F3-AMP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
45
f3AmpConfigTable
table
.1.3.6.1.4.1.2544.1.12.24.1.1
·
1 row entry
·
31 columns
Uses the adva variant from
Command help
/opt/observium/mibs/adva.
Walk f3AmpConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-AMP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-AMP-MIB::f3AmpConfigTable'
A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes.
A conceptual row in the f3AmpConfigTable.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
An integer index value used to uniquely identify
this AMP Config within the System. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.1 |
||||||||||||
|
Configures AMP instance to be either Client or Server.
|
AMPRoler/w Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.2 |
||||||||||||
|
Configures protocol over which AMP message will be transported.
|
AMPProtocolr/w Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.3 |
||||||||||||
|
Enables or Disables AMP on a Port.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.4 |
||||||||||||
|
Port on which AMP Server or Client will operate. This port will
transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or c… |
SNMPv2-TCVariablePointerr/w Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3. |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.5 |
||||||||||||
|
The Status of AMP.
|
AMPStatus Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.6 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies sysName which is sent
in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName val… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.7 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies System IP address
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the … |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.8 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies System IP mask
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Sy… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.9 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies System Default Gateway
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.10 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the Syste… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.11 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies System Source IP Address
type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only … |
CM-IP-MIBIpSourceAddrType Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.12 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies System Source IP
Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSourc… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.13 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only a… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.14 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and s… |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.15 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only… |
CM-IP-MIBIpManagementTunnelTyper/w Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.16 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-o… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.17 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.18 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only … |
CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.19 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read… |
CM-COMMON-MIBVlanIdr/w Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.20 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this obje… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.21 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this ob… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.22 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.23 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.24 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.25 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-… |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.26 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object i… |
CM-IP-MIBIpManagementTunnelEncapsulationTyper/w Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.27 |
||||||||||||
|
When f3AmpConfigRole is 'server' this object specifies
MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.28 |
||||||||||||
|
This object may be used to initiate user action on this AMP Config instance.
|
AMPConfigActionr/w Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.29 |
||||||||||||
|
The type of storage configured for this entry.
|
SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.30 |
||||||||||||
|
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.31 |
f3AmpStatsTable
table.1.3.6.1.4.1.2544.1.12.24.2.1
·
1 row entry
·
14 columns
Uses the adva variant from
Command help
/opt/observium/mibs/adva.
Walk f3AmpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-AMP-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-AMP-MIB::f3AmpStatsTable'
A list of entries corresponding to Automatic Management Provisioning Statistics
A conceptual row in the f3AmpStatsTable.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The number of Provisioning Data messages sent by AMP Server.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.1 |
||||||||||||||
|
The number of Provisioning Data messages received by AMP Client.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.2 |
||||||||||||||
|
The number of Provisioning Request messages sent by AMP Client.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.3 |
||||||||||||||
|
The number of Provisioning Request received sent by AMP Server.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.4 |
||||||||||||||
|
The number of Configuration Success messages sent sent by AMP Client.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.5 |
||||||||||||||
|
The number of Configuration Success messages received by AMP Server.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.6 |
||||||||||||||
|
The number of Configuration Success messages received by AMP Client.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.7 |
||||||||||||||
|
The number of Configuration Success messages received by AMP Server.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.8 |
||||||||||||||
|
The number of Spurious messages received by AMP Client or Server
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.9 |
||||||||||||||
|
The number of messages which were not received within the time out value.
AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.10 |
||||||||||||||
|
Last received Configuration Status.
|
AMPConfigStatus Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.2.1.1.11 |
||||||||||||||
|
Time of last received Configuration Status.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.12 |
||||||||||||||
|
Last sent Configuration Status.
|
AMPConfigStatus Type Values:
|
.1.3.6.1.4.1.2544.1.12.24.2.1.1.13 |
||||||||||||||
|
Time of last sent Configuration Status.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.14 |