F3-ERP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
71
.1.3.6.1.4.1.2544.1.12.25.1.1 · 1 row entry · 40 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3ErpGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-ERP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-ERP-MIB::f3ErpGroupTable'
A list of entries corresponding to Ethernet Ring Protection 
instance for configuration purposes.
f3ErpGroupEntry row .1.3.6.1.4.1.2544.1.12.25.1.1.1
A conceptual row in the f3ErpGroupTable.
Column Syntax OID
An integer index value used to uniquely identify
this ERP Group within Network Element.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.2544.1.12.25.1.1.1.1
Administrative State of this ERP instance.
INSERVICE is normal operation.
MANAGEMENT suppresses alarms.
DISABLED initiates blocking on ring port 0 and stops all RAPS processing
and forwarding.
The ERP instance must …
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
.1.3.6.1.4.1.2544.1.12.25.1.1.1.2
Operational State of this ERP instance. The ERP operational state is
outage when there is an equipment failure causing the ERP to be non-functional;
otherwise the operational state is normal.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
.1.3.6.1.4.1.2544.1.12.25.1.1.1.3
Secondary State of this ERP instance. The ERP secondary state is
supporting entity outage (SGEO) when there is an equipment failure
causing the ERP to be non-functional; otherwise the sescondary state is active.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
.1.3.6.1.4.1.2544.1.12.25.1.1.1.4
Ring ID of this ERP instance. The value is used in the destination
address of the RAPS PDU.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.2544.1.12.25.1.1.1.5
Node ID of the local system for this ERP instance.
The value is used as the Node ID in the RAPS PDU.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2544.1.12.25.1.1.1.6
VID value of the VLAN tag for transmitted/received RAPS PDUs for this
ERP instance.
CM-COMMON-MIBVlanIdr/w
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.2544.1.12.25.1.1.1.7
P-bit value of the VLAN tag for transmitted RAPS PDUs for this ERP instance.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.2544.1.12.25.1.1.1.8
VID value of the VLAN tag for transmitted/received RAPS PDUs for this
ERP instance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.1.1.1.9
MD (or MEG) level of the transmitted/received RAPS PDUs for this ERP instance.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Type Constraints:
range: 0..7
.1.3.6.1.4.1.2544.1.12.25.1.1.1.10
Indicates compatability with a version of G.8032 for this ring instance.
G8032Versionr/w
Type Values:
1v1
2v2
.1.3.6.1.4.1.2544.1.12.25.1.1.1.11
Revertive control for the ring. Only applicable on the RPL Owner node.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.12
Indicates whether R-APS channel forms a closed loop around the ring
ENABLED: no RAPS Virtual Channel (i.e., open ring)
DISABLED: RAPS forms a closed loop (major ring or sub-ring with virtual
channel)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.13
The Guard Time value in milliseconds for this ERP instance.
Integer32r/w
Constraints:
range: 10-2000
.1.3.6.1.4.1.2544.1.12.25.1.1.1.14
The Wait-to-Restore time value in minutes for this ERP instance.
Integer32r/w
Constraints:
range: 1-12
.1.3.6.1.4.1.2544.1.12.25.1.1.1.15
The Hold-off Time value in milliseconds for this ERP instance.
Integer32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.2544.1.12.25.1.1.1.16
Pointer to a Port instance which represents Ring Port 0 in the ERP Group.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port
is …
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.17
Pointer to a CFM MEP instance monitoring Ring Port 0 for this ERP instance.
The pointer must be set to dot1agCfmMepIfIndex instance.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.18
RPL Role of Ring Port 0. When f3ErpGroupRingPort1Role is NEIGHBOR or OWNER,
this value MUST be NONE.
RPLRoler/w
Type Values:
1none
2neighbor
3owner
.1.3.6.1.4.1.2544.1.12.25.1.1.1.19
Pointer to a Port instance which represents Ring Port 1 in the ERP Group.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
Port is an Access Port or to cmEthernetNetPortIndex if the Ring Port
is …
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.20
Pointer to a CFM MEP instance monitoring Ring Port 1 for this ERP instance.
