EtherWAN-ewnSwitchM Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
142

ewnPortTable

table
.1.3.6.1.4.1.2736.1.1.2.2 · 1 row entry · 22 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPortTable' 
Port table
ewnPortEntry row .1.3.6.1.4.1.2736.1.1.2.2.1
Port entry
Indexes
Column Syntax OID
ewnPortNo
Port Number
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.2.2.1.1
ewnPortString
Port String
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.2736.1.1.2.2.1.2
ewnPortHardwareType
Port hardware type
Enumeration
Enumerated Values:
1type10M
2type100M
3typeMII
4type1G
5type1GFx
6type100MFX
7typeVDSL
8typeUnknown
9type10GFx
 .1.3.6.1.4.1.2736.1.1.2.2.1.3
ewnPortLinkStatus
Port Link Status
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2736.1.1.2.2.1.4
ewnPortLinkConfig
Port Administrative Link Status identical to ifAdminStatus
Enumerationr/w
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.2736.1.1.2.2.1.5
ewnPortSpeedStatus
Port Speed Status
Enumeration
Enumerated Values:
0speed10M
1speed100M
2speed1G
3speedVDSL
4speedUnknown
5speed10G
 .1.3.6.1.4.1.2736.1.1.2.2.1.6
ewnPortSpeedConfig
Port Speed Configuration
Enumerationr/w
Enumerated Values:
0speed10M
1speed100M
2speed1G
3speedAuto
4speedVDSL
5speed10G
 .1.3.6.1.4.1.2736.1.1.2.2.1.7
ewnPortDupStatus
Port Duplexity Status
Enumeration
Enumerated Values:
0half
1full
2auto
3na
 .1.3.6.1.4.1.2736.1.1.2.2.1.8
ewnPortDupConfig
Port Duplexity Configuration
Enumerationr/w
Enumerated Values:
0half
1full
2auto
3na
 .1.3.6.1.4.1.2736.1.1.2.2.1.9
ewnPortFlowStatus
Port Flow Control Status
Enumeration
Enumerated Values:
0off
1txRxOn
2txOnOnly
3rxOnOnly
 .1.3.6.1.4.1.2736.1.1.2.2.1.10
ewnPortFlowConfig
Port Flow Control Configuration
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2736.1.1.2.2.1.11
ewnPortFuncType
The operational mode of the port
Enumerationr/w
Enumerated Values:
0switchport
1routerport
 .1.3.6.1.4.1.2736.1.1.2.2.1.12
ewnPortBroadcastLimit
Switch Broadcast rate limit type.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.2.2.1.13
ewnPortDlfMulticastLimit
Switch DLF and Multicast rate limit type.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.2.2.1.15
ewnPortLimitLevel
Switch rate limit level.
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2736.1.1.2.2.1.16
ewnPortPriority
Default priority for untagged frames received by this port
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2736.1.1.2.2.1.17
ewnPortVlanMode
VLAN switch port mode.
Enumerationr/w
Enumerated Values:
1access
2hybrid
3trunk
4portbase
 .1.3.6.1.4.1.2736.1.1.2.2.1.18
ewnPortPVID
Port VLAN ID (1..4094).
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2736.1.1.2.2.1.19
ewnPortResetRMONCount
reset RMON counters on this port.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2736.1.1.2.2.1.20
ewnPortDescription
Port name
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2736.1.1.2.2.1.21
ewnPortTrafficTx
Percentage utilization of ifOutOctets. The utilization is a floating
point number with two digits after the decimal point, but represented
as a string value. For example, '100.00' indicates 100% and '0.18'
indicates …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2736.1.1.2.2.1.22
ewnPortTrafficRx
Percentage utilization of ifInOctets. The utilization is a floating
point number with two digits after the decimal point, but represented
as a string value. For example, '100.00' indicates 100% and '0.18'
indicates 0…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2736.1.1.2.2.1.23

