F3-AMP-MIB

        This module defines the Automatic Management Provisioning MIB definitions
used by the F3 (FSP150CM/CC) product lines.  
Copyright (C) ADVA Optical Networking.
    
Source file
F3-AMP-MIB
Last revised
Identity
f3AMPMIB
Base OID
1.3.6.1.4.1.2544.1.12.24
Imported Objects
ADVA-MIB fsp150cm
CM-COMMON-MIB VlanId
CM-IP-MIB IpManagementTunnelEncapsulationType IpManagementTunnelType IpSourceAddrType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue VariablePointer
Net-SNMP examples using the adva MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'F3-AMP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'F3-AMP-MIB::f3AMPMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-AMP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-AMP-MIB::f3AMPMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (55)
.1.3.6.1.4.1.2544.1.12.24
.1.3.6.1.4.1.2544.1.12.24.1
.1.3.6.1.4.1.2544.1.12.24.1.1
.1.3.6.1.4.1.2544.1.12.24.1.1.1
Integer32
.1.3.6.1.4.1.2544.1.12.24.1.1.1.1
.1.3.6.1.4.1.2544.1.12.24.1.1.1.10
.1.3.6.1.4.1.2544.1.12.24.1.1.1.11
.1.3.6.1.4.1.2544.1.12.24.1.1.1.12
.1.3.6.1.4.1.2544.1.12.24.1.1.1.13
Integer32
.1.3.6.1.4.1.2544.1.12.24.1.1.1.14
.1.3.6.1.4.1.2544.1.12.24.1.1.1.15
.1.3.6.1.4.1.2544.1.12.24.1.1.1.16
.1.3.6.1.4.1.2544.1.12.24.1.1.1.17
.1.3.6.1.4.1.2544.1.12.24.1.1.1.18
.1.3.6.1.4.1.2544.1.12.24.1.1.1.19
.1.3.6.1.4.1.2544.1.12.24.1.1.1.2
.1.3.6.1.4.1.2544.1.12.24.1.1.1.20
.1.3.6.1.4.1.2544.1.12.24.1.1.1.21
.1.3.6.1.4.1.2544.1.12.24.1.1.1.22
Integer32
.1.3.6.1.4.1.2544.1.12.24.1.1.1.23
.1.3.6.1.4.1.2544.1.12.24.1.1.1.24
.1.3.6.1.4.1.2544.1.12.24.1.1.1.25
.1.3.6.1.4.1.2544.1.12.24.1.1.1.26
.1.3.6.1.4.1.2544.1.12.24.1.1.1.27
.1.3.6.1.4.1.2544.1.12.24.1.1.1.28
.1.3.6.1.4.1.2544.1.12.24.1.1.1.29
.1.3.6.1.4.1.2544.1.12.24.1.1.1.3
.1.3.6.1.4.1.2544.1.12.24.1.1.1.30
.1.3.6.1.4.1.2544.1.12.24.1.1.1.31
.1.3.6.1.4.1.2544.1.12.24.1.1.1.4
.1.3.6.1.4.1.2544.1.12.24.1.1.1.5
.1.3.6.1.4.1.2544.1.12.24.1.1.1.6
.1.3.6.1.4.1.2544.1.12.24.1.1.1.7
.1.3.6.1.4.1.2544.1.12.24.1.1.1.8
.1.3.6.1.4.1.2544.1.12.24.1.1.1.9
.1.3.6.1.4.1.2544.1.12.24.2
.1.3.6.1.4.1.2544.1.12.24.2.1
.1.3.6.1.4.1.2544.1.12.24.2.1.1
.1.3.6.1.4.1.2544.1.12.24.2.1.1.1
.1.3.6.1.4.1.2544.1.12.24.2.1.1.10
.1.3.6.1.4.1.2544.1.12.24.2.1.1.11
.1.3.6.1.4.1.2544.1.12.24.2.1.1.12
.1.3.6.1.4.1.2544.1.12.24.2.1.1.13
.1.3.6.1.4.1.2544.1.12.24.2.1.1.14
.1.3.6.1.4.1.2544.1.12.24.2.1.1.2
.1.3.6.1.4.1.2544.1.12.24.2.1.1.3
.1.3.6.1.4.1.2544.1.12.24.2.1.1.4
.1.3.6.1.4.1.2544.1.12.24.2.1.1.5
.1.3.6.1.4.1.2544.1.12.24.2.1.1.6
.1.3.6.1.4.1.2544.1.12.24.2.1.1.7
.1.3.6.1.4.1.2544.1.12.24.2.1.1.8
.1.3.6.1.4.1.2544.1.12.24.2.1.1.9
.1.3.6.1.4.1.2544.1.12.24.3
.1.3.6.1.4.1.2544.1.12.24.3.1
.1.3.6.1.4.1.2544.1.12.24.3.2
Dependencies (14) 6 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (5)
Enumeration
noAction(1)
clearStats(2)
Enumeration
none(1)
provision(2)
noPeer(3)
request(4)
configSuccess(5)
configFail(6)
timeout(7)
Enumeration
efmOam(1)
Enumeration
client(1)
server(2)
Enumeration
notAvailable(1)
disabled(2)
associatingActive(3)
associatingPassive(4)
associated(5)
noPeer(6)
Compliance Statements (1)

OID .1.3.6.1.4.1.2544.1.12.24.3.1.1
Describes the requirements for conformance to the F3-AMP-MIB compilance.
Required groups