F3-BFD-MIB Table View

This table has list of entries with which FSPNM can associate some
information in the form of name-value pairs.
NOTE: This table is for FSPNM use only.

bfdSessExtEntry row .1.3.6.1.4.1.2544.1.12.38.1.1.1

The conceptual row in bfdSessExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
bfdSessExtInnerVlanControl This object allows to specify whether enable inner Vlan Tag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.38.1.1.1.1
bfdSessExtInnerVlanId This object allows to specify inner VlanId.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.38.1.1.1.2
bfdSessExtInnerVlanPri This object allows to specify inner Vlan Priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.38.1.1.1.3
bfdSessExtOuterVlanControl This object allows to specify whether enable outer Vlan Tag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.38.1.1.1.4
bfdSessExtOuterVlanId This object allows to specify outer VlanId.	CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.2544.1.12.38.1.1.1.5
bfdSessExtOuterVlanPri This object allows to specify outer Vlan Priority.	CM-COMMON-MIBVlanPriorityr/w Type Constraints: range: 0..7	.1.3.6.1.4.1.2544.1.12.38.1.1.1.6
bfdSessExtIpPri This object allows to specify IP DSCP value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.38.1.1.1.7
bfdSessExtIpGateway This object allows to specify IP gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.38.1.1.1.8
bfdSessExtAdminState This object represents the Administrative State of the BFD session.	CM-COMMON-MIBAdminStater/w Type Values: 1 in-service 2 management 3 maintenance 4 disabled 5 unassigned 6 monitored	.1.3.6.1.4.1.2544.1.12.38.1.1.1.9
bfdSessExtOperationalState This object represents the Operational State of the BFD session.	CM-COMMON-MIBOperationalState Type Values: 1 normal 2 outage	.1.3.6.1.4.1.2544.1.12.38.1.1.1.10
bfdSessExtSecondaryState This object represents the Secondary State of the BFD session.	CM-COMMON-MIBSecondaryState Type Values: 0 not-applicable 1 active 2 automaticinservice 3 facilityfailure 4 fault 5 loopback 6 maintenance 7 mismatchedeqpt 8 standbyhot 9 supportingentityoutage 10 unassigned 11 unequipped 12 disabled 13 forcedoffline 14 initializing 15 prtcl 16 blckd 17 mon-tx 18 mir-rx 19 cema 20 lkdo	.1.3.6.1.4.1.2544.1.12.38.1.1.1.11
bfdSessExtNegRxInterval This object represents negatiated recieve direction interval of the BFD session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2544.1.12.38.1.1.1.12
bfdSessExtAlias This object represents the alias of the BFD session.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2544.1.12.38.1.1.1.13
bfdSessExtAction This object allows to perform some action on the bfd session.	BfdSessPerfActionr/w Type Values: 0 notApplicable 1 clearCtrlPkts	.1.3.6.1.4.1.2544.1.12.38.1.1.1.14

A list of entries for the BFD Traffic Ip Interface member.

f3BfdIpIfMemberEntry row .1.3.6.1.4.1.2544.1.12.38.1.2.1

A conceptual row in the f3BfdIpIfMemberTable.

Indexes

BFD-STD-MIBbfdSessIndex f3BfdIpIfMemberObject

Column	Syntax	OID
f3BfdIpIfMemberObject This object describes the traffic ip interface.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.38.1.2.1.1
f3BfdIpIfMemberStorageType The type of storage configured for this entry.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.38.1.2.1.2
f3BfdIpIfMemberRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.38.1.2.1.3

A list of entries corresponding to traffic ip interface for configuration purposes.

f3L3TrafficIPInterfaceExtBfdEntry row .1.3.6.1.4.1.2544.1.12.38.1.3.1

A conceptual row in the f3L3TrafficIPInterfaceExtBfdTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3L3TrafficIPInterfaceExtBfdObject This object describes the BFD object OID.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.38.1.3.1.1