ewnStormDetectPerPortTable

table
.1.3.6.1.4.1.2736.1.1.2.4.5 · 1 row entry · 5 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnStormDetectPerPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnStormDetectPerPortTable' 
Storm Detect Per Port Configuration
ewnStormDetectPerPortEntry row .1.3.6.1.4.1.2736.1.1.2.4.5.1
Storm Detect Per Port Table Entry
Indexes
Column Syntax OID
ewnStormDetectPort
Storm Detect Port
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.2.4.5.1.1
ewnStormDetectPortState
disabled(0) - indicates that storm detection is not enabled.
normal(1) - indicates that storm detection is enabled, but no storm event
has occurred yet.
shutdown(2) - indicates that storm detect is enabled and that the…
Enumeration
Enumerated Values:
0disabled
1normal
2shutdown
 .1.3.6.1.4.1.2736.1.1.2.4.5.1.2
ewnStormDetectThresholdUtil
The threshold, in percentage of bandwidth utilization. When
it is set to zero, the threshold is disabled. When inbound traffic of
all traffic types on this interface exceeds the threshold, a
storm event will be gene…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2736.1.1.2.4.5.1.3
ewnStormDetectTrafficType
This object identifies a particular traffice type for use in
storm detect.
Enumerationr/w
Enumerated Values:
0broadcast
1multicastBroadcast
 .1.3.6.1.4.1.2736.1.1.2.4.5.1.4
ewnStormDetectThresholdPktsPerSec
The threshold, in packets per second. When
it is set to zero, the threshold is disabled. When inbound traffic of
a particular traffic type on this interface exceeds the threshold, a
storm event will be generated.
Integer32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.2736.1.1.2.4.5.1.5

ewnPortAlarmTable

table
.1.3.6.1.4.1.2736.1.1.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPortAlarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPortAlarmTable' 
This table specifies alarm control and status information related to 
each port.
ewnPortAlarmEntry row .1.3.6.1.4.1.2736.1.1.2.5.1
Port Alarm Table Entry
Indexes
Column Syntax OID
ewnPortAlarmNo
Port Alarm Table Index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.2.5.1.1
ewnPortAlarmPortName
Name of an interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.2.5.1.2
ewnPortAlarmEnable
Individual port alarms can be enabled/disabled by this property.
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.2736.1.1.2.5.1.3
ewnPortAlarmPortStatus
The current operational state of this interface.
Enumeration
Enumerated Values:
0linkUp
1linkDown
 .1.3.6.1.4.1.2736.1.1.2.5.1.4

ewnPowerAlarmStatusTable

table deprecated
.1.3.6.1.4.1.2736.1.1.2.6 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPowerAlarmStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPowerAlarmStatusTable' 
Deprecated. It is replaced by ewnPowerSupplyTable.
ewnPowerAlarmStatusEntry row .1.3.6.1.4.1.2736.1.1.2.6.1
Power Alarm Table Entry
Indexes
Column Syntax OID
ewnPowerAlarmStatusNOdeprecated
Power Alarm Table Index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.2.6.1.1
ewnPowerAlarmStatusPowerNamedeprecated
Power Alarm Table Power Name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.2.6.1.2
ewnPowerAlarmStatusTriggerdeprecated
Power Alarm Table Trigger Enable/Disable
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.2736.1.1.2.6.1.3
ewnPowerAlarmStatusPowerStatusdeprecated
Power Alarm Table Power Status
Enumeration
Enumerated Values:
0linkUp
1linkDown
 .1.3.6.1.4.1.2736.1.1.2.6.1.4

ewnMirrorTable

table
.1.3.6.1.4.1.2736.1.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnMirrorTable' 
Port Mirroring table
ewnMirrorEntry row .1.3.6.1.4.1.2736.1.1.3.3.1
Mirror Entry
Indexes
Column Syntax OID
ewnMirrorIndex
Mirror index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.3.3.1.1
ewnMirrorToPort
Mirror to port
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2736.1.1.3.3.1.2
ewnMirrorFromPortMap
Mirror from port map
OctetStringr/w .1.3.6.1.4.1.2736.1.1.3.3.1.3
ewnMirrorMode
Mirror mode
Enumerationr/w
Enumerated Values:
1receive
2transmit
3receiveandtransmit
 .1.3.6.1.4.1.2736.1.1.3.3.1.4

ewnTrunkTable

table
.1.3.6.1.4.1.2736.1.1.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnTrunkTable' 
Port Trunking table
ewnTrunkEntry row .1.3.6.1.4.1.2736.1.1.4.2.1
Trunk Entry
Indexes
Column Syntax OID
ewnTrunkIndex
Trunk index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.4.2.1.1
ewnTrunkPortMap
Trunk port map
OctetStringr/w .1.3.6.1.4.1.2736.1.1.4.2.1.2
ewnTrunkAvailPortMap
Available trunk port map
OctetString .1.3.6.1.4.1.2736.1.1.4.2.1.3
ewnTrunkMaxNumOfPorts
Maximum number of ports per trunk group.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.4.2.1.4

