F3-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
55

cfmMepTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.2 · 1 row entry · 23 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmMepTable' 
Additional MEP configuration such as Y.1731 configuration.
cfmMepEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.2.1
A list of additional MEP parameters such the Y.1731 parameters.
Indexes
No indexes recorded
Column Syntax OID
cfmMepAdminState
This object represents the Administrative State of the CFM MEPs.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1
cfmMepAisGenTriggerTypes
A bit mask which indicates all the defects that result in triggering
an AIS for the higher level MEP or transmission of ETH-AIS.
CfmAisGenTriggerTypesr/w
Type Values:
0bAisDefRemoteCCM
1bAisDefErrorCCM
2bAisDefXconCCM
3bAisDefAis
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2
cfmMepAisClientMdLevel
AIS Client MD level which is the MD level used to identify any
higher level local MEPs for which AIS defect needs to be set or
MD level of the ETH-AIS frame generated if there are no local MEPs
at this MD level.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3
cfmMepAisInterval
ETH-AIS frame transmission interval if decision is made to transmit the
ETH-AIS frame.
CfmAisIntervalr/w
Type Values:
1aisInterval1sec
2aisInterval1min
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4
cfmMepAisGenEnabled
This flag enables/disables propagation of ETH-AIS to client MD levels.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5
cfmMepAisPriority
This VLAN priority of the ETH-AIS frame.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6
cfmMepLmTxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMM frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is restricted to support counting
of frames for…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7
cfmMepLmRxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMR frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is restricted to support counting
of frames for…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8
cfmMepLmDualEndedCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and CCM frames
are transmitted with loss measurement counts. As per Y.1731, loss
measurement should be done per priority class. The implementation is
restricted to s…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9
cfmMepLmCountInProfileEnabled
As per the Y.1731 data frames counted for loss measurement shall be
in-profile (green) data frames. As an added value, this flag is
provided for the device to count all frames instead of green frames
only. This flag cou…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10
cfmMepLmTxPriority
This attribute is used if cfmMepLmTxCountAllPrios is false.
This attribute serves three purposes:
- It is the VLAN priority of the LMM.
- Data frames transmitted and received with this VLAN priority
are counted by the…
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11
cfmMepDmPriority
This attribute specifies the DMM frame VLAN priority.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12
cfmMepRxCCMs
This provides the total number of received CCMs on the MEP.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13
cfmMepErrCCMs
This provides the total number of errored CCMs on the MEP.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14
cfmMepLLFTriggerTypes
This bit mask indicates the CFM triggers that result in link loss
forwarding.
CfmLLFTriggerTypesr/w
Type Values:
0bAis
1bCcmIfStatusTlv
2bRemoteCCM
3bRDI
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15
cfmMepDefects
This bit mask indicates defects that not defined in standard 802.1ag
MIB such as AIS defect.
CfmMepDefects
Type Values:
0bDefAIS
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16
cfmMepTagEtherType
This object allows management of Ether Type for MEP VLAN Tag for the MEPs.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17
cfmMepStatsAction
Allows the Manager to clear the CFM level
statistics : cfmMepRxCCMs, cfmMepErrCCMs.
CM-COMMON-MIBCmPmBinActionr/w
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18
cfmMepLbmInterval
ETH-LBM frame transmission interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19
cfmMepOperationalState
This object represents the Operational State of the CFM MEP.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20
cfmMepSecondaryState
This object represents the Secondary State of the CFM MEP.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21
cfmMepSlmEnabled
This bit mask indicates the whether SLM is enabled per each COS.
CfmSlmEnabledTypesr/w
Type Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22
cfmMepAssociatedObject
This object represents the associated port, it could be port, flow or flow point.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23

cfmAccPortQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmAccPortQosShaperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmAccPortQosShaperTable' 
A list of configurable profile entries for CFM QoS Shapers for Access Port.
cfmAccPortQosShaperEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.3.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Access Port.
Indexes
Column Syntax OID
cfmAccPortQosShaperIndex
A unique index associated with the type of Access Port Based Shaper.
Index 1 refers to the Shaper associated with PORT-based Down MEPs,
Index 2 refers to the Shaper associated with the VID-based Down MEPs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.1
cfmAccPortQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.2
cfmAccPortQosShaperBufSize
This object identifies the queue buffer size.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.3
cfmAccPortQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.4

cfmNetPortQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmNetPortQosShaperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmNetPortQosShaperTable' 
A list of configurable profile entries for CFM QoS Shapers for Network Port.
cfmNetPortQosShaperEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.4.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Network Port.
Indexes
Column Syntax OID
cfmNetPortQosShaperTypeIndex
A unique index associated with the type of Network Port Based Shaper.
Index 1 refers to the Shaper associated with PORT-based Down MEPs,
Index 2 refers to the Shaper associated with the VID-based Down MEPs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.1
cfmNetPortQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.2
cfmNetPortQosShaperBufSize
This object identifies the queue buffer size.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.3
cfmNetPortQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.4

cfmServerMepTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.5 · 1 row entry · 11 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmServerMepTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmServerMepTable' 
Server MEP management table.
cfmServerMepEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.5.1
This allows management of Server MEPs.
Indexes
Column Syntax OID
cfmServerMepIndex
The integer index value corresponding to a Server MEP.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.1
cfmServerMepAssociatedPort
This is the port on which the CFM Server MEP is created.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.2
cfmServerMepAisClientMdLevel
AIS Client MD level which is the MD level used to identify any
higher level local MEPs for which AIS defect needs to be set or
MD level of the ETH-AIS frame generated if there are no local MEPs
at this MD level.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.3
cfmServerMepAisInterval
ETH-AIS frame transmission interval if decision is made to transmit the
ETH-AIS frame.
CfmAisIntervalr/w
Type Values:
1aisInterval1sec
2aisInterval1min
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.4
cfmServerMepAisGenEnabled
This flag enables/disables propagation of ETH-AIS to client MD levels.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.5
cfmServerMepAisPriority
This VLAN priority of the ETH-AIS frame.
CM-COMMON-MIBVlanPriorityr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.6
cfmServerMepStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.7
cfmServerMepRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.8
cfmServerMepAdminState
This object represents the Administrative State of the Server MEP.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.9
cfmServerMepOperationalState
This object represents the Operational State of the Server MEP.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.10
cfmServerMepSecondaryState
This object represents the Secondary State of the CFM MEP.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.11

cfmDownMEPQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmDownMEPQosShaperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmDownMEPQosShaperTable' 
A list of configurable profile entries for CFM QoS Shapers for down MEPs.
cfmDownMEPQosShaperEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.6.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Port. Note, this queues is valid for port based Down MEPs, VID based down MEPs on…
Indexes
Column Syntax OID
cfmDownMEPQosShaperIndex
A unique index associated with the Shaper for Down MEPs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.1
cfmDownMEPQosShaperType
Type of Shaper for Down MEPs.
1 refers to the Shaper associated with Down MEPs(for both port based and VID based) fot Transimit direction,
2 refers to the Shaper associated with Down MEPs(for both port based and VID ba…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.2
cfmDownMEPQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.3
cfmDownMEPQosShaperProfile
This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.4
cfmDownMEPQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.5

cfmMepExcludedMepListTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.7 · 1 row entry · 2 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmMepExcludedMepListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmMepExcludedMepListTable' 
A list of configurable profile entries for CFM excluded mep list.
cfmMepExcludedMepListEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.7.1
Excluded Remote Mep List for local Mep, not expected to receive OAM from these MEPs.
Indexes
Column Syntax OID
cfmMepExcludedMepListIdentifier
A unique index associated with CfmMepExcludedMepListEntry.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2544.1.12.13.1.1.7.1.1
cfmMepExcludedMepListRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.13.1.1.7.1.2

cfmMepLbrTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.8 · 1 row entry · 4 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmMepLbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmMepLbrTable' 
A list of configurable profile entries for MepLbr.
cfmMepLbrEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.8.1
MEP LBR statistic table.
Indexes
Column Syntax OID
cfmMepLbrMacAddress
Source Mac Address of LBR.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.1
cfmMepLbrMepId
Remote MEP ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.2
cfmMepLbrInOrder
Total valid in-order LBR received.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.3
cfmMepLbrOutOfOder
Total valid out of order LBR received.
CM-COMMON-MIBPerfCounter64 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.4

cfmMaCompTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.9 · 1 row entry · 2 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk cfmMaCompTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-CFM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-CFM-MIB::cfmMaCompTable' 
A additional list of MA components.
cfmMaCompEntry row .1.3.6.1.4.1.2544.1.12.13.1.1.9.1
A list of additional maCompEntry.
Indexes
No indexes recorded
Column Syntax OID
cfmMaCompIndex
This object represents the maComp number value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.9.1.1
cfmMaCompEntity
This object represents the maComp entity, it is should be port or flow's oid.
SNMPv2-TCVariablePointerr/w
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.13.1.1.9.1.2