EXTREME-IETF-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
61

extremeBfdSessTable

table
.1.3.6.1.4.1.1916.1.43.2.1.2 · 1 row entry · 36 columns
Open in standard view
Uses the extreme variant from /opt/observium/mibs/extreme.
Command help
Walk extremeBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-IETF-BFD-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-IETF-BFD-MIB::extremeBfdSessTable' 
The BFD Session Table describes the BFD sessions.
extremeBfdSessEntry row .1.3.6.1.4.1.1916.1.43.2.1.2.1
The BFD Session Entry describes BFD session.
Indexes
Column Syntax OID
extremeBfdSessIndex
This object contains an index used to represent a
unique BFD session on this device.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessIndexTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.1
extremeBfdSessVersionNumber
The version number of the BFD protocol that this session
is running in. Write access is available for this object
to provide ability to set desired version for this
BFD session.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.2
extremeBfdSessType
This object specifies the type of this BFD session.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessTypeTCr/w
Type Values:
1singleHop
2multiHopTotallyArbitraryPaths
3multiHopOutOfBandSignaling
4multiHopUnidirectionalLinks
5multiPointHead
6multiPointTail
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.3
extremeBfdSessDiscriminator
This object specifies the local discriminator for this BFD
session, used to uniquely identify it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.4
extremeBfdSessRemoteDiscr
This object specifies the session discriminator chosen
by the remote system for this BFD session. The value may
be zero(0) if the remote discriminator is not yet known
or if the session is in the down or adminDown(1) s…
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.5
extremeBfdSessDestinationUdpPort
This object specifies the destination UDP port number
used for this BFD session's control packets. The value
may be zero(0) if the session is in adminDown(1) state.
EXTREME-IETF-BFD-TC-MIBExtremeBfdCtrlDestPortNumberTCr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.6
extremeBfdSessSourceUdpPort
This object specifies the source UDP port number used
for this BFD session's control packets. The value may be
zero(0) if the session is in adminDown(1) state. Upon
creation of a new BFD session via this MIB, the value …
EXTREME-IETF-BFD-TC-MIBExtremeBfdCtrlSourcePortNumberTCr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.7
extremeBfdSessEchoSourceUdpPort
This object specifies the source UDP port number used for
this BFD session's echo packets. The value may be zero(0)
if the session is not running in the echo mode, or the
session is in adminDown(1) state. Upon creation …
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.8
extremeBfdSessAdminStatus
A transition from 'stop' to 'start' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'start' to 'stop' will cause
the BFD sesssion to be brought d…
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.9
extremeBfdSessState
BFD session state.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessStateTC
Type Values:
1adminDown
2down
3init
4up
5failing
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.10
extremeBfdSessRemoteHeardFlag
This object specifies status of BFD packet reception from
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(2) if the…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.11
extremeBfdSessDiag
A diagnostic code specifying the local system's reason
for the last transition of the session from up(4)
to some other state.
EXTREME-IETF-BFD-TC-MIBExtremeBfdDiagTC
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.12
extremeBfdSessOperMode
This object specifies current operating mode that BFD
session is operating in.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessOperModeTCr/w
Type Values:
1asyncModeWEchoFunction
2asynchModeWOEchoFunction
3demandModeWEchoFunction
4demandModeWOEchoFunction
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.13
extremeBfdSessDemandModeDesiredFlag
This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.14
extremeBfdSessControlPlaneIndepFlag
This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the co…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.15
extremeBfdSessMultipointFlag
This object indicates the Multipoint (M) bit for this
session. It is set to true(1) if Multipoint (M) bit is
set to 1. Otherwise, the value is set to false(2)
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.16
extremeBfdSessInterface
This object contains an interface index used to indicate
the interface which this BFD session is running on. This
value can be zero if there is no interface associated
with this BFD session.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.17
extremeBfdSessSrcAddrType
This object specifies IP address type of the source IP
address of this BFD session. Only values unknown(0),
ipv4(1), ipv6(2), or ipv6z(4) have to be supported.
The value of unknown(0) is allowed only when the session
is…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.18
extremeBfdSessSrcAddr
This object specifies the source IP address of this BFD
session.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.19
extremeBfdSessDstAddrType
This object specifies IP address type of the neighboring IP
address which is being monitored with this BFD session.
Only values unknown(0), ipv4(1), ipv6(2), or ipv6z(4)
have to be supported. The value of unknown(0) is …
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.20
extremeBfdSessDstAddr
This object specifies the neighboring IP address which is
being monitored with this BFD session.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.21
extremeBfdSessGTSM
Setting the value of this object to true(1) will enable GTSM
protection of the BFD session. GTSM MUST be enabled on a
singleHop(1) session if no authentication is in use.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.22
extremeBfdSessGTSMTTL
This object is valid only when extremeBfdSessGTSM protection is
enabled on the system. This object specifies the minimum
allowed TTL for received BFD control packets. For
singleHop(1) session, if GTSM protection is enab…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.23
extremeBfdSessDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used.
EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.24
extremeBfdSessReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) can be specified when the transmitting system
does not w…
EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.25
extremeBfdSessReqMinEchoRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting. Value must be zero(0) if
this is a multihop BFD session.
EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTCr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.26
extremeBfdSessDetectMult
This object specifies the Detect time multiplier.
EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTCr/w
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.27
extremeBfdSessNegotiatedInterval
This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD Control packets.
EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.28
extremeBfdSessNegotiatedEchoInterval
This object specifies the negotiated interval, in
microseconds, that the local system is transmitting
BFD echo packets. Value is expected to be zero if
the sessions is not running in echo mode.
EXTREME-IETF-BFD-TC-MIBExtremeBfdIntervalTC
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.29
extremeBfdSessNegotiatedDetectMult
This object specifies the Detect time multiplier.
EXTREME-IETF-BFD-TC-MIBExtremeBfdMultiplierTC
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.30
extremeBfdSessAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.31
extremeBfdSessAuthenticationType
The Authentication Type used for this BFD session.
This field is valid only when the Authentication
Present bit is set. Max-access to this object as well as
other authentication related objects are set to
read-create in…
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessAuthenticationTypeTCr/w
Type Values:
-1noAuthentication
0reserved
1simplePassword
2keyedMD5
3meticulousKeyedMD5
4keyedSHA1
5meticulousKeyedSHA1
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.32
extremeBfdSessAuthenticationKeyID
The authentication key ID in use for this session. This
object permits multiple keys to be active simultaneously.
When extremeBfdSessAuthPresFlag is false(2), then the value
of this object MUST be -1. The value -1 ind…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.33
extremeBfdSessAuthenticationKey
The authentication key. When the
extremeBfdSessAuthenticationType is simplePassword(1), the value
of this object is the password present in the BFD packets.