ewnIGMPCfgTable

table
.1.3.6.1.4.1.2736.1.1.7.2 · 1 row entry · 7 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnIGMPCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnIGMPCfgTable' 
IGMP configuration table, an entry per VLAN
ewnIGMPCfgEntry row .1.3.6.1.4.1.2736.1.1.7.2.1
IGMP configuration entry
Indexes
Column Syntax OID
ewnIGMPCfgIndex
IGMP configuration entry index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.7.2.1.1
ewnIGMPCfgVlanID
IGMP configuration entry's VLAN ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2736.1.1.7.2.1.2
ewnIGMPCfgIGMPVersion
IGMP Version
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.2736.1.1.7.2.1.3
ewnIGMPCfgFastLeave
IGMP Fast-leave function
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.7.2.1.4
ewnIGMPCfgQueryInterval
IGMP Querrier Interval for active mode
Integer32r/w
Constraints:
range: 10-18000
 .1.3.6.1.4.1.2736.1.1.7.2.1.5
ewnIGMPCfgMaxResponseTime
IGMP Max Response Time for active mode
Integer32r/w
Constraints:
range: 1-240
 .1.3.6.1.4.1.2736.1.1.7.2.1.6
ewnIGMPCfgReportSuppression
IGMP Report Suppression function
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.7.2.1.7

ewnIGMPRecordTable

table
.1.3.6.1.4.1.2736.1.1.7.3 · 1 row entry · 6 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnIGMPRecordTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnIGMPRecordTable' 
IGMP record database table
ewnIGMPRecordEntry row .1.3.6.1.4.1.2736.1.1.7.3.1
IGMP entry
Indexes
Column Syntax OID
ewnIGMPRecordIndex
IGMP Group index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.7.3.1.1
ewnIGMPRecordGroupAddress
IGMP group address
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2736.1.1.7.3.1.2
ewnIGMPRecordInterface
IGMP group member interface
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.7.3.1.3
ewnIGMPRecordUpTime
IGMP group up time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.7.3.1.4
ewnIGMPRecordExpireTime
IGMP group expire time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.7.3.1.5
ewnIGMPRecordLastReporter
IGMP group last reporter
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2736.1.1.7.3.1.6

ewnVLANTable

table
.1.3.6.1.4.1.2736.1.1.8.2 · 1 row entry · 11 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnVLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnVLANTable' 
VLAN Settings Table
ewnVLANEntry row .1.3.6.1.4.1.2736.1.1.8.2.1
VLAN Settings Entry
Indexes
Column Syntax OID
ewnVLANIndex
VLAN index
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2736.1.1.8.2.1.1
ewnVLANID
VLAN ID (valid values 1-4094)
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2736.1.1.8.2.1.2
ewnVLANName
VLAN Name. This can only be set during creation of VLAN. It
cannot be modified in a later time.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2736.1.1.8.2.1.3
ewnVLANState
The VLAN state.
Enumeration
Enumerated Values:
0invalid
1disabled
2active
 .1.3.6.1.4.1.2736.1.1.8.2.1.4
ewnVLANType
The VLAN type.
Enumeration
Enumerated Values:
0invalid
1static
2dynamic
 .1.3.6.1.4.1.2736.1.1.8.2.1.5
ewnVLANStaticPortMap
Ports that always belong to the VLAN.
OctetStringr/w .1.3.6.1.4.1.2736.1.1.8.2.1.6
ewnVLANStaticUntaggedPortMap
Untagged ports of the VLAN.
OctetStringr/w .1.3.6.1.4.1.2736.1.1.8.2.1.7
ewnVLANCurrentPortMap
Ports currently belonging to the VLAN.
OctetString .1.3.6.1.4.1.2736.1.1.8.2.1.8
ewnVLANCurrentUntaggedPortMap
Untagged ports currently belonging to the VLAN.
OctetString .1.3.6.1.4.1.2736.1.1.8.2.1.9
ewnVLANCurrentRegisteredPortMap
Registered ports currently belonging to the VLAN.
OctetString .1.3.6.1.4.1.2736.1.1.8.2.1.10
ewnVLANIPAddress
VLAN IP address / mask
OctetStringr/w
Constraints:
range: 0-26
 .1.3.6.1.4.1.2736.1.1.8.2.1.11

