Es2952-MIB Table View

A list of port entries. The number of
          
entries is given by the value of portNumber.

portEntry row .1.3.6.1.4.1.3902.15.2.11.2.4.1

A port entry containing objects at the

subnetwork layer and below for a particular

port.

Indexes

portId

Column	Syntax	OID
portId The port id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.2.4.1.1
portName Port name(maxsize:200,number 1~255 are reserved).	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.3902.15.2.11.2.4.1.2
portDescr Description of a port	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.3902.15.2.11.2.4.1.3
portAdminStatus The desired state of the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.2.4.1.4
portOperStatus The current operational state of the port.	Enumeration Enumerated Values: 1 linkUp 2 linkDown	.1.3.6.1.4.1.3902.15.2.11.2.4.1.5
portAdminWorkMode This item config port working mode.	Enumerationr/w Enumerated Values: 1 auto-10M 2 auto-100M 3 auto-1000M 4 auto-auto 5 half-10M 6 half-100M 7 half-1000M 8 half-auto 9 full-10M 10 full-100M 11 full-1000M 12 full-auto	.1.3.6.1.4.1.3902.15.2.11.2.4.1.6
portOperDuplex The actual port duplex mode	Enumeration Enumerated Values: 1 full 2 half	.1.3.6.1.4.1.3902.15.2.11.2.4.1.7
portOperSpeed The actual port speed	Enumeration Enumerated Values: 1 speed-10M 2 speed-100M 3 speed-1000M	.1.3.6.1.4.1.3902.15.2.11.2.4.1.8
portPvid Port default vlan id	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.15.2.11.2.4.1.9
portFlowControl Port's flowcontrol	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.2.4.1.10
portVlanMode Port's vlan-mode .(only valid in the pon port) . The first character means: 1 : port's vlan-mode for transparent-mode . 2 : port's vlan-mode for translation-mode . 3 : port's vlan-mode for tag-mode . when being 3,the f…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.2.4.1.11
portSecurity Port mac-address learning. PortSecurity enabled means forbid this port learning mac-address, whereas permit mac-address self-learning.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.2.4.1.12
portPriority Port's priority	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.15.2.11.2.4.1.13
portMulticast Port forward or discard multicast packet.	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.15.2.11.2.4.1.14
portMediaType Media type of the port.	Enumeration Enumerated Values: 1 mt100BaseT 2 mt100BaseFX 3 mt1000BaseX 4 mt1000BaseT 5 unKnown	.1.3.6.1.4.1.3902.15.2.11.2.4.1.15
isPortInTrunk This item indicates whether a port has been added to a trunk or not.	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.3902.15.2.11.2.4.1.16
portLoopdetectStatus Loopdetect status of the port.The first character means: 0 : port_notInTrunk_down 1 : port_notInTrunk_up_loopdetDisable 2 : port_notInTrunk_up_loopdetEnable_noLoop 3 : port_notInTrunk_up_loopdetEnable_Loop_noBlock 4 …	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.3902.15.2.11.2.4.1.17
dynamicMacMaxCount Port's sum of dynamic macaddress.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.15.2.11.2.4.1.18

A table containing static config information for 
each VLAN configured into the device by (local or 
network) management. All entries are permanent and will 
be restored after the device is reset.

vlanEntry row .1.3.6.1.4.1.3902.15.2.11.3.3.1

Each entry contains all config of a vlan.

Indexes

vlanId

Column	Syntax	OID
vlanId Vlan id	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.15.2.11.3.3.1.1
vlanUntaggedPorts Untagged ports in this vlan.	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.3.3.1.3
vlanTaggedPorts Tagged ports in this vlan.	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.3.3.1.4
vlanName Descriptive name of the vlan.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.3902.15.2.11.3.3.1.5
vlanAdminStatus The desired state of the vlan.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.3.3.1.6
vlanUntaggedTrunks Untagged trunk in the vlan	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.3.3.1.7
vlanTaggedTrunks Tagged trunks in the vlan	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.3.3.1.8

Vlan in this table means that vlan is enabled 
or has a descriptive name or contains ports/trunks.

