EXTREME-SERVICES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
24

extremeRemoteSyslogServerTable

table
.1.3.6.1.4.1.1916.1.26.1.1 · 1 row entry · 6 columns
Open in standard view 
This table is used to configure remote syslog 
servers and contains information on the same.
extremeRemoteSyslogServerEntry entry .1.3.6.1.4.1.1916.1.26.1.1.1
An entry in the extremeRemoteSyslogServerTable.
Indexes
extremeRemoteSyslogServerAddressType extremeRemoteSyslogServerAddress extremeRemoteSyslogServerPort extremeRemoteSyslogServerFacility
Column Syntax OID
extremeRemoteSyslogServerAddressType
The type of address specified in the object
'extremeRemoteSyslogServerAddress'.
Currently, only 'ipv4' and 'dns' are supported.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.26.1.1.1.1
extremeRemoteSyslogServerAddress
The address of the remote syslog server. This
can be a DNS name or an IPv4 address.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.1916.1.26.1.1.1.2
extremeRemoteSyslogServerPort
The UDP port number of the remote syslog server
to which syslog messages will
be sent.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1916.1.26.1.1.1.3
extremeRemoteSyslogServerFacility
The facility which will be sent in all syslog
messages to this remote syslog server.
Enumeration
Enumerated Values:
1local0
2local1
3local2
4local3
5local4
6local5
7local6
8local7
 .1.3.6.1.4.1.1916.1.26.1.1.1.4
extremeRemoteSyslogServerSeverity
The syslog message severity. All syslog messages of the specified severity for
which the Bits are set, will be sent to this syslog server. When setting this object
in a 'createAndGo' request, all lower bits upto and inc…
Bitsr/w
Enumerated Values:
0critical
1error
2warning
3notice
4info
5debugSummary
6debugVerbose
7debugData
 .1.3.6.1.4.1.1916.1.26.1.1.1.5
extremeRemoteSyslogServerStatus
The status of the Row as per standard row
status conventions. Only 'createAndGo', 'active' and
'destroy' will be supported. It is not possible
to change the values of the objects of a row
once it has been c…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1916.1.26.1.1.1.6

extremeDNSServerTable

table
.1.3.6.1.4.1.1916.1.26.3.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to configure DNS servers. There can be at most two
rows in this table.
extremeDNSServerEntry entry .1.3.6.1.4.1.1916.1.26.3.1.1
An entry in the extremeDNSServerTable.
Indexes
extremeDNSServerAddressIndex
Column Syntax OID
extremeDNSServerAddressIndex
This is an integer index. Only 1 and 2 are supported for this
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.1916.1.26.3.1.1.1
extremeDNSServerAddressType
The address type of the DNS server. This can be a DNS name or
an IPv4 address.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.26.3.1.1.2
extremeDNSServerAddress
The address of the DNS server. This can be a DNS name or
an IPv4 address.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.1916.1.26.3.1.1.3

extremeAuthServerEnableTable

table
.1.3.6.1.4.1.1916.1.26.4.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to enable/disable Auth servers
extremeAuthServerEnableEntry entry .1.3.6.1.4.1.1916.1.26.4.1.1
An entry in the extremeAuthServerEnableTable.
Indexes
extremeAuthServerEnableServerType extremeAuthServerEnableAccessType
Column Syntax OID
extremeAuthServerEnableServerType
Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
AuthServerType
Textual Convention: AuthServerType Enumeration
Type Values:
1radius
2radius-acct
3tacacs
4tacacs-acct
 .1.3.6.1.4.1.1916.1.26.4.1.1.1
extremeAuthServerEnableAccessType
Specifies whether this server is for management access or netlogin access.
AuthServerAccessType
Textual Convention: AuthServerAccessType Enumeration
Type Values:
1mgmt-access
2netlogin
 .1.3.6.1.4.1.1916.1.26.4.1.1.2
extremeAuthServerEnable
Enable/Disable the Radius/tacas Server
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.26.4.1.1.3

extremeAuthServerTable

table
.1.3.6.1.4.1.1916.1.26.4.2 · 1 row entry · 12 columns
Open in standard view 
This table is used to configure radius/tacacs servers.
extremeAuthServerEntry entry .1.3.6.1.4.1.1916.1.26.4.2.1
An entry in the extremeAuthServerTable.
Indexes
extremeAuthServerIndex
Column Syntax OID
extremeAuthServerIndex
Integer index of the server.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.1916.1.26.4.2.1.1
extremeAuthServerAddressType
Type IP address of the radius/tacas server.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.26.4.2.1.2
extremeAuthServerAddress
IP address of the radius/tacas server.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1916.1.26.4.2.1.3
extremeAuthServerClientAddressType
Type of IP address to use as the SRC address when
contacting the the radius/tacas server. The radius/tacas server
should be configured with this address as one of its
clients. The switch should have a VLAN with this IP
…
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.26.4.2.1.4
extremeAuthServerClientAddress
IP address to use as the SRC address when contacting the
the radius/tacas server. The radius/tacas server should be
configured with this address as one of its clients. The
switch should have a VLAN with this IP address.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1916.1.26.4.2.1.5
extremeAuthServerPort
Port number of the radius/tacas server.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.26.4.2.1.6
extremeAuthServerSecret
This is the shared secret between the Authenticator
and radius/tacas server. This is logically write-only.
OctetStringr/w .1.3.6.1.4.1.1916.1.26.4.2.1.7
extremeAuthServerReTransmit
This is the timeout in seconds after which the
Authenticator will re transmit requests to the
radius/tacas server.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1916.1.26.4.2.1.8
extremeAuthServerType
Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server
AuthServerTyper/w
Textual Convention: AuthServerType Enumeration
Type Values:
1radius
2radius-acct
3tacacs
4tacacs-acct
 .1.3.6.1.4.1.1916.1.26.4.2.1.9
extremeAuthServerIsPrimary
Specifies whether this is the primary or the
secondary server. Is TRUE if the server is primary.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1916.1.26.4.2.1.10
extremeAuthServerAccessType
Specifies whether this server is for management access or netlogin access
AuthServerAccessTyper/w
Textual Convention: AuthServerAccessType Enumeration
Type Values:
1mgmt-access
2netlogin
 .1.3.6.1.4.1.1916.1.26.4.2.1.11
extremeAuthServerStatus
The status of the Row as per standard row
status conventions. Only 'createAndGo', 'active' and
'destroy' will be supported. It is not possible
to change the values of the objects of a row
once it has been c…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1916.1.26.4.2.1.12