ewnQoSWRRqueueTable

table
.1.3.6.1.4.1.2736.1.1.9.4 · 1 row entry · 5 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnQoSWRRqueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnQoSWRRqueueTable' 
QoS WRR queue table
ewnQoSWRRqueueEntry row .1.3.6.1.4.1.2736.1.1.9.4.1
QoS WRR queue table entry
Indexes
Column Syntax OID
ewnQoSQueueIndex
QoS Queue Index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.9.4.1.1
ewnQoSWRRqueueID
QoS WRR queue ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2736.1.1.9.4.1.2
ewnQoSWRRqueueCoSmap
QoS WRR queue CoS mapping
OctetStringr/w
Constraints:
range: 0-35
 .1.3.6.1.4.1.2736.1.1.9.4.1.3
ewnQoSWRRqueueDSCPmap
QoS WRR queue DSCP mapping
OctetStringr/w .1.3.6.1.4.1.2736.1.1.9.4.1.4
ewnQoSWRRqueueBandwidth
QoS WRR queue bandwidth
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.2736.1.1.9.4.1.5

ewnBridgeSDBTable

table
.1.3.6.1.4.1.2736.1.1.11.1 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnBridgeSDBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnBridgeSDBTable' 
Switching Database table
ewnBridgeSDBEntry row .1.3.6.1.4.1.2736.1.1.11.1.1
SDB Entry
Indexes
Column Syntax OID
ewnBridgeSDBIndex
Switching Database Index
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.11.1.1.1
ewnBridgeSDBMacAddress
Switching Database MAC address
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.2736.1.1.11.1.1.2
ewnBridgeSDBVlanId
Switching Database VLAN ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2736.1.1.11.1.1.3
ewnBridgeSDBPortNo
Switching Database port number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2736.1.1.11.1.1.4

ewnRingPortTable

table
.1.3.6.1.4.1.2736.1.1.14.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnRingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnRingPortTable' 
Table of information containing the port control and state in
the Ring.
ewnRingPortEntry row .1.3.6.1.4.1.2736.1.1.14.1.6.1
An entry in the table, containing the port control and state in
the Ring.
Indexes
Column Syntax OID
ewnRingPortIndex
This object identifies the ring(coupling) port identifier
for which this entry contains information.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.2736.1.1.14.1.6.1.1
ewnRingPortType
This object identifies the ring(coupling) port type.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.14.1.6.1.2
ewnRingPortNumber
This object identifies the ring(coupling) port number.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2736.1.1.14.1.6.1.3
ewnRingPortState
This object identifies the ring(coupling) port state.
Enumeration
Enumerated Values:
1down
2suspend
3block
4forward
 .1.3.6.1.4.1.2736.1.1.14.1.6.1.4

ewnChainPortTable

table
.1.3.6.1.4.1.2736.1.1.14.2.5 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnChainPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnChainPortTable' 
Table of information containing the port control , role and state in
the Chain.
ewnChainPortEntry row .1.3.6.1.4.1.2736.1.1.14.2.5.1
An entry in the table, containing the port control , role and state in
the Chain.
Indexes
Column Syntax OID
ewnChainPortIndex
This object identifies the port identifier
for which this entry contains information.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.14.2.5.1.1
ewnChainPort
Enable / disable the port to run chain protocol.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2736.1.1.14.2.5.1.2
ewnChainPortRole
This object identifies the chain port role.
Enumeration
Enumerated Values:
1noLink
2init
3master
4slave
5unknown
 .1.3.6.1.4.1.2736.1.1.14.2.5.1.3
ewnChainPortState
This object identifies the chain port state.
Enumeration
Enumerated Values:
1block
2forward
3unknown
 .1.3.6.1.4.1.2736.1.1.14.2.5.1.4