vlanAssistantEntry row .1.3.6.1.4.1.3902.15.2.11.3.4.1

Row Description

Indexes

assVlanId

Column	Syntax	OID
assVlanId Vlan id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.3.4.1.1

Description

qosPolicerEntry row .1.3.6.1.4.1.3902.15.2.11.5.7.1

Row Description

Indexes

policerID

Column	Syntax	OID
policerID Column Description.The scope is 0-255.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.7.1.1
qosPolicerPara qosGlobalProfile setting.If 0 means the policer is not existed. The valid scope is 32-25165824,which means 32K-24Gbps.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.7.1.2
qosExceededOper no-operation means no operation on the packets; drop means drop the packets. Notice:This item is valid only after qosPolicerPara is valid.	Enumerationr/w Enumerated Values: 1 noOperation 2 drop	.1.3.6.1.4.1.3902.15.2.11.5.7.1.3
qosPolicerBurst qosGlobalProfile setting for burstSize.If 0 get,means the policer is not existed. The item can be set only after qosPolicerPara is valid. The valid scope is 2000-2147450880,which means (2000-2G)byte. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.7.1.4

Description

ipPriToTrafficEntry row .1.3.6.1.4.1.3902.15.2.11.5.8.1

Row Description

Indexes

ipPriority

Column	Syntax	OID
ipPriority Column Description	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.8.1.1
tcFePort traffic-class corresponding to ipPriority. The value is between 0 and 3.	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.3902.15.2.11.5.8.1.2
tcGePort traffic-class corresponding to ipPriority. The value is between 0 and 7.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.15.2.11.5.8.1.3

A list of port entries. The number of 
entries is given by the value of portNumber.

fePortIngBandEntry row .1.3.6.1.4.1.3902.15.2.11.5.9.1

A port entry containing objects at the
subnetwork layer and below for a particular
port.

Indexes

fePortID sessionNo

Column	Syntax	OID
fePortID The port ID.The value is devID*100+localPort. For example, 802 means devID is 8 and localPort is 2.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.9.1.1
sessionNo The session No.The scope is 0-3. 0 means broadcast suppression; 1 means multicast suppression; 2 means rate limit; 3 means user configure.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.9.1.2
sessionStatus Enable or disable the feport's ingress bandwidth session. Note??the item can be set to be enable only after feIngressRate has configed.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.5.9.1.3
feIngressRate feport's ingress bandwidth rate value(kbps). The scope is 64-100000 .	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.9.1.4
feIngressPkType The item show status of packet type . In turn means unknownmulticast(1),broadcast(2),multicast(3),unicast(4), MGMT(5),ARP(6),tcp-control(7),tcp-data(8),udp(9),non-tcpudp(10); 0 means disable,1 means enable. N…	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.5.9.1.5
quePriorityStatus The item show status of queue-priority . In turn means queues-priority 0,1,2,3; 0 means disable,1 means enable.	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.5.9.1.6
mgmtNoRatelimitStatus Enable or disable mgmtNoRatelimit	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.5.9.1.7

A list of port entries. The number of 
entries is given by the value of portNumber.

gePortIngBandEntry row .1.3.6.1.4.1.3902.15.2.11.5.10.1

A port entry containing objects at the
subnetwork layer and below for a particular
port.

Indexes

gePortID

Column	Syntax	OID
gePortID The port ID.The value is devID*100+localPort. For example, 802 means devID is 8 and localPort is 2.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.10.1.1
geIngressStatus Set geport's ingress bandwidth on or off. Note??the item can be set to be enable only after geIngressRate has configed.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.3902.15.2.11.5.10.1.2
geIngressRate The item show ingress rate for gigabit ethernet port . 2000-1000000 means valid ingress bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.5.10.1.3
geIngressPkType The item show status of packet type . In turn means unicast(1),nounicast(2),multicast(3),broadcast(4); 0 means disable,1 means enable.	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.5.10.1.4

Description

geQueScheEntry row .1.3.6.1.4.1.3902.15.2.11.5.11.1

Row Description

Indexes

gePortSessionID queueID

Column	Syntax	OID
gePortSessionID Column Description	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.11.1.1
queueID Queue ID	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.11.1.2
queueSchedule The format is X-Y. X :1,means strict priority mode,Y is not necessary; 2,means sdwrr mode and group 0; 3,means sdwrr mode and group 1. Y :queue weight,1-32. Notes: sdwrr mode must be set in series , sdwrr0 and s…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.5.11.1.3

