F3-FPM-MIB Table View

A list of entries corresponding to Access Flow Point
for configuration purposes.

f3AccFlowPointEntry row .1.3.6.1.4.1.2544.1.12.43.1.1.1

A conceptual row in the f3AccFlowPointTable.
These entries represent an Access Flow Point.
If the Flow Point attached to a lag, the slotIndex should
be 255 (255 is used to identify the Flow Point belongs to lag),
and …

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetAccPortIndex f3AccFlowPointIndex

Column	Syntax	OID
f3AccFlowPointIndex The integer index value corresponding to an Flow Point.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.43.1.1.1.1
f3AccFlowPointAlias This object allows SNMP management entities to provide a circuit identifier with the Flow Point.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.12.43.1.1.1.2
f3AccFlowPointAdminState This object represents the Administrative State of the Flow Point.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.1.1.3
f3AccFlowPointOperationalState This object represents the Operational State of the Flow Point.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.1.1.4
f3AccFlowPointSecondaryState This object represents the Secondary State of the Flow Point.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.1.1.5
f3AccFlowPointAssociatedFlowId This object provides the association of an Flow with an Flow Point.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.6
f3AccFlowPointIngressMultiCOSEnabled This object allows specification of ingress multiple COS (Class of Service) Flow Point.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.7
f3AccFlowPointIngressCOSdeprecated This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Prio…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.1.1.8
f3AccFlowPointEgressShapingType This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.	CM-FACILITY-MIBShapingTyper/w Type Values: 1 port-based 2 flow-based 3 llq	.1.3.6.1.4.1.2544.1.12.43.1.1.1.9
f3AccFlowPointIngressVlanMemberList It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all p…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2544.1.12.43.1.1.1.10
f3AccFlowPointVlanMemberAction This object allows to add or remove the VLAN members specified by f3AccFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3AccFlowPointVlanMemberAc…	CM-FACILITY-MIBFlowVlanActionTyper/w Type Values: 1 no-action 2 add-vlan 3 remove-vlan	.1.3.6.1.4.1.2544.1.12.43.1.1.1.11
f3AccFlowPointVlanMemberActionVlan This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.43.1.1.1.12
f3AccFlowPointIngressUntaggedFrameEnabled This object allows to specify whether or not the Flow Point supports untagged frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.13
f3AccFlowPointCTagControl This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointCTagVlanId) and …	CM-FACILITY-MIBFlowTagControlr/w Type Values: 1 none 2 push 3 swapvid 4 pushvid 5 pop 6 pushisid	.1.3.6.1.4.1.2544.1.12.43.1.1.1.14
f3AccFlowPointCTagVlanId This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.43.1.1.1.15
f3AccFlowPointCTagVlanPriority This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.43.1.1.1.16
f3AccFlowPointSTagControl This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3AccFlowPointSTagVlanId) and…	CM-FACILITY-MIBFlowTagControlr/w Type Values: 1 none 2 push 3 swapvid 4 pushvid 5 pop 6 pushisid	.1.3.6.1.4.1.2544.1.12.43.1.1.1.17
f3AccFlowPointSTagVlanId This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.43.1.1.1.18
f3AccFlowPointSTagVlanPriority This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3AccFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.43.1.1.1.19
f3AccFlowPointEgressOuterTagPrioMapEnabled This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified CO…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.20
f3AccFlowPointEgressInnerTagPrioMapEnabled This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.21
f3AccFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA fu…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.12.43.1.1.1.22
f3AccFlowPointDefaultMemberEnabled Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.23
f3AccFlowPointMcastRateLimitEnabled Whether multicast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.24
f3AccFlowPointMcastRateLimitSpeedLo The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.25
f3AccFlowPointMcastRateLimitSpeedHi The rate limiting for multicast packets per FP. When f3AccFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.26
f3AccFlowPointBcastRateLimitEnabled Whether broadcast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.27
f3AccFlowPointBcastRateLimitSpeedLo The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.28
f3AccFlowPointBcastRateLimitSpeedHi The rate limiting for broadcast packets per FP. When f3AccFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.29
f3AccFlowPointCombinedRateLimitEnabled Whether broadcast and multicast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.30
f3AccFlowPointCombinedRateLimitSpeedLo The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.31
f3AccFlowPointCombinedRateLimitSpeedHi The rate limiting for broadcast and multicast packets per FP. When f3AccFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.32
f3AccFlowPointSplitHorizonGroupOID Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.33
f3AccFlowPointLoopAvoidance EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.34
f3AccFlowPointHierarchicalCOSEnabled Enable or Disable Hierarchical COS shaping (flow shaping).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.35
f3AccFlowPointMaximumBWLo This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.36
f3AccFlowPointMaximumBWHi This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.37
f3AccFlowPointGuaranteedBWLo This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.38
f3AccFlowPointGuaranteedBWHi This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.1.1.39
f3AccFlowPointAutoBandwidthConfigEnabled This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.40
f3AccFlowPointAutoCIRPercentage This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3AccFlowPointAutoBandwidthConfigEnabled is TRUE.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.12.43.1.1.1.41
f3AccFlowPointFrameFwdEnabled When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.42
f3AccFlowPointStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.1.1.43
f3AccFlowPointRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.1.1.44
f3AccFlowPointUsePortPrioMapProfile This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.45
f3AccFlowPointRefPrioMapProfile This object allows to set priority map profile.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.46
f3AccFlowpointRefConnectGuardFlowObject This object specifies Mac Sec flow object OID.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.47
f3AccFlowpointSecureBlockingControl This object can be used to enable/disable secure block.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.1.1.48
f3AccFlowpointSecureState This object specifies the secure state of this flow.	CM-COMMON-MIBFlowSecState Type Values: 1 secureNormal 2 secureBlocked 3 unsecureNormal 4 unsecureBlocked	.1.3.6.1.4.1.2544.1.12.43.1.1.1.49