ewnChainPassPortTable

table
.1.3.6.1.4.1.2736.1.1.14.2.7 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnChainPassPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnChainPassPortTable' 
Table of information containing the port control, role and state in
the Chain pass-through.
ewnChainPassPortEntry row .1.3.6.1.4.1.2736.1.1.14.2.7.1
An entry in the table, containing the port control , role and state in
the Chain pass-through.
Indexes
Column Syntax OID
ewnChainPassPortIndex
This object identifies the port identifier
for which this entry contains information.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2736.1.1.14.2.7.1.1
ewnChainPassPortNum
This object identifies the chain pass-through port number.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2736.1.1.14.2.7.1.2
ewnChainPassPortRole
This object identifies the chain pass-through port role.
Enumeration
Enumerated Values:
1noLink
2init
3fowarder
4unknown
 .1.3.6.1.4.1.2736.1.1.14.2.7.1.3
ewnChainPassPortState
This object identifies the chain pass-through port state.
Enumeration
Enumerated Values:
1block
2forward
3unknown
 .1.3.6.1.4.1.2736.1.1.14.2.7.1.4

ewnVDSLCfgTable

table
.1.3.6.1.4.1.2736.1.1.16.2 · 1 row entry · 5 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnVDSLCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnVDSLCfgTable' 
VDSL configuration table
ewnVDSLCfgEntry row .1.3.6.1.4.1.2736.1.1.16.2.1
VDSL configuration Entry
Indexes
Column Syntax OID
ewnVDSLCfgIndex
VDSL configuration entry index
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2736.1.1.16.2.1.1
ewnVDSLAsymMode
VDSL asymmetric mode
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.2736.1.1.16.2.1.2
ewnVDSLMaxSpeed
VDSL maximum speed
Enumerationr/w
Enumerated Values:
0speed50Mbps
1speed40Mbps
2speed30Mbps
3speed25Mbps
4speed20Mbps
5speed15Mbps
6speed10Mbps
7speed5Mbps
8speed3Mbps
9speed1Mbps
 .1.3.6.1.4.1.2736.1.1.16.2.1.3
ewnVDSLFixedRate
VDSL fixed rate bandwidth in Mbps:
SYM means Symmetric mode and ASYM is used for Asymmetric mode
Enumerationr/w
Enumerated Values:
0sym50MAsym59M31M
1sym40MAsym52M24M
2sym30MAsym47M14M
3sym25MAsym42M8M
4sym20MAsym35M6M
5sym15MAsym28M5M
6sym10MAsym22M3M
7sym5MAsym14M2M
8sym3MAsym12M1M
9sym1MAsym1M1M
10disable
 .1.3.6.1.4.1.2736.1.1.16.2.1.4
ewnVDSLRetrain
Upgrade VDSL speed
Enumerationr/w
Enumerated Values:
0none
1retrain
 .1.3.6.1.4.1.2736.1.1.16.2.1.5

ewnVDSLStatTable

table
.1.3.6.1.4.1.2736.1.1.16.3 · 1 row entry · 7 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnVDSLStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnVDSLStatTable' 
VDSL status table
ewnVDSLStatEntry row .1.3.6.1.4.1.2736.1.1.16.3.1
VDSL status Entry
Indexes
Column Syntax OID
ewnVDSLStatIndex
VDSL status entry index
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.1
ewnVDSLLinkSpeed
VDSL link speed
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.2
ewnVDSLOperMode
VDSL operation mode
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.3
ewnVDSLSNR1BandOnLocal
SNR of the 1st received band on local side
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.4
ewnVDSLSNR2BandOnLocal
SNR of the 2nd received band on local side
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.5
ewnVDSLSNR1BandOnRemote
SNR of the 1st received band on remote side
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.6
ewnVDSLSNR2BandOnRemote
SNR of the 2nd received band on remote side
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2736.1.1.16.3.1.7

ewnVDSLStatsTable

table
.1.3.6.1.4.1.2736.1.1.16.4 · 1 row entry · 11 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnVDSLStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnVDSLStatsTable' 
VDSL statistics table
ewnVDSLStatsEntry row .1.3.6.1.4.1.2736.1.1.16.4.1
VDSL statistics Entry
Indexes
Column Syntax OID
ewnVDSLStatsIndex
VDSL statistics entry index
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2736.1.1.16.4.1.1
ewnVDSLChannelFail
VDSL Channel failures counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.2
ewnVDSLFrameLoss
VDSL Local loss of frame counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.3
ewnVDSLErrs
VDSL Number of uncorrectable code words
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.4
ewnVDSLBroadcast
VDSL Broadcast frames received counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.5
ewnVDSLRxFrame
VDSL Received frames counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.6
ewnVDSLRxPause
VDSL Reception pause packets counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.7
ewnVDSLRxBytes
VDSL Bytes received OK counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.8
ewnVDSLTxFrame
VDSL Transmitted Frames Counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.9
ewnVDSLTxPause
VDSL Transmission pause packets counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.10
ewnVDSLTxBytes
VDSL Bytes transmitted OK counter
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2736.1.1.16.4.1.11