Description

gePortIp2UserEntry row .1.3.6.1.4.1.3902.15.2.11.5.13.1

Row Description

Indexes

ipPriority

Column	Syntax	OID
userPriority For gePort,userPriority corresponding to ipPriority. The value is between 0 and 7.	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.3902.15.2.11.5.13.1.2

A list of port entries. The number of 
entries is given by the value of portNumber.

portQosParamEntry row .1.3.6.1.4.1.3902.15.2.11.5.14.1

A port entry containing objects at the
subnetwork layer and below for a particular
port.

Indexes

portID

Column	Syntax	OID
portID The port ID.The value is devID*100+localPort. For example, 802 means devID is 8 and localPort is 2.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.5.14.1.1
bandWidthEgress port's egress bandwidth restrict, The format is 0 or R-BR. 0 means clear the port's original egress bandwidth config. For fePort: R:means rate ,the scope is 64-100000 ; BR:means burstSize,0(no burstSize); For gePort: …	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.5.14.1.2
upPriorityEnable Enable or disable userPriority.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.5.14.1.3
dscpPriorityEnable Enable or disable dscpPriority	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.5.14.1.4
queScheduleMode Port's queue-schedule mode. For fePort: wrr0 means Weight0-weight1-weight2-weight3; sp means SP-SP-SP-SP; wrr1-sp means Weight0-weight1-weight2-sp; wrr2-sp means Weight0-weight1-sp-sp. For gePort: …	Enumerationr/w Enumerated Values: 0 wrr0 1 sp 2 wrr1-sp 3 wrr2-sp 4 session0 5 session1	.1.3.6.1.4.1.3902.15.2.11.5.14.1.5
remaptagToPriority Qos priority-map includes remappingtag to traffic-class. The format of this item is array of eight traffic-class values corresponding to 0-7 remappingtag. Each traffic-class vaule is between 0 and 7. For example:se…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.5.14.1.6

A list of pvlan entries. The number of 
entries is given by the value of session number.

pvlanEntry row .1.3.6.1.4.1.3902.15.2.11.6.2.1

A pvlan entry .

Indexes

sessionId

Column	Syntax	OID
sessionId The server id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.6.2.1.1
proAndIsoPortOrTrunk pvlan setting including promiscuous port(or trunk) and isolated port(or ports). The format is 0 or Px-xxxxxxxx or Tx-xxxxxxxx. if 0 means no pvlan config.Others: The first part is Px,means promiscuous port x; …	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.6.2.1.2

A table of all trunks' config.

trunkEntry row .1.3.6.1.4.1.3902.15.2.11.7.4.1

Each entry contains config of a trunk.

Indexes

trunkId

Column	Syntax	OID
trunkId Trunk id.	Unsigned32 Constraints: range: 1-7	.1.3.6.1.4.1.3902.15.2.11.7.4.1.1
trunkPvid Trunk default vlan id.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.15.2.11.7.4.1.2
trunkMulticast Trunk forward/discard multicast packet.	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.15.2.11.7.4.1.3
trunkPorts Ports in lacp link aggregation group.	PortListr/w Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.7.4.1.4
trunkMode Aggregator mode	Enumerationr/w Enumerated Values: 1 dynamic 2 static 3 mixed	.1.3.6.1.4.1.3902.15.2.11.7.4.1.5

The table of all ports' config for LACP.

lacpPortEntry row .1.3.6.1.4.1.3902.15.2.11.7.5.1

Each entry contains port config for LACP.