When the extremeBfdSessAuthentication type is …
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessionAuthenticationKeyTCr/w
Type Constraints:
range: 0..252
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.34
extremeBfdSessStorageType
This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.35
extremeBfdSessRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
extremeBfdSessRowStatus and extrem…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1916.1.43.2.1.2.1.36

extremeBfdSessPerfTable

table
.1.3.6.1.4.1.1916.1.43.2.1.3 · 1 row entry · 19 columns
Open in standard view
Uses the extreme variant from /opt/observium/mibs/extreme.
Command help
Walk extremeBfdSessPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-IETF-BFD-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-IETF-BFD-MIB::extremeBfdSessPerfTable' 
This table specifies BFD Session performance counters.
extremeBfdSessPerfEntry row .1.3.6.1.4.1.1916.1.43.2.1.3.1
An entry in this table is created by a BFD-enabled node
for every BFD Session. extremeBfdSessPerfDiscTime is used to
indicate potential discontinuity for all counter objects
in this table.
Indexes
No indexes recorded
Column Syntax OID
extremeBfdSessPerfCtrlPktIn
The total number of BFD control messages received for this
BFD session.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfCtrlPktInHC if supported, and MUST do so
with the rules spell…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.1
extremeBfdSessPerfCtrlPktOut
The total number of BFD control messages sent for this BFD
session.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfCtrlPktOutHC if supported, and MUST do so
with the rules spelled…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.2
extremeBfdSessPerfCtrlPktDrop
The total number of BFD control messages received for this
session yet dropped for being invalid.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfCtrlPktDropHC if supported, and MU…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.3
extremeBfdSessPerfCtrlPktDropLastTime
The value of sysUpTime on the most recent occasion at
which received BFD control message for this session was
dropped. If no such up event exists, this object contains
a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.4
extremeBfdSessPerfEchoPktIn
The total number of BFD echo messages received for this
BFD session.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfEchoPktInHC if supported, and MUST do so
with the rules spelled…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.5
extremeBfdSessPerfEchoPktOut
The total number of BFD echo messages sent for this BFD
session.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfEchoPktOutHC if supported, and MUST do so
with the rules spelled ou…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.6
extremeBfdSessPerfEchoPktDrop
The total number of BFD echo messages received for this
session yet dropped for being invalid.