A list of entries corresponding to Access Flow Point 
Quality of Service Shaper for configuration purposes.

f3AccFpQosShaperEntry row .1.3.6.1.4.1.2544.1.12.43.1.2.1

A conceptual row in the f3AccFpQosShaperTable.
These entries represent an Access Flow Point Quality
of Service Shaper.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetAccPortIndex f3AccFlowPointIndex f3AccFpQosShaperIndex

Column	Syntax	OID
f3AccFpQosShaperIndex The unique integer index value corresponding to a Quality of Service Shaper.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2544.1.12.43.1.2.1.1
f3AccFpQosShaperAdminState This object represents the Administrative State of a Shaper.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.2.1.2
f3AccFpQosShaperOperationalState This object represents the Operational State of a Shaper.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.2.1.3
f3AccFpQosShaperSecondaryState This object represents the Secondary State of the Shaper.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.2.1.4
f3AccFpQosShaperCIRLo This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.5
f3AccFpQosShaperCIRHi This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.6
f3AccFpQosShaperEIRLo This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.7
f3AccFpQosShaperEIRHi This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.8
f3AccFpQosShaperCBS This object represents the Commited Burst Size (CBS) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.9
f3AccFpQosShaperEBS This object represents the Excess Burst Size (EBS) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.10
f3AccFpQosShaperBufferSize This object represents the Buffer Size of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.2.1.11
f3AccFpQosShaperCOS This object provides the COS (Class of Service) value for the QOS Shaper.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2544.1.12.43.1.2.1.12
f3AccFpQosShaperStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.2.1.13
f3AccFpQosShaperRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.2.1.14

A list of entries corresponding to Access Flow Point
Quality of Service Policer for configuration purposes.

f3AccFpQosPolicerEntry row .1.3.6.1.4.1.2544.1.12.43.1.3.1

A conceptual row in the f3AccFpQosPolicerTable.
These entries represent an Access Flow Point Quality
of Service Policer.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetAccPortIndex f3AccFlowPointIndex f3AccFpQosPolicerIndex