Indexes

lacpPortId

Column	Syntax	OID
lacpPortId The port id to index lacp config.	Integer32 Constraints: range: -2147483648-2147483647	.1.3.6.1.4.1.3902.15.2.11.7.5.1.1
lacpPortMode Port's aggregator mode in LACP	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.3902.15.2.11.7.5.1.2
lacpPortTimeout LACP aggregator timeout	Enumerationr/w Enumerated Values: 1 short 2 long	.1.3.6.1.4.1.3902.15.2.11.7.5.1.3

The layer 3 port table contains config
of all layer 3 ports of the device.

layer3PortEntry row .1.3.6.1.4.1.3902.15.2.11.8.1.1

An entry of layer 3 port config

Indexes

layer3PortId

Column	Syntax	OID
layer3PortId Layer 3 port id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.8.1.1.1
layer3PortIpAddrAndMask the format of this item is xx.xx.xx.xx/xx. Among this string, the first segment represents layer 3 ipAddress, the second segment represents net mask. eg: 192.168.2.8/24. Others 0 means delete primary ip address.	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.8.1.1.2
layer3PortMacAddr Mac address of a layer 3 port. The scope of zte mac is 00:d0:d0:f0:00:00~00:d0:d0:ff:ff:ff.	MacAddressr/w Constraints: range: 6-6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.15.2.11.8.1.1.3
layer3PortVlanId Vlan id binded to a layer 3 port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.15.2.11.8.1.1.4
layer3PortAdminStatus The desired state of the layer 3 port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.8.1.1.5

Loopback detection config and result of trunks.

loopDetectPortEntry row .1.3.6.1.4.1.3902.15.2.11.9.3.1

A port entry containing loopback detection
config and status.

Indexes

loopDetectPortId

Column	Syntax	OID
loopDetectPortId Port id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.9.3.1.1
loopDetectPortAdminStatus This item indicates whether permit loop back detection on this port or not.The first character means: 0-disable;1:enable(port based);2:enable(vlan based); The format of 0 means the port disable loopdetect in all vlans.…	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.3902.15.2.11.9.3.1.2
loopDetectPortProtectStatus Whether block this port or not while detect loopback.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.9.3.1.3
loopDetectPortLoopStatus Item value indicates whether this port is loopback.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.3902.15.2.11.9.3.1.4
loopDetectPortBlockStatus Item value indicates whether this port is blocked.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.3902.15.2.11.9.3.1.5
loopDetectPortInVlan VlanID which the port belong to when looped and blocked. 0 means default vlanID which the port is in when looped and blocked; 1-4094 means some vlanID which the port belongs to when looped and blocked…	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.3902.15.2.11.9.3.1.6

Loopback detection config and result of trunks.

loopDetectTrunkEntry row .1.3.6.1.4.1.3902.15.2.11.9.4.1

A trunk entry containing loopback detection
config and status.

Indexes

loopDetectTrunkId

Column	Syntax	OID
loopDetectTrunkId Trunk id.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.9.4.1.1
loopDetectTrunkAdminStatus This item indicates whether permit loopback detection on this trunk or not.The first character means: 0-disable;1:enable(trunk based);2:enable(vlan based); The format of 0 means the trunk disable loop…	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.3902.15.2.11.9.4.1.2
loopDetectTrunkProtectStatus Whether block this trunk or not while detect loopback.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.9.4.1.3
loopDetectTrunkLoopStatus Item value indicates whether this trunk is loopback.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.3902.15.2.11.9.4.1.4
loopDetectTrunkBlockStatus Item value indicates whether this trunk is blocked.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.3902.15.2.11.9.4.1.5
loopDetectTrunkInVlan VlanID which the trunk belong to when looped and blocked. 0 means default vlanID which the trunk is in when looped and blocked; 1-4094 means some vlanID which the trunk belongs to when looped and blo…	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.3902.15.2.11.9.4.1.6

Description vlan-translation .

vlanTranslationEntry row .1.3.6.1.4.1.3902.15.2.11.10.1.1

Description

Indexes

ingressPortId

Column	Syntax	OID
ingressPortId feport id	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.10.1.1.1
vlanTranslationEnable vlan-translation state .	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.10.1.1.2
vlanTranslationStatus This item indicates whether permit vlan-translation on this port or not. The format is INV/EGP/EGV or 0. 0 : means clear vlan-translation on the port. INV : means ingress-vlan (support vlan-list format). EGP : means e…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.10.1.1.3

The table of all ports' virtual cable test.

vctPortEntry row .1.3.6.1.4.1.3902.15.2.11.12.1.1

Each entry contains port config for VCT.