ewnPortPoESettingTable

table
.1.3.6.1.4.1.2736.1.1.17.3 · 1 row entry · 13 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPortPoESettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPortPoESettingTable' 
Power Over Ethernet Port Setting table
ewnPoEPortSettingEntry row .1.3.6.1.4.1.2736.1.1.17.3.1
Power Over Ethernet Port entry
Indexes
Column Syntax OID
ewnPoEPortIndex
Power Over Ethernet Port Number
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2736.1.1.17.3.1.1
ewnPoEEnableMode
Power Over Ethernet Port Mode Control : Disable/Enable/Scheduling
Enumerationr/w
Enumerated Values:
0disable
1enable
2scheduling
 .1.3.6.1.4.1.2736.1.1.17.3.1.2
ewnPoEPowerLimitbyClassification
Power Limit by Classification : Disable/Enable
No Suppert : NA
Enumerationr/w
Enumerated Values:
0disable
1enable
2na
 .1.3.6.1.4.1.2736.1.1.17.3.1.3
ewnPoEPowerLimitFixed
Fixed Power Limit
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.17.3.1.4
ewnPoEPowerPriority
Power Priority : Critical/High/Low
Enumerationr/w
Enumerated Values:
0critical
1high
2low
 .1.3.6.1.4.1.2736.1.1.17.3.1.5
ewnPoEPowerDownAlarm
Power Down Alarm : Disable/Enable
Enumerationr/w
Enumerated Values:
0disable
1enable
2na
 .1.3.6.1.4.1.2736.1.1.17.3.1.6
ewnPoEPowerStatus
Power Status : Searching/Delivering Power/DC Disconnect/Over Power
Enumeration
Enumerated Values:
0searching
1deliveringPower
2dcDisconnect
3overPower
4disable
 .1.3.6.1.4.1.2736.1.1.17.3.1.7
ewnPoEPowerDeviceClass
Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their …
Enumeration
Enumerated Values:
1class0
2class1
3class2
4class3
5class4
6na
 .1.3.6.1.4.1.2736.1.1.17.3.1.8
ewnPoEPowerCurrent
Power Current : Measured usage current expressed in Milliampere.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.2736.1.1.17.3.1.9
ewnPoEPowerConsumption
Power Consumption : Measured usage power expressed in Watts.
OctetString
Constraints:
range: 0-7
 .1.3.6.1.4.1.2736.1.1.17.3.1.10
ewnPoEExtendMode
If the value of this object is enable(1), the speed of the port is
forced to set at 10Mbps so the port can deliver long range data
and power up to 250 meters (656ft).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.17.3.1.11
ewnPoEPowerDelivery
A value of twoPairs(0) indicates power is delivered over 2 pairs of RJ45
pins. A value of fourPairs(1) indicates power is delivered over 4 pairs
of RJ45 pins.
Enumerationr/w
Enumerated Values:
0twoPairs
1fourPairs
 .1.3.6.1.4.1.2736.1.1.17.3.1.12
ewnPoEForcePower
A value of enable(1) indicates no PD detection is performed. Power is
automatically injected.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.17.3.1.13

ewnPoEWatchdogConfigTable

table
.1.3.6.1.4.1.2736.1.1.17.5 · 1 row entry · 7 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPoEWatchdogConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPoEWatchdogConfigTable' 
A table displays and controls the PoE watchdog function of 
PoE-enabled ports on the switch. The switch sends periodic ping
ICMP echo request packets to monitor connected PoE devices (PD).
ewnPoEWatchdogConfigEntry row .1.3.6.1.4.1.2736.1.1.17.5.1
Each entry in this table contains PoE watchdog configuration
information for a PoE-enabled interface.
Indexes
Column Syntax OID
ewnPoEWatchdogPortIndex
The interface on which ICMP echo request packets are sent
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2736.1.1.17.5.1.1
ewnPoEWatchdogState
Disable or enable PoE watchdog function on this interface.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2736.1.1.17.5.1.2
ewnPoEWatchdogTargetAddress
IP address of the target to ping
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2736.1.1.17.5.1.3
ewnPoEWatchdogPingInterval
Specifies how often ping test will be run.
secondsInteger32r/w
Constraints:
range: 30-600
 .1.3.6.1.4.1.2736.1.1.17.5.1.4
ewnPoEWatchdogMaxFailures
Specifies the maximum number of ping failures before determining
the target is unreachable.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2736.1.1.17.5.1.5
ewnPoEWatchdogAction
Action should be done when the number of ICMP requests with no
response exceeds ewnPoEWatchdogMaxFailures.
Enumerationr/w
Enumerated Values:
0noAction
1powerCycle
2powerOff
 .1.3.6.1.4.1.2736.1.1.17.5.1.6
ewnPoEWatchdogStartupDelay
Specifies the initial time to delay before starting the PoE watchdog
at system startup.
secondsInteger32r/w
Constraints:
range: 30-600
 .1.3.6.1.4.1.2736.1.1.17.5.1.7