Column	Syntax	OID
f3AccFpQosPolicerIndex The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represen…	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2544.1.12.43.1.3.1.1
f3AccFpQosPolicerAdminState This object represents the Administrative State of a Policer.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.3.1.2
f3AccFpQosPolicerOperationalState This object represents the Operational State of a Policer.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.3.1.3
f3AccFpQosPolicerSecondaryState This object represents the Secondary State of a Policer.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.3.1.4
f3AccFpQosPolicerCIRLo This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.3.1.5
f3AccFpQosPolicerCIRHi This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.3.1.6
f3AccFpQosPolicerEIRLo This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.3.1.7
f3AccFpQosPolicerEIRHi This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.3.1.8
f3AccFpQosPolicerCBS This object represents the Commited Burst Size (CBS) of a Policer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.3.1.9
f3AccFpQosPolicerEBS This object represents the Excess Burst Size (EBS) of a Policer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.3.1.10
f3AccFpQosPolicerAlgorithm This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).	CM-FACILITY-MIBPolicerAlgorithmType Type Values: 1 srTCM 2 trTCM	.1.3.6.1.4.1.2544.1.12.43.1.3.1.11
f3AccFpQosPolicerColorMode This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.	CM-FACILITY-MIBPolicerColorModer/w Type Values: 1 color-aware 2 color-blind	.1.3.6.1.4.1.2544.1.12.43.1.3.1.12
f3AccFpQosPolicerCouplingFlag This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.3.1.13
f3AccFpQosPolicerPolicingEnabled This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.3.1.14
f3AccFpQosPolicerStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.3.1.15
f3AccFpQosPolicerRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.3.1.16

This table extends cmMPFlowTable to provide configuration of maximum
forwarding table size.

f3MPFlowExtEntry row .1.3.6.1.4.1.2544.1.12.43.1.4.1

A conceptual row in the f3MPFlowExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3MPFlowExtMaxFwdEntries This object allows configuring the maximum number of Forwarding Entires for Forwarding Table of this MP Flow.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.4.1.1
f3MPFlowRefConnectGuardFlowObject This object specifies Mac Sec flow object OID.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.4.1.2
f3MPFlowSecureState This object specifies the secure state of the macsec flow.	CM-COMMON-MIBFlowSecState Type Values: 1 secureNormal 2 secureBlocked 3 unsecureNormal 4 unsecureBlocked	.1.3.6.1.4.1.2544.1.12.43.1.4.1.3

A list of entries corresponding to Access Flow Point
Control Protocol Disposition V2.

f3AccFlowPointCpdV2Entry row .1.3.6.1.4.1.2544.1.12.43.1.5.1

A conceptual row in the f3AccFlowPointCpdV2Table.
These entries represent a Control Protocol Disposition
filtering criteria on the Access Flow Point.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetAccPortIndex f3AccFlowPointIndex f3AccFlowPointCpdV2Index