Indexes

vctPortId

Column	Syntax	OID
vctPortId The port id to index vct config.	Integer32 Constraints: range: -2147483648-2147483647	.1.3.6.1.4.1.3902.15.2.11.12.1.1.1
vctDo The value get from this item is insignificant. Setting this item will start a virtual cable test process.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.3902.15.2.11.12.1.1.2
vctIsValid This item indicates whether the port surports vct or whether the result is valid. yes2 means there are 2 pairs, yes4 means there are 4 pairs.	Enumeration Enumerated Values: 1 no 2 yes2 3 yes4	.1.3.6.1.4.1.3902.15.2.11.12.1.1.3
vctPair1Result This item indicates the cable status: open, short or impedance mismatch.	Enumeration Enumerated Values: 1 good 2 open 3 short 4 impMismatch	.1.3.6.1.4.1.3902.15.2.11.12.1.1.4
vctPair1Lenth This item indicates fault position.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.15.2.11.12.1.1.5
vctPair2Result This item indicates the cable status: open, short or impedance mismatch.	Enumeration Enumerated Values: 1 good 2 open 3 short 4 impMismatch	.1.3.6.1.4.1.3902.15.2.11.12.1.1.6
vctPair2Lenth This item indicates fault position.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.15.2.11.12.1.1.7
vctPair3Result This item indicates the cable status: open, short or impedance mismatch.	Enumeration Enumerated Values: 1 good 2 open 3 short 4 impMismatch	.1.3.6.1.4.1.3902.15.2.11.12.1.1.8
vctPair3Lenth This item indicates fault position.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.15.2.11.12.1.1.9
vctPair4Result This item indicates the cable status: open, short or impedance mismatch.	Enumeration Enumerated Values: 1 good 2 open 3 short 4 impMismatch	.1.3.6.1.4.1.3902.15.2.11.12.1.1.10
vctPair4Lenth This item indicates fault position.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.15.2.11.12.1.1.11

A list of server entries. The number of
          
entries is given by the value of serverNumber.

serverEntry row .1.3.6.1.4.1.3902.15.2.11.13.5.1

A server entry .

Indexes

serverId

Column	Syntax	OID
serverId The server id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.13.5.1.1
serverIP the format of this item is xx.xx.xx.xx. eg: 192.168.2.8. The value must be valid ipaddress.Others 0 means delete primary IP address .	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.13.5.1.2
serverName Server name valid only as serverAdminStatus is enable.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.3902.15.2.11.13.5.1.3
serverAdminStatus The desired state of syslog server.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.13.5.1.4

A table containing loginUser configuration.

userEntry row .1.3.6.1.4.1.3902.15.2.11.15.1.1

Each entry contains all config of an user.

Indexes

userName

Column	Syntax	OID
userName Community name .The character '?' is forbidded.	DisplayString Constraints: range: 0-15	.1.3.6.1.4.1.3902.15.2.11.15.1.1.1
userAttr User attribute.'1' means clear the user.	Enumerationr/w Enumerated Values: 1 clear 2 administrator 3 guest	.1.3.6.1.4.1.3902.15.2.11.15.1.1.2
loginPass Login password which attached to user.The character '?' is forbidded.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.3902.15.2.11.15.1.1.3
adminPass Admin password which attached to user.The character '?' is forbidded.	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.3902.15.2.11.15.1.1.4

A table containing snmp community configuration.

communityEntry row .1.3.6.1.4.1.3902.15.2.11.16.1.1

Each entry contains all config of a community.

Indexes

communityName

Column	Syntax	OID
communityName Community name .	DisplayString Constraints: range: 0-12	.1.3.6.1.4.1.3902.15.2.11.16.1.1.1
communityAttr Community attribute.'1' means clear the community.	Enumerationr/w Enumerated Values: 1 clear 2 public 3 private	.1.3.6.1.4.1.3902.15.2.11.16.1.1.2
viewAttached View which attached to community.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.3902.15.2.11.16.1.1.3

A table containing snmp view configuration.

viewEntry row .1.3.6.1.4.1.3902.15.2.11.16.2.1

Each entry contains all config of a view.

