EXTREME-PBQOS-MIB Table View

Table of QoS policy rules. Entries that duplicate the exact
same set of policy conditions are not allowed.

extremeQosRuleEntry row .1.3.6.1.4.1.1916.1.7.2.1

Entry in table of QoS policy rules

Indexes

extremeQosRuleIndex

Column	Syntax	OID
extremeQosRuleIndex An index into the table of QoS policy pattern rules. The index for a manager to use for creating new rows is determined by reading the value of extremeNextAvailableQosRuleIndex.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.7.2.1.1
extremeQosRuleScope The scope of conditions in which this rule applies. The value 'signaled' means that the policy rule is applied only to QoS signaling messages e.g. RSVP. The value 'inband' means that the policy rule is applied only to d…	Enumerationr/w Enumerated Values: 1 any 2 signaled 3 inband	.1.3.6.1.4.1.1916.1.7.2.1.2
extremeQosRuleDirection The direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction specified by the classification pattern. The value 'backward' means that the rule is applied …	Enumerationr/w Enumerated Values: 1 any 2 forward 3 backward	.1.3.6.1.4.1.1916.1.7.2.1.3
extremeQosRuleInPort The ifIndex value of the physical switch input port for which this rule applies. Rules that indicate an individual value for this object have a lower precedence in ExtremeWare than rules that specify IP patterns. Conve…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.7.2.1.4
extremeQosRuleInPortMask The list of physical switch input ports which further qualifies an IP flow. This object is an octet string with the MSB of octet 0 indicating port 0 and LSB indicating port 7. Similarly, the MSB of octet 1 indicates por…	EXTREME-BASE-MIBPortListr/w	.1.3.6.1.4.1.1916.1.7.2.1.5
extremeQosRuleDestAddrStart The start of the destination IP address range for which this rule applies.If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input por…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.7.2.1.6
extremeQosRuleDestAddrEnd The end of the destination IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.7.2.1.7
extremeQosRuleSrcAddrStart The start of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.7.2.1.8
extremeQosRuleSrcAddrEnd The end of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, a …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1916.1.7.2.1.9
extremeQosRuleProtocol The IP protocol number for which this rule applies. If this object has any value other than 'any' then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming i…	Enumerationr/w Enumerated Values: 1 any 2 udp 3 tcp 4 other 5 tcpPermitEstablished 6 icmp	.1.3.6.1.4.1.1916.1.7.2.1.10
extremeQosRuleDestL4PortStart The destination starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0…	EXTREME-BASE-MIBL4Portr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1916.1.7.2.1.11
extremeQosRuleSourceL4PortStart The source starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0 then…	EXTREME-BASE-MIBL4Portr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1916.1.7.2.1.12
extremeQosRuleTosMaskdeprecated A mask for the incoming IP Type-of-Service field to be applied when matching. The value of 0 means that any incoming IP ToS field is ignored. Only the default value is supported in ExtremeWare 6.0.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.1916.1.7.2.1.13
extremeQosRuleTosMatchdeprecated If the value of the incoming IP Type-of-Service field, after applying a mask of extremeQosRuleTosMask, is this value then this rule is applied. Only the default value is supported in ExtremeWare 6.0.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.1916.1.7.2.1.14
extremeQosRuleQosProfileIndex A pointer into the extremeQosProfileTable indicating the QoS treatment and actions to be applied to traffic matching this rule. A value of 0 means that this traffic will be dropped/discarded. The default value is that …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.7.2.1.15
extremeQosRuleOwner Indicates the identity of the manager that configured this entry.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1916.1.7.2.1.16
extremeQosRuleRowStatus The row status for this QoS rule. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1916.1.7.2.1.17
extremeQosRuleDestL4PortEnd The destination last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any va…	EXTREME-BASE-MIBL4Portr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1916.1.7.2.1.18
extremeQosRuleSourceL4PortEnd The source last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value o…	EXTREME-BASE-MIBL4Portr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.1916.1.7.2.1.19
extremeQosRulePrecedence The precedence used to select one rule over potentially multiple rules that might match an L3/L4 flow. The rule with highest precedence takes precedence over any rule that specifies a matching flow, individual physica…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1916.1.7.2.1.20
extremeQosRuleCounter	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1916.1.7.2.1.21
extremeQosRuleName A unique Qos rule name. If this is not specified then the system generates one automatically.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1916.1.7.2.1.22

Table of per-port QoS policy capabilities. An entry only
exists in this table for ifTable entries representing
physical ports. On a modular system with mixed capability
silicon it is necessary to indicate the QoS capabilities to
a manager.

extremeQosCapabilitiesEntry row .1.3.6.1.4.1.1916.1.7.3.1

Entry in table of QoS policy capabilities for a given switch
port.

Indexes

No indexes recorded

Column	Syntax	OID
extremeQosCapMarkIpTosCapable This port is capable of supporting policies that involve the changing of IP TOS octet values.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.7.3.1.1
extremeQosCapMatchIpTosCapable This port is capable of supporting policies that involve packet classification based on matching of IP TOS octet values.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1916.1.7.3.1.2