ewnLogServerTable

table
.1.3.6.1.4.1.2736.1.1.18.1.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnLogServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnLogServerTable' 
A table storing the settings of remote syslog servers.
ewnLogServerEntry row .1.3.6.1.4.1.2736.1.1.18.1.1.2.1
An entry describing the characteristics of a remote syslog server.
Indexes
Column Syntax OID
ewnLogServerAddress
The IP address of the SYSLOG server to which log messages are to be
sent. A value of 0.0.0.0 indicates no server address is configured.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2736.1.1.18.1.1.2.1.1
ewnLogServerRowStatus
Controls creation/deletion of entries in this table. Only
'createAndGo' and 'destroy' are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2736.1.1.18.1.1.2.1.2

ewnLogHistoryTable

table
.1.3.6.1.4.1.2736.1.1.18.1.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnLogHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnLogHistoryTable' 
A table of syslog messages generated by this device.
All 'interesting' syslog messages (i.e. severity <=
ewnLogHistTableMaxSeverity) are entered into this table.
ewnLogHistoryEntry row .1.3.6.1.4.1.2736.1.1.18.1.3.3.1
A syslog message that was previously generated by this
device. Each entry is indexed by a message index.
Indexes
Column Syntax OID
ewnLogHistIndex
A monotonically increasing integer for the sole
purpose of indexing messages. When it reaches the
maximum value the agent flushes the table and wraps
the value back to 1.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2736.1.1.18.1.3.3.1.1
ewnLogHistFacility
Name of the facility that generated this message.
For example: 'SYS'.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.2736.1.1.18.1.3.3.1.2
ewnLogHistMsgSeverity
The severity of the message.
EwnLogSeverity
Type Values:
1emergency
2alert
3critical
4error
5warning
6notice
7info
8debug
 .1.3.6.1.4.1.2736.1.1.18.1.3.3.1.3
ewnLogHistMsgText
The text of the message. If the text of the message
exceeds 160 bytes, the message will be truncated to
160 bytes and a '*' character will be appended -
indicating that the message has been truncated.
OctetString
Constraints:
range: 0-160
 .1.3.6.1.4.1.2736.1.1.18.1.3.3.1.4
ewnLogHistTimestamp
The value of sysUpTime when this message was
generated.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2736.1.1.18.1.3.3.1.5

ewnPowerSupplyTable

table
.1.3.6.1.4.1.2736.1.1.21.1 · 1 row entry · 4 columns
Open in standard view
Uses the etherwan variant from /opt/observium/mibs/etherwan.
Command help
Walk ewnPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EtherWAN-ewnSwitchM' -M '/opt/observium/mibs/etherwan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EtherWAN-ewnSwitchM::ewnPowerSupplyTable' 
A table containing information of power supply status of the device.
ewnPowerSupplyEntry row .1.3.6.1.4.1.2736.1.1.21.1.1
Entry containing status of a power supply.
Indexes
Column Syntax OID
ewnPowerSupplyIndex
Index to the ewnPowerSupplyTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2736.1.1.21.1.1.1
ewnPowerSupplyName
Name of a power supply, e.g. Power1, Power2.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2736.1.1.21.1.1.2
ewnPowerSupplyAlarmEnable
Individual power alarms can be enabled/disabled by this property.
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.2736.1.1.21.1.1.3
ewnPowerSupplyStatus
Status of a power supply.
Enumeration
Enumerated Values:
0up
1down
 .1.3.6.1.4.1.2736.1.1.21.1.1.4