Indexes

viewIndex viewName

Column	Syntax	OID
viewIndex Index of the view table . The scope is 1-32 . The value get from this item is insignificant.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.16.2.1.1
viewName View name .	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.3902.15.2.11.16.2.1.2
attrAndOid View attribute and OID which attached to view. The set value is not always equal with the get value. The format is 0 or x-y or 3.x is 1,which means include, 2 which means exclude.y is the oid. such as .1.3.6. when x is …	OctetStringr/w Constraints: range: 0-150	.1.3.6.1.4.1.3902.15.2.11.16.2.1.3

A table containing snmp traphost configuration.

trapHostEntry row .1.3.6.1.4.1.3902.15.2.11.16.3.1

Each entry contains all config of a traphost.

Indexes

traphostIP traphostType commuName

Column	Syntax	OID
traphostIP Traphost IPAddress .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.15.2.11.16.3.1.1
traphostType Host type. 1: trap ; 2: inform .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.16.3.1.2
commuName SNMPv3 user name	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.3902.15.2.11.16.3.1.3
traphostVer Traphost Version. 0: clear the traphost config; 1: version 1;(only valid in the trap type). 2: version 2c; 3: version 3 using the AuthNoPriv security level; 4: version 3 using the NoAuthNoPriv security level; 5: …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.16.3.1.4

A table containing time configuration for acl .

timeAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.1.1

Each entry contains all config of basic acl.

Indexes

timeRangeName

Column	Syntax	OID
timeRangeName Timerange ID . The scope is 1-16 characters.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.3902.15.2.11.17.1.1.1
timeRange The format is Z(YYYYMMDD(?)*hh:mm-YYYYMMDD(?)*hh:mm); Z takes the following value: 0:clear the timeRange ,no word followed; 1:monday; 2:tuesday;…	OctetStringr/w Constraints: range: 0-150	.1.3.6.1.4.1.3902.15.2.11.17.1.1.2

A table containing basic acl configuration.

basicAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.2.1

Each entry contains all config of basic acl.

Indexes

basicACLNo basicRuleID

Column	Syntax	OID
basicACLNo Basic acl number . The scope is 1-99.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.2.1.1
basicRuleID RuleID in Basic acl number mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.2.1.2
ruleBasicStatus When the ruleID is cleared ,the status is disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.17.2.1.3
ruleBasicACL Basic acl config. The format is X-A.B.C.D/N-F. X is 1:deny;2:permit; 'A.B.C.D/N'is source ip and mask.If 'x' means any; F : 0 means no fragment set;1 means fragment set.	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.17.2.1.4

A table containing extended acl configuration.

extendedAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.3.1

Each entry contains all config of extended acl.

Indexes

extendedACLNo extendedRuleID

Column	Syntax	OID
extendedACLNo Extended acl number .The scope is 100-199.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.3.1.1
extendedRuleID RuleID in extended acl number mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.3.1.2
ruleExtendedStatus When the ruleID is cleared ,the status is disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.17.3.1.3
ruleExtendedProtocol Extended acl config for other protocol. The format is P:RULE. P means protocol value, P is IC,known as icmp(1) protocol, the format of RULE is X-A.B.C.D/N-A.B.C.D/N-IC-C-D-F; P is I,known as ip protocol, the format …	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.17.3.1.4

A table containing link acl configuration.

linkAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.4.1

Each entry contains all config of link acl.

Indexes

linkACLNo linkRuleID

Column	Syntax	OID
linkACLNo Link acl number .The scope is 200-299.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.4.1.1
linkRuleID RuleID in link acl number mode .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.4.1.2
ruleLinkStatus When the ruleID is cleared ,the status is disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.17.4.1.3
ruleLinkProtocol Link acl config for protocol. The format is P:RULE. P means protocol value, P is I,known as ip protocol, the format of RULE is X-C-V-M-SM-DM; P is A,known as arp protocol, the format of RULE is X-C-V-M-SM-DM; P is O,…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.17.4.1.4

A table containing hybrid acl configuration.

hybridAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.5.1

Each entry contains all config of hybrid acl.