The pointer must be set to dot1agCfmMepIfIndex instance.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.21
RPL Role of Ring Port 1. When f3ErpGroupRingPort0Role is NEIGHBOR or OWNER,
this value MUST be NONE.
RPLRoler/w
Type Values:
1none
2neighbor
3owner
.1.3.6.1.4.1.2544.1.12.25.1.1.1.22
Indication of whether this ERP instance is protecting management Tunnels
on the ring ports.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.23
ERP Node state.
RingNodeState
Type Values:
1idle
2protection
3manual
4forced
5pending
.1.3.6.1.4.1.2544.1.12.25.1.1.1.24
The time remaining (in seconds) for this ERP instance to wait to restore.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2544.1.12.25.1.1.1.25
Request/State field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking.
RAPSRequest
Type Values:
1noRequest
2manual
3forced
4signailFail
5signailDegrade
6notApplicable
.1.3.6.1.4.1.2544.1.12.25.1.1.1.26
RPL Blocked field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.27
Do Not Flush field fo the last generated R-APS message on the Ring Ports.
Valid when the node is blocking.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.28
Blocked Port Reference field fo the last generated R-APS message on the
Ring Ports. Valid when the node is blocking.
Integer32
Constraints:
range: 0-1
.1.3.6.1.4.1.2544.1.12.25.1.1.1.29
User action performed on this ERP instance.
For manualSwitch and forcedSwitch actions f3ErpGroupActionObject has to
be specified prior to settng this object.
ERPGroupActionr/w
Type Values:
1noAction
2forcedSwitch
3manualSwitch
4clearSwitch
5resetStats
.1.3.6.1.4.1.2544.1.12.25.1.1.1.30
Object identfier used to specify the OID of a port on which
f3ErpGroupAction should occur. Applicable for manualSwitch and forcedSwitch
actions.
The pointer must be set to cmEthernetAccPortIndex instance if the Ring
P…
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.31
User Label associated with the ERP Group.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.2544.1.12.25.1.1.1.32
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.2544.1.12.25.1.1.1.33
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2544.1.12.25.1.1.1.34
Oid of the associated Loop Avoidance instance at an interconnect
node. Current only ERP instances are supported for this;
in the future, STP instances may be as well.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.35
Allows for propgation of Topology Change information in the
protocol of the associated Loop Avoidance instance at an
interconnect node. Derived from MI_RAPS_Propagate_TC in [G8032]
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.36
ID of MEP monitoring an UP MEP Monitoring the R-APS VID.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.1.1.37
The max number of flow point which the erp supports.
This object is not supported - setting its value will
not have any effect on the System.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2544.1.12.25.1.1.1.38
Type of sub-ring interconnection node. PRIMARY/SECONDARY role
for minimizing interconnected ring segmentation.
RapsInterconnectionNoder/w
Type Values:
1none
2primary
3secondary
.1.3.6.1.4.1.2544.1.12.25.1.1.1.39
Sub-ring interconnection node that is designated to perform the Manual
Switch for minimizing interconnected ring segmentation.
RapsMultipleFailurer/w
Type Values:
1disabled
2primary
3secondary
.1.3.6.1.4.1.2544.1.12.25.1.1.1.40
.1.3.6.1.4.1.2544.1.12.25.1.2 · 1 row entry · 1 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3ErpGroupProtectedFlowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-ERP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-ERP-MIB::f3ErpGroupProtectedFlowTable'
A list of entries corresponding to Flows which are protected by 
an ERP group instance. These flows can be access flows or multipoint
flows depending on the traffic model of the ERP Ring Port.
f3ErpGroupProtectedFlowEntry row .1.3.6.1.4.1.2544.1.12.25.1.2.1
A conceptual row in the f3ErpGroupProtectedFlowsTable.
Column Syntax OID
Pointer to a Flow instance which is protected by an ERP instance.
