F10-IF-EXTENSION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
37

f10IfTable

table
.1.3.6.1.4.1.6027.3.11.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk f10IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-IF-EXTENSION-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-IF-EXTENSION-MIB::f10IfTable' 
Dell Networking OS Extension ifTable contains
generic interface parameters.
f10IfEntry row .1.3.6.1.4.1.6027.3.11.1.1.1.1
A row defintion of Dell Networking OS Interface
Extension parameters.
Indexes
Column Syntax OID
f10IfIpMtu
The IP (Internet Protocol), Maximum
Transmission Unit value.
Unsigned32r/w
Constraints:
range: 594-9252
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.1
f10IfDuplexMode
Duplex mode of the interface.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1half
2full
3auto
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.2
f10IfQueueingStrategy
Queueing strategy used for packets.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.3
f10IfRxFlowCtrl
Flow control receive. This will be read-write only for s60
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.4
f10IfTxFlowCtrl
Flow Control transmit.This will be read-only only for s60
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.5
f10IfDescr
A textual string containing information about the interface.
This will be read-write only for s60
OctetStringr/w
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.6
f10IfAdminStatus
A admin status of any interface.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.7
f10IfRateInterval
The rate info interval for the interface.
This will be read-write only for s60
Unsigned32r/w
Constraints:
range: 30-299
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.8
f10IfSpeed
The interface's current bandwidth in bits per second.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1auto
10tenMbps
100hundredMbps
1000thousandMbps
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.9
f10IfPortListBitPos
This is used for identifying the bit position in PortList Object for a given interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.10

f10IfStaticsTable

table
.1.3.6.1.4.1.6027.3.11.1.2.1 · 1 row entry · 27 columns
Open in standard view
Uses the force10 variant from /opt/observium/mibs/force10.
Command help
Walk f10IfStaticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F10-IF-EXTENSION-MIB' -M '/opt/observium/mibs/force10:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F10-IF-EXTENSION-MIB::f10IfStaticsTable' 
The statistcs information of the interfaces for performance monitoring.
f10IfStaticsEntry row .1.3.6.1.4.1.6027.3.11.1.2.1.1
A row defintion of Dell Networking OS Extension
interface statistics.
Indexes
Column Syntax OID
f10IfInVlanPkts
The total number of valid VLAN Tagged
frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.1
f10IfIn64BytePkts
The total number of frames (including bad
frames) received that were 64 octets in length
(excluding framing bits but in-cluding FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.2
f10ifIn65To127BytePkts
The total number of frames (including bad
frames) received that were between 65 and 127
octets in length inclusive (ex-cluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.3
f10IfIn128To255BytePkts
The total number of frames (including bad
frames) received that were between 128 and 255
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.4
f10IfIn256To511BytePkts
The total number of frames (including bad
frames) received that were between 256 and 511
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.5
f10IfIn512To1023BytePkts
The total number of frames (including bad
frames) received that were between 512 and 1023
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.6
f10IfInOver1023BytePkts
The total number of frames received that
were longer than 1023 (1025 Bytes in case of
VLAN Tag) octets (excluding framing bits, but
including FCS octets) and were otherwise
well formed. This counter is not incremented
…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.7
f10IfInThrottles
This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is re-ceived.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.8
f10IfInRunts
The total number of frames received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.9
f10IfInGiants
The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag)
octets (excluding framing bits, but including FCS
octets) and were otherwise well formed. This counter
is not incremented…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.10
f10IfInCRC
The total number of frames received that had
a length (ex-cluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.11
f10IfInOverruns
The total number of frames dropped because
of buffer issue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.12
f10IfOutVlanPkts
The Number of Good VLAN Tagged Frames sent
successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.13
f10IfOutUnderruns
The total number of frames dropped because
of buffer underrun.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.14
f10IfOutUnicasts
The Number of Good Unicast Frames sent successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.15
f10IfOutCollisions
A count of the frames that due to excessive
or late collisions are not transmitted successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.16
f10IfOutWredDrops
A count of the frames that are dropped using
WRED policy because of to excessive traffic.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.17
f10IfOut64BytePkts
The Number of Good Frames sent successfully
whose size was 64 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.18
f10IfOut65To127BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 65 to 127 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.19
f10IfOut128To255BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 128 to 255 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.20
f10IfOut256To511BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 256 to 511 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.21
f10IfOut512To1023BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 512 to 1023 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.22
f10IfOutOver1023BytePkts
The Number of Good Frames sent successfully
whose size was greater than 1023 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.23
f10IfOutThrottles
This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.24
f10IfLastDiscontinuityTime
The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a
discontinuity via a reset. If no such discontinuities
have occurred since the last reinitialization of
the local manage…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.25
f10IfInCentRate
This is the ingress rate in percentage.
This is an integer value which can go from 0 to 100.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.26
f10IfOutCentRate
This is the egress rate in percentage.
This is an integer value which can go from 0 to 100.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.27