Indexes

hybridACLNo hybridRuleID

Column	Syntax	OID
hybridACLNo Hybrid acl number .The scope is 300-399.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.5.1.1
hybridRuleID RuleID in hybrid acl number mode.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.5.1.2
ruleHybridStatus When the ruleID is cleared ,the status is disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.17.5.1.3
ruleHybridProtocol Hybrid acl config. This table does not support IPV6. The format is P:RULE. P means protocol value, P is I,known as ip protocol, the format of RULE is X-A.B.C.D/N-A.B.C.D/N-D-F-C-V-M-SM-DM; P is T,kn…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.17.5.1.4

A table containing global acl configuration.

globalAclEntry row .1.3.6.1.4.1.3902.15.2.11.17.6.1

Each entry contains all config of global acl.

Indexes

globalACLNo globalRuleID

Column	Syntax	OID
globalACLNo Global acl number(400) .	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.6.1.1
globalRuleID RuleID in global acl number mode. The scope is 1-16	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.17.6.1.2
ruleGlobalStatus When the ruleID is cleared ,the status is disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.17.6.1.3
ruleGlobalProtocol Global acl config for protocol. The format is P:RULE. P means protocol value, P is I,known as ip protocol, the format of RULE is X-PI-A.B.C.D/N-A.B.C.D/N-D-F-C-V-M-SM-DM; P is T,known as tcp(6) prot…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.17.6.1.4

A table that contains configuration and control
information for each Filtering macaddress
operating on this device.

fdbFilterEntry row .1.3.6.1.4.1.3902.15.2.11.18.2.1

Information about a specific Filtering Database.

Indexes

fdbID fdbFilterAddress

Column	Syntax	OID
fdbID The identity of this Filtering Database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.18.2.1.1
fdbFilterAddress A filter MAC address for which the device has filtering information.	MacAddress Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.15.2.11.18.2.1.2
fdbFilterType The current type for the filtering macaddress.	Enumerationr/w Enumerated Values: 1 both 2 clear	.1.3.6.1.4.1.3902.15.2.11.18.2.1.3

A table that contains configuration and control
information for each static macaddress
operating on this device.

fdbStaticPortEntry row .1.3.6.1.4.1.3902.15.2.11.18.3.1

Information about a specific Filtering Database.

Indexes

fdbID fdbStaticAddress

Column	Syntax	OID
fdbStaticAddress A filter MAC address for which the device has filtering information.	MacAddress Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.15.2.11.18.3.1.2
portBindMac The port id which binding macaddress and fid.If 0 means clear the fdb entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.18.3.1.3

A table that contains configuration and control
information for each static macaddress
operating on this device.

fdbStaticTrunkEntry row .1.3.6.1.4.1.3902.15.2.11.18.4.1

Information about a specific Filtering Database.

Indexes

fdbID fdbStaticAddress

Column	Syntax	OID
trunkBindMac The trunk id which binding macaddress and fid.If 0 means clear the fdb entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.18.4.1.3

A list of pvlan entries. The number of 
entries is given by the value of session number.

multiGroupEntry row .1.3.6.1.4.1.3902.15.2.11.20.1.1

Multicast group entry.

Indexes

number

Column	Syntax	OID
number The number of multicast group	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.20.1.1.1
vlanID Vlan id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.20.1.1.2
multiGroup Multicast group ipAddress	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.3902.15.2.11.20.1.1.3
portList ports of the muliticast group	PortList Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.20.1.1.4
trunkList trunks of the muliticast group	PortList Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents…	.1.3.6.1.4.1.3902.15.2.11.20.1.1.5

Config port's ethernet oam.