Column	Syntax	OID
f3AccFlowPointCpdV2Index Unique Index value to access the CPD row.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.5.1.1
f3AccFlowPointCpdV2IslDispType Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.2
f3AccFlowPointCpdV2PagpDispType Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.3
f3AccFlowPointCpdV2UdldDispType Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.4
f3AccFlowPointCpdV2CdpDispType Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.5
f3AccFlowPointCpdV2VtpDispType Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.6
f3AccFlowPointCpdV2DtpDispType Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.7
f3AccFlowPointCpdV2PvstpPlusDispType Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.8
f3AccFlowPointCpdV2UplinkFastDispType Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.9
f3AccFlowPointCpdV2VlanBridgeDispType Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.10
f3AccFlowPointCpdV2L2PTDispType Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.11
f3AccFlowPointCpdV2BPDUDispType Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C2:00:00:00).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.12
f3AccFlowPointCpdV2PauseDispType Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.13
f3AccFlowPointCpdV2LACPDispType Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.14
f3AccFlowPointCpdV2LACPMarkerDispType Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.15
f3AccFlowPointCpdV2EfmOamDispType Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.16
f3AccFlowPointCpdV2SSMDispType Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.17
f3AccFlowPointCpdV2PortAuthenDispType Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.18
f3AccFlowPointCpdV2LANBridgesDispType Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.19
f3AccFlowPointCpdV2GMRPDispType Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.20
f3AccFlowPointCpdV2GVRPDispType Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21).	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.21
f3AccFlowPointCpdV2GARPDispType Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.22
f3AccFlowPointCpdV2ActiveControlProtocols List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longer active. This object provides information on all the activ…	CM-FACILITY-MIBCmActiveControlProtocolsType Type Values: 1 ciscoGroup 2 isl 3 pagp 4 udld 5 cdp 6 vtp 7 dtp 8 pvstpplus 9 uplinkfast 10 vlanbridge 11 l2pt 12 bridgegroup 13 bpdu 14 pause 15 lacp 16 lacpmarker 17 efmoam 18 ssm 19 portauthen 20 bridgereserved 21 lanbridges 22 garpgroup 23 gmrp 24 gvrp 25 garp 26 lldp 27 elmi 28 mac00 29 mac01 30 mac02 31 mac03 32 mac04 33 mac05 34 mac06 35 mac07 36 mac08 37 mac09 38 mac0A 39 mac0B 40 mac0C 41 mac0D 42 mac0E 43 mac0F 44 nearestlldp 45 nontpmrlldp 46 customerlldp 47 ptpNonfwdUntagged 48 ptpNonfwdTagged	.1.3.6.1.4.1.2544.1.12.43.1.5.1.23
f3AccFlowPointCpdV2ELMIDispType ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.24
f3AccFlowPointCpdV2Mac00DispType MAC Address 01:80:C2:00:00:00 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.25
f3AccFlowPointCpdV2Mac01DispType MAC Address 01:80:C2:00:00:01 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.26
f3AccFlowPointCpdV2Mac02DispType MAC Address 01:80:C2:00:00:02 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.27
f3AccFlowPointCpdV2Mac03DispType MAC Address 01:80:C2:00:00:03 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.28
f3AccFlowPointCpdV2Mac04DispType MAC Address 01:80:C2:00:00:04 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.29
f3AccFlowPointCpdV2Mac05DispType MAC Address 01:80:C2:00:00:05 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.30
f3AccFlowPointCpdV2Mac06DispType MAC Address 01:80:C2:00:00:06 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.31
f3AccFlowPointCpdV2Mac07DispType MAC Address 01:80:C2:00:00:07 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.32
f3AccFlowPointCpdV2Mac08DispType MAC Address 01:80:C2:00:00:08 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.33
f3AccFlowPointCpdV2Mac09DispType MAC Address 01:80:C2:00:00:09 Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.34
f3AccFlowPointCpdV2Mac0ADispType MAC Address 01:80:C2:00:00:0A Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.35
f3AccFlowPointCpdV2Mac0BDispType MAC Address 01:80:C2:00:00:0B Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.36
f3AccFlowPointCpdV2Mac0CDispType MAC Address 01:80:C2:00:00:0C Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.37
f3AccFlowPointCpdV2Mac0DDispType MAC Address 01:80:C2:00:00:0D Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.38
f3AccFlowPointCpdV2Mac0EDispType MAC Address 01:80:C2:00:00:0E Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.39
f3AccFlowPointCpdV2Mac0FDispType MAC Address 01:80:C2:00:00:0F Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.40
f3AccFlowPointCpdV2NearestLLDPDispType LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.41
f3AccFlowPointCpdV2NonTpmrLLDPDispType LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.42
f3AccFlowPointCpdV2CustomerLLDPDispType LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type.	CM-FACILITY-MIBCmControlProtocolDispTyper/w Type Values: 0 not-applicable 1 discard 2 peer 3 pass-thru 4 use-group-setting 5 not-active 6 use-port-setting 7 pass-thru-l2pt 8 useMacSetting	.1.3.6.1.4.1.2544.1.12.43.1.5.1.43

This table extends f3AccFlowPointTable to provide parameters for MAC Table control
configuration.

f3AccFlowPointLearningConfigEntry row .1.3.6.1.4.1.2544.1.12.43.1.6.1

A conceptual row in the f3AccFlowPointLearningConfigTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3AccFlowPointLearningConfigLearningEnabled This object allows configuring Learning Control on this Flowpoint.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.6.1.1
f3AccFlowPointLearningConfigMaxFwdEntries This object allows configuring the maximum number of Forwarding Entries on this Flowpoint.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.6.1.2
f3AccFlowPointLearningConfigProtectLearningCtrl This object allows configuring Learning Control on this Flowpoint.	F3-BRIDGE-MIBProtectLearningControlr/w Type Values: 1 none 2 discard 3 block	.1.3.6.1.4.1.2544.1.12.43.1.6.1.3
f3AccFlowPointLearningConfigAction This objects allows performing user action on Flow Learning Table.	F3-BRIDGE-MIBFlowLearningConfigActionr/w Type Values: 1 noAction 2 flushFwdTable 3 clearBlock 4 resetAgingTimer	.1.3.6.1.4.1.2544.1.12.43.1.6.1.4

