTunnelExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3OspfIpMgmtTunnelExtStatus The OSPF admin status for the IP Management Tunnel.	OspfStater/w Type Values: 1 enabled 2 disabled 3 passive	.1.3.6.1.4.1.2544.1.12.35.1.4.1.1
f3OspfIpMgmtTunnelExtAreaId The Area ID with which this IP Management Tunnel is associated.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.2544.1.12.35.1.4.1.2
f3OspfIpMgmtTunnelExtIfType The OSPF interface type for the IP Management Tunnel.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.2544.1.12.35.1.4.1.3
f3OspfIpMgmtTunnelExtHelloInterval The number of seconds between OSPF Hello packets for the IP Management Tunnel.	secondsOSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.2544.1.12.35.1.4.1.4
f3OspfIpMgmtTunnelExtRtrDeadInterval The number of seconds that must pass from the last received Hello packet before a neighbor router is declared down.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.4.1.5
f3OspfIpMgmtTunnelExtRetransInterval The number of seconds for the Retransmit Timer Interval value for the IP Interface. The value is used when retransmitting Database Description and Link State Request packets.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.4.1.6
f3OspfIpMgmtTunnelExtRtrPriority The OSPF router priority for the IP Management Tunnel. The router with the highest priority will be more eligible to become Designated Router. Setting the value to 0 makes the router ineligible to become the Designate…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2544.1.12.35.1.4.1.7
f3OspfIpMgmtTunnelExtCost The cost associated with the IP Management Tunnel for use in the Shortest Path calculations.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.35.1.4.1.8
f3OspfIpMgmtTunnelExtAuthType The OSPF authentication type for the IP Management Tunnel. This value supersedes the authentication type defined for the Area.	OSPF-MIBOspfAuthenticationTyper/w Type Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.2544.1.12.35.1.4.1.9
f3OspfIpMgmtTunnelExtAuthKey The OSPF authentication key for the IP Management Tunnel. If the authentication type is Simple, the authentication key is limited to 8 characters. If the authentication type is MD5, the authentication key is up to 1…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.35.1.4.1.10

This table extends ospfNbrTable from OSPF-MIB.

f3OspfNbrExtEntry row .1.3.6.1.4.1.2544.1.12.35.1.5.1

A conceptual row in the f3OspfNbrExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3OspfNbrExtRole The OSPF role for this neighbor router.	OspfRole Type Values: 1 bdr 2 dr 3 drother	.1.3.6.1.4.1.2544.1.12.35.1.5.1.1