ethernetOamIfConfigEntry row .1.3.6.1.4.1.3902.15.2.11.22.5.1

Indexes

portId

Column	Syntax	OID
ethernetOamIfStatus Config port's ethernet oam enable or disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.22.5.1.2
remoteLoopbackIfStatus start or stop port remote loopback.	Enumerationr/w Enumerated Values: 1 start 2 stop	.1.3.6.1.4.1.3902.15.2.11.22.5.1.3
ifPeriodTimeoutMode set ethernet oam discovery period, link timeout and discovery mode. The format is P-T-M . P : set ethernet oam discovery period time. The scope is 1-10, default:10(100ms); T : set ethernet oam link timeout time. The sc…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.22.5.1.4
ifLinkMonitorStatus Config link monitor enable or disable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.3902.15.2.11.22.5.1.5
ifLinkSymbolPeriodThresholdWindow Config link monitor symbol-period threshold and window. The format is T-W . T : set symbol period threshold. The scope is 1-65535, default:1 ; W : set symbol period window. The scope is 1-65535,default:1(million symbols…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.22.5.1.6
ifLinkFrameThresholdWindow Config link monitor frame threshold and window . The format is T-W . T : set frame threshold.The scope is 1-65535, default:1 ; W : set frame window. The scope is 1-60,default:1(s); For example: 300-40 means: set frame …	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.22.5.1.7
ifLinkFramePeriodThresholdWindow Config link monitor frame-period threshold and window . The format is T-W . T : set frame period threshold. The scope is 1-65535, default:1 ; W : set frame period window.The scope is 1-600000, default:100(ten thousand f…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.22.5.1.8
ifLinkFrameSecondsThresholdWindow Config link monitor frame-seconds threshold and window . The format is T-W . T : set frame seconds threshold. The scope is 1-900, default:1(s) ; W : set frame seconds window.The scope is 10-900,default:60(s); For exampl…	OctetStringr/w	.1.3.6.1.4.1.3902.15.2.11.22.5.1.9

Show ethernet oam configuration information

ethernetOamShowEntry row .1.3.6.1.4.1.3902.15.2.11.22.6.1

Indexes

portId

Column	Syntax	OID
ethernetOamShowDiscovery Show ethernet oam discovery information.	OctetString	.1.3.6.1.4.1.3902.15.2.11.22.6.1.2
ethernetOamShowLinkMonitor Show ethernet oam statistics information.	OctetString	.1.3.6.1.4.1.3902.15.2.11.22.6.1.3
ethernetOamShowStatistics Show ethernet oam link monitor information.	OctetString	.1.3.6.1.4.1.3902.15.2.11.22.6.1.4

Ethnet configuration table

opticalInfoEntry row .1.3.6.1.4.1.3902.15.2.11.23.1.1

Indexes

opticalInfoPortId

Column	Syntax	OID
opticalInfoPortId The port id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.15.2.11.23.1.1.1
opticalInfoIfName Physical Ethnet interface ifName	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.2
opticalInfoOnline Optical Module Info Online	Enumeration Enumerated Values: 1 online 2 offline	.1.3.6.1.4.1.3902.15.2.11.23.1.1.3
opticalInfoSWaveLenth Optical Module Info S_waveLenth(nm)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.23.1.1.11
opticalInfoPowerSupport Optical Module Info power_supported	Enumeration Enumerated Values: 1 supported 2 unsupported	.1.3.6.1.4.1.3902.15.2.11.23.1.1.12
opticalInfoSRxPower Optical Module Info S_rxPower(mW)	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.13
opticalInfoSRxPowerValid Optical Module Info S_rxPowerValid	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.3902.15.2.11.23.1.1.14
opticalInfoSTxPower Optical Module Info S_txPower(mW)	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.15
opticalInfoSTxPowerValid Optical Module Info S_txPowerValid	Enumeration Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.3902.15.2.11.23.1.1.16
opticalInfoSTxPowerStatus Optical Module Info S_txPowerStatus	Enumeration Enumerated Values: 0 normal 1 warning 2 alarm 3 null	.1.3.6.1.4.1.3902.15.2.11.23.1.1.17
opticalInfoSRxPowerStatus Optical Module Info S_rxPowerStatus	Enumeration Enumerated Values: 0 normal 1 warning 2 alarm 3 null	.1.3.6.1.4.1.3902.15.2.11.23.1.1.18
opticalInfoVName Optical Module Info VName	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.23
opticalInfoType Optical Module Info type	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.24
opticalInfoVSn Optical Module Info VSn	DisplayString Constraints: range: 0-32	.1.3.6.1.4.1.3902.15.2.11.23.1.1.26
opticalInfoDistanse Optical Module Info Distance(m)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.15.2.11.23.1.1.27
opticalInfoMode The mode of the optical fiber.	Enumeration Enumerated Values: 0 null 1 single 2 multi 3 copper	.1.3.6.1.4.1.3902.15.2.11.23.1.1.28