A list of entries corresponding to Network Flow Point
for configuration purposes.

f3NetFlowPointEntry row .1.3.6.1.4.1.2544.1.12.43.1.7.1

A conceptual row in the f3NetFlowPointTable.
These entries represent an Network Flow Point.
If the Flow Point attached to a lag, the slotIndex should
be 255 (255 is used to identify the Flow Point belongs to lag),
and…

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetNetPortIndex f3NetFlowPointIndex

Column	Syntax	OID
f3NetFlowPointIndex The integer index value corresponding to an Flow Point.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.43.1.7.1.1
f3NetFlowPointAlias This object allows SNMP management entities to provide a circuit identifier with the Flow Point.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2544.1.12.43.1.7.1.2
f3NetFlowPointAdminState This object represents the Administrative State of the Flow Point.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.7.1.3
f3NetFlowPointOperationalState This object represents the Operational State of the Flow Point.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.7.1.4
f3NetFlowPointSecondaryState This object represents the Secondary State of the Flow Point.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.7.1.5
f3NetFlowPointAssociatedFlowId This object provides the association of an Flow with an Flow Point.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.6
f3NetFlowPointIngressMultiCOSEnabled This object allows specification of ingress multiple COS (Class of Service) Flow Point.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.7
f3NetFlowPointIngressCOSdeprecated This object allows specification of ingress COS (Class of Service) Flow Point. This attribute has been deprecated and is not supported. The Ingress COS is determined from the flowpoint's associated Priori…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.7.1.8
f3NetFlowPointEgressShapingType This object allows specification of Shaping Type for Flow Point. For 8.1.1 release, only flow-based Shaping Type is supported.	CM-FACILITY-MIBShapingTyper/w Type Values: 1 port-based 2 flow-based 3 llq	.1.3.6.1.4.1.2544.1.12.43.1.7.1.9
f3NetFlowPointIngressVlanMemberList It allows specification of VLAN members of the Flow Point. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* or X (vlan X with all p…	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2544.1.12.43.1.7.1.10
f3NetFlowPointVlanMemberAction This object allows to add or remove the VLAN members specified by f3NetFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to be added/removed in the object f3NetFlowPointVlanMemberAc…	CM-FACILITY-MIBFlowVlanActionTyper/w Type Values: 1 no-action 2 add-vlan 3 remove-vlan	.1.3.6.1.4.1.2544.1.12.43.1.7.1.11
f3NetFlowPointVlanMemberActionVlan This object allows adding/removing VLAN members to a Flow Point. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members can be of the form X-* (vlan X with all priorities), *-Y (…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.43.1.7.1.12
f3NetFlowPointIngressUntaggedFrameEnabled This object allows to specify whether or not the Flow Point supports untagged frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.13
f3NetFlowPointCTagControl This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointCTagVlanId) and …	CM-FACILITY-MIBFlowTagControlr/w Type Values: 1 none 2 push 3 swapvid 4 pushvid 5 pop 6 pushisid	.1.3.6.1.4.1.2544.1.12.43.1.7.1.14
f3NetFlowPointCTagVlanId This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.43.1.7.1.15
f3NetFlowPointCTagVlanPriority This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressCTagControl. It is applicable for 'push' and 'swaptag' control types.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.43.1.7.1.16
f3NetFlowPointSTagControl This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the type is 'push', the VLAN Id (f3NetFlowPointSTagVlanId) and…	CM-FACILITY-MIBFlowTagControlr/w Type Values: 1 none 2 push 3 swapvid 4 pushvid 5 pop 6 pushisid	.1.3.6.1.4.1.2544.1.12.43.1.7.1.17
f3NetFlowPointSTagVlanId This object allows specification of the VLAN Id to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push', 'swaptag', 'swapvid' and 'pushvid' control types.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.43.1.7.1.18
f3NetFlowPointSTagVlanPriority This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of f3NetFlowPointIngressSTagControl. It is applicable for 'push' and 'swaptag' control types.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.43.1.7.1.19
f3NetFlowPointEgressOuterTagPrioMapEnabled This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified CO…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.20
f3NetFlowPointEgressInnerTagPrioMapEnabled This object defines whether to use the Egress Prio Mapping to swap the priority of inner tag. When Enabled, it indicates that the operation specified in the EgressPrioMapTable would be applied to Flow for specified COS…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.21