The pointer must be set to cmFlowIndex or cmMPFlowIndex instance.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.2.1.1
.1.3.6.1.4.1.2544.1.12.25.1.3 · 1 row entry · 11 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3ErpUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-ERP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-ERP-MIB::f3ErpUnitTable'
A list of entries corresponding to Ethernet Ring Protection Unit
f3ErpUnitEntry row .1.3.6.1.4.1.2544.1.12.25.1.3.1
A conceptual row in the f3ErpUnitTable.
Column Syntax OID
An integer index value used to uniquely identify
this ERP Unit within ERP Group.
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2544.1.12.25.1.3.1.1
ERP Unit's points to a facility (port).
This object represents the facility Network Element port.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.3.1.2
Pointer to a CFM MEP instance monitoring Ring Port.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.3.1.3
RPL Role of Ring Port 1. When f3ErpGroupRingPort2Role is NEIGHBOR or OWNER,
this value MUST be NONE.
RPLRole
Type Values:
1none
2neighbor
3owner
.1.3.6.1.4.1.2544.1.12.25.1.3.1.4
Status of Ring Port.
RingPortStatus
Type Values:
1unblocked
2unblockedSF
3unblockedSD
4blockedRPL
5blockedSF
6blockedSD
7blockedMS
8blockedFS
9blockedPending
10subringInterConnect
11subringInterConnectSF
.1.3.6.1.4.1.2544.1.12.25.1.3.1.5
Request/State field fo the last received R-APS message on Ring Port.
RAPSRequest
Type Values:
1noRequest
2manual
3forced
4signailFail
5signailDegrade
6notApplicable
.1.3.6.1.4.1.2544.1.12.25.1.3.1.6
RPL Blocked field fo the last received R-APS message on Ring Port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.3.1.7
Do Not Flush field fo the last received R-APS message on Ring Port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2544.1.12.25.1.3.1.8
Blocked Port Reference field fo the last received R-APS message on Ring Port.
Integer32
Constraints:
range: 0-1
.1.3.6.1.4.1.2544.1.12.25.1.3.1.9
Node ID of the local system for this ERP instance.
The value is used as the Node ID in the RAPS PDU.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2544.1.12.25.1.3.1.10
Pointer to a R-APS FlowPoint associated with this Ring Port.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
.1.3.6.1.4.1.2544.1.12.25.1.3.1.11
.1.3.6.1.4.1.2544.1.12.25.2.1 · 1 row entry · 19 columns
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk f3ErpUnitStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-ERP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-ERP-MIB::f3ErpUnitStatsTable'
A list of entries corresponding to Ethernet Ring Protection Unit Statistics
f3ErpUnitStatsEntry row .1.3.6.1.4.1.2544.1.12.25.2.1.1
A conceptual row in the f3ErpUnitStatsTable.
Column Syntax OID
Total number of transitions into a blocking state for Ring Port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.1
Count of all RAPS PDUs transmitted on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.2
Count of all RAPS PDUs received on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.3
Count of all RAPS PDUs received on the port and discarded where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.4
Count of No Request RAPS PDUs transmitted on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.5
Count of No Request, RPL Blocked RAPS PDUs transmitted on the port where
the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.6
Count of Signal Fail RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.7
Count of Manual Switch RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.8
Count of Forced Switch RAPS PDUs transmitted on the port where the
PDU contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.9
Count of Event RAPS PDUs transmitted on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.10
Count of No Request RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.11
Count of No Request, RPL Blocked RAPS PDUs received on the port where
the PDU contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.12
Count of Signal Fail RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.13
Count of Manual Switch RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.14
Count of Forced Switch RAPS PDUs received on the port where the PDU
contains the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.15
Count of Event RAPS PDUs received on the port where the PDU contains
the MEG Level, Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.16
Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance and an OAM Version field other
than 0 or 1.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.17
Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.18
Count of OAM PDUs received on the port where the PDU contains the MEG Level,
Ring ID and VID for the ERP instance, an OAM Opcode field of 40 (R-APS),
a request/state value of 14 (EVT) and a sub-code value that is not …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2544.1.12.25.2.1.1.19