It MUST be equal to the least significant 32 bits of
extremeBfdSessPerfEchoPktDropHC if supported, and MUST …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.7
extremeBfdSessPerfEchoPktDropLastTime
The value of sysUpTime on the most recent occasion at
which received BFD echo message for this session was
dropped. If no such up event exists, this object contains
a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.8
extremeBfdSessUpTime
The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.9
extremeBfdSessPerfLastSessDownTime
The value of sysUpTime on the most recent occasion at
which the last time communication was lost with the
neighbor. If no such down event exist this object
contains a zero value.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.10
extremeBfdSessPerfLastCommLostDiag
The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value.
EXTREME-IETF-BFD-TC-MIBExtremeBfdDiagTC
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.11
extremeBfdSessPerfSessUpCount
The number of times this session has gone into the Up
state since the system last rebooted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.12
extremeBfdSessPerfDiscTime
The value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.

The relevant counters are the specific instances associated
with this BFD sess…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.13
extremeBfdSessPerfCtrlPktInHC
This value represents the total number of BFD control
messages received for this BFD session.

The least significant 32 bits MUST equal to
extremeBfdSessPerfCtrlPktIn, and MUST do so with
the rules spelle…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.14
extremeBfdSessPerfCtrlPktOutHC
This value represents the total number of BFD control
messages transmitted for this BFD session.
The least significant 32 bits MUST equal to
extremeBfdSessPerfCtrlPktOut, and MUST do so with
the rules spelled out in RFC…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.15
extremeBfdSessPerfCtrlPktDropHC
This value represents the total number of BFD control
messages received for this BFD session yet dropped for
being invalid.

The least significant 32 bits MUST equal to
extremeBfdSessPerfCtrlPktDrop, and M…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.16
extremeBfdSessPerfEchoPktInHC
This value represents the total number of BFD echo
messages received for this BFD session.

The least significant 32 bits MUST equal to
extremeBfdSessPerfEchoPktIn, and MUST do so with
the rules spelled ou…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.17
extremeBfdSessPerfEchoPktOutHC
This value represents the total number of BFD echo
messages transmitted for this BFD session.
The least significant 32 bits MUST equal to
extremeBfdSessPerfEchoPktOut, and MUST do so with
the rules spelled out in RFC 28…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.18
extremeBfdSessPerfEchoPktDropHC
This value represents the total number of BFD echo
messages received for this BFD session yet dropped
for being invalid.
The least significant 32 bits MUST equal to
extremeBfdSessPerfEchoPktDrop, and MUST do so with
the…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1916.1.43.2.1.3.1.19

extremeBfdSessDiscMapTable

table
.1.3.6.1.4.1.1916.1.43.2.1.4 · 1 row entry · 3 columns
Open in standard view
Uses the extreme variant from /opt/observium/mibs/extreme.
Command help
Walk extremeBfdSessDiscMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-IETF-BFD-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-IETF-BFD-MIB::extremeBfdSessDiscMapTable' 
The BFD Session Discriminator Mapping Table maps a
local discriminator value to associated BFD session's
ExtremeBfdSessIndexTC used in the extremeBfdSessionTable.
extremeBfdSessDiscMapEntry row .