f3NetFlowPointSESFramesLossThresholdRatio This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applicable if the flowpoint is monitored using the Y.1731 ESA fu…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.12.43.1.7.1.22
f3NetFlowPointDefaultMemberEnabled Truth Value means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untagged means untagged flow. Default only care tagged flow.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.23
f3NetFlowPointMcastRateLimitEnabled Whether multicast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.24
f3NetFlowPointMcastRateLimitSpeedLo The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.25
f3NetFlowPointMcastRateLimitSpeedHi The rate limiting for multicast packets per FP. When f3NetFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.26
f3NetFlowPointBcastRateLimitEnabled Whether broadcast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.27
f3NetFlowPointBcastRateLimitSpeedLo The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.28
f3NetFlowPointBcastRateLimitSpeedHi The rate limiting for broadcast packets per FP. When f3NetFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.29
f3NetFlowPointCombinedRateLimitEnabled Whether broadcast and multicast packets need be limited per FP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.30
f3NetFlowPointCombinedRateLimitSpeedLo The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.31
f3NetFlowPointCombinedRateLimitSpeedHi The rate limiting for broadcast and multicast packets per FP. When f3NetFlowPointCombinedRateLimitEnabled is true and the value is 0, it means all broadcast and multicast frame are dropped. This object only represents …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.32
f3NetFlowPointSplitHorizonGroupOID Specifies the Split-Horizon Group OID. If there is no SHG, the value is none.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.33
f3NetFlowPointLoopAvoidance EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN service is created.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.34
f3NetFlowPointHierarchicalCOSEnabled Enable or Disable Hierarchical COS shaping (flow shaping).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.35
f3NetFlowPointMaximumBWLo This attribute description the Flow Point maximum bandwidth. This object only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.36
f3NetFlowPointMaximumBWHi This attribute description the Flow Point maximum bandwidth. This object only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.37
f3NetFlowPointGuaranteedBWLo This attribute description the Flow Point guaranteed bandwidth. This object only represents low 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.38
f3NetFlowPointGuaranteedBWHi This attribute description the Flow Point guaranteed bandwidth. This objects only represents high 32 bits.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.7.1.39
f3NetFlowPointAutoBandwidthConfigEnabled This object specifies the shaper bandwidth is automatically adjusted by the system. For a single COS Flow Point, the shaper EIR bandwidth is set to the maximum port bandwidth; the shaper CIR is set to the available p…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.40
f3NetFlowPointAutoCIRPercentage This object specifies the percentage of available shaper CIR to be assigned to this Flow Point when f3NetFlowPointAutoBandwidthConfigEnabled is TRUE.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2544.1.12.43.1.7.1.41
f3NetFlowPointFrameFwdEnabled When enabled Flow Point will forward frames it receives. When disabled, the Flow Point will not forward frames it receives.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.42
f3NetFlowPointStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.7.1.43
f3NetFlowPointRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.7.1.44
f3NetFlowPointUsePortPrioMapProfile This indicates whether the flow point is using, if true, the port's Priority Mapping Profile or, if false, is using its own Priority Mapping Profile.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.45
f3NetFlowPointRefPrioMapProfile This object allows to set priority map profile.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.46
f3NetFlowpointRefConnectGuardFlowObject This object specifies Mac Sec flow object OID.	SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.47
f3NetFlowpointSecureBlockingControl This object can be used to enable/disable secure block.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.7.1.48
f3NetFlowpointSecureState This object specifies the secure state of this flow.	CM-COMMON-MIBFlowSecState Type Values: 1 secureNormal 2 secureBlocked 3 unsecureNormal 4 unsecureBlocked	.1.3.6.1.4.1.2544.1.12.43.1.7.1.49

A list of entries corresponding to Net Flow Point 
Quality of Service Shaper for configuration purposes.

