F3-OSPF-MIB

        This module defines the OSPF MIB definitions 
used by the F3 (FSP150CM/CC) product lines.  
Copyright (C) ADVA Optical Networking.
    
Source file
F3-OSPF-MIB
Last revised
Identity
f3OspfMIB
Base OID
1.3.6.1.4.1.2544.1.12.35
Imported Objects
ADVA-MIB fsp150cm
CM-IP-MIB cmIpInterfaceEntry ipManagementTunnelEntry
OSPF-MIB AreaID DesignatedRouterPriority HelloRange OspfAuthenticationType ospfNbrEntry RouterID
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the adva MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'F3-OSPF-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'F3-OSPF-MIB::f3OspfMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-OSPF-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-OSPF-MIB::f3OspfMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (52)
.1.3.6.1.4.1.2544.1.12.35
.1.3.6.1.4.1.2544.1.12.35.1
.1.3.6.1.4.1.2544.1.12.35.1.1
.1.3.6.1.4.1.2544.1.12.35.1.1.1
.1.3.6.1.4.1.2544.1.12.35.1.1.1.1
.1.3.6.1.4.1.2544.1.12.35.1.1.1.2
Integer32
.1.3.6.1.4.1.2544.1.12.35.1.1.1.3
.1.3.6.1.4.1.2544.1.12.35.1.1.1.4
.1.3.6.1.4.1.2544.1.12.35.1.1.1.5
.1.3.6.1.4.1.2544.1.12.35.1.1.1.6
.1.3.6.1.4.1.2544.1.12.35.1.1.1.7
.1.3.6.1.4.1.2544.1.12.35.1.1.1.8
.1.3.6.1.4.1.2544.1.12.35.1.2
.1.3.6.1.4.1.2544.1.12.35.1.2.1
.1.3.6.1.4.1.2544.1.12.35.1.2.1.1
.1.3.6.1.4.1.2544.1.12.35.1.2.1.2
.1.3.6.1.4.1.2544.1.12.35.1.2.1.3
Unsigned32
.1.3.6.1.4.1.2544.1.12.35.1.2.1.4
.1.3.6.1.4.1.2544.1.12.35.1.2.1.5
.1.3.6.1.4.1.2544.1.12.35.1.2.1.6
.1.3.6.1.4.1.2544.1.12.35.1.2.1.7
.1.3.6.1.4.1.2544.1.12.35.1.2.1.8
.1.3.6.1.4.1.2544.1.12.35.1.3
.1.3.6.1.4.1.2544.1.12.35.1.3.1
.1.3.6.1.4.1.2544.1.12.35.1.3.1.1
OctetString
.1.3.6.1.4.1.2544.1.12.35.1.3.1.10
.1.3.6.1.4.1.2544.1.12.35.1.3.1.2
Enumeration
.1.3.6.1.4.1.2544.1.12.35.1.3.1.3
.1.3.6.1.4.1.2544.1.12.35.1.3.1.4
secondsInteger32
.1.3.6.1.4.1.2544.1.12.35.1.3.1.5
secondsInteger32
.1.3.6.1.4.1.2544.1.12.35.1.3.1.6
.1.3.6.1.4.1.2544.1.12.35.1.3.1.7
Integer32
.1.3.6.1.4.1.2544.1.12.35.1.3.1.8
.1.3.6.1.4.1.2544.1.12.35.1.3.1.9
.1.3.6.1.4.1.2544.1.12.35.1.4
.1.3.6.1.4.1.2544.1.12.35.1.4.1
.1.3.6.1.4.1.2544.1.12.35.1.4.1.1
OctetString
.1.3.6.1.4.1.2544.1.12.35.1.4.1.10
.1.3.6.1.4.1.2544.1.12.35.1.4.1.2
Enumeration
.1.3.6.1.4.1.2544.1.12.35.1.4.1.3
.1.3.6.1.4.1.2544.1.12.35.1.4.1.4
secondsInteger32
.1.3.6.1.4.1.2544.1.12.35.1.4.1.5
secondsInteger32
.1.3.6.1.4.1.2544.1.12.35.1.4.1.6
.1.3.6.1.4.1.2544.1.12.35.1.4.1.7
Integer32
.1.3.6.1.4.1.2544.1.12.35.1.4.1.8
.1.3.6.1.4.1.2544.1.12.35.1.4.1.9
.1.3.6.1.4.1.2544.1.12.35.1.5
.1.3.6.1.4.1.2544.1.12.35.1.5.1
.1.3.6.1.4.1.2544.1.12.35.1.5.1.1
.1.3.6.1.4.1.2544.1.12.35.2
.1.3.6.1.4.1.2544.1.12.35.2.1
.1.3.6.1.4.1.2544.1.12.35.2.2
Dependencies (15) 6 direct · 9 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (5)
Enumeration
normal(1)
stub(2)
Enumeration
e1(1)
e2(2)
Enumeration
none(1)
rip(2)
Enumeration
bdr(1)
dr(2)
drother(3)
Enumeration
enabled(1)
disabled(2)
passive(3)
Conformance Groups (5)
A collection of objects used to manage the OSPF Router.
.1.3.6.1.4.1.2544.1.12.35.2.2.1
A collection of objects used to manage the OSPF Area.
.1.3.6.1.4.1.2544.1.12.35.2.2.2
A collection of objects used to manage OSPF configuration
of IP Interface.
.1.3.6.1.4.1.2544.1.12.35.2.2.3
A collection of objects used to manage OSPF configuration
of IP Management Tunnel.
.1.3.6.1.4.1.2544.1.12.35.2.2.4
A collection of objects used to manage OSPF configuration
of OSPF Neighbor.
.1.3.6.1.4.1.2544.1.12.35.2.2.5
Compliance Statements (1)

OID .1.3.6.1.4.1.2544.1.12.35.2.1.1
Describes the requirements for conformance to the F3-OSPF-MIB compilance.
Required groups