f3NetFpQosShaperEntry row .1.3.6.1.4.1.2544.1.12.43.1.8.1

A conceptual row in the f3NetFpQosShaperTable.
These entries represent an Net Flow Point Quality
of Service Shaper.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetNetPortIndex f3NetFlowPointIndex f3NetFpQosShaperIndex

Column	Syntax	OID
f3NetFpQosShaperIndex The unique integer index value corresponding to a Quality of Service Shaper.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2544.1.12.43.1.8.1.1
f3NetFpQosShaperAdminState This object represents the Administrative State of a Shaper.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.8.1.2
f3NetFpQosShaperOperationalState This object represents the Operational State of a Shaper.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.8.1.3
f3NetFpQosShaperSecondaryState This object represents the Secondary State of the Shaper.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.8.1.4
f3NetFpQosShaperCIRLo This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.5
f3NetFpQosShaperCIRHi This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.6
f3NetFpQosShaperEIRLo This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.7
f3NetFpQosShaperEIRHi This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.8
f3NetFpQosShaperCBS This object represents the Commited Burst Size (CBS) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.9
f3NetFpQosShaperEBS This object represents the Excess Burst Size (EBS) of a Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.10
f3NetFpQosShaperBufferSize This object represents the Buffer Size of the Shaper.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.8.1.11
f3NetFpQosShaperCOS This object provides the COS (Class of Service) value for the QOS Shaper.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2544.1.12.43.1.8.1.12
f3NetFpQosShaperStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.8.1.13
f3NetFpQosShaperRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.8.1.14

A list of entries corresponding to Net Flow Point
Quality of Service Policer for configuration purposes.

f3NetFpQosPolicerEntry row .1.3.6.1.4.1.2544.1.12.43.1.9.1

A conceptual row in the f3NetFpQosPolicerTable.
These entries represent an Net Flow Point Quality
of Service Policer.

Indexes

CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetNetPortIndex f3NetFlowPointIndex f3NetFpQosPolicerIndex

Column	Syntax	OID
f3NetFpQosPolicerIndex The unique integer index value corresponding to a Quality of Service Policer. The Policer Index represents the COS level. This is applicable in case of a Multi COS Flow Point. Index 1 represents COS 0; Index 2 represen…	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2544.1.12.43.1.9.1.1
f3NetFpQosPolicerAdminState This object represents the Administrative State of a Policer.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.43.1.9.1.2
f3NetFpQosPolicerOperationalState This object represents the Operational State of a Policer.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.43.1.9.1.3
f3NetFpQosPolicerSecondaryState This object represents the Secondary State of a Policer.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.43.1.9.1.4
f3NetFpQosPolicerCIRLo This object represents the Commited Information Rate (CIR) (Lower 32 bits) of the Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.9.1.5
f3NetFpQosPolicerCIRHi This object represents the Commited Information Rate (CIR) (Higher 32 bits) of the Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.9.1.6
f3NetFpQosPolicerEIRLo This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.9.1.7
f3NetFpQosPolicerEIRHi This object represents the Excess Information Rate (EIR) (Lower 32 bits) of a Policer.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.43.1.9.1.8
f3NetFpQosPolicerCBS This object represents the Commited Burst Size (CBS) of a Policer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.9.1.9
f3NetFpQosPolicerEBS This object represents the Excess Burst Size (EBS) of a Policer.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.43.1.9.1.10
f3NetFpQosPolicerAlgorithm This object represents Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).	CM-FACILITY-MIBPolicerAlgorithmType Type Values: 1 srTCM 2 trTCM	.1.3.6.1.4.1.2544.1.12.43.1.9.1.11
f3NetFpQosPolicerColorMode This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.	CM-FACILITY-MIBPolicerColorModer/w Type Values: 1 color-aware 2 color-blind	.1.3.6.1.4.1.2544.1.12.43.1.9.1.12
f3NetFpQosPolicerCouplingFlag This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.9.1.13
f3NetFpQosPolicerPolicingEnabled This object allows specification of Policer Policing. When Policing is disabled, traffic policing is bypassed. When Policing is enabled, traffic policing is applied.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.43.1.9.1.14
f3NetFpQosPolicerStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.43.1.9.1.15
f3NetFpQosPolicerRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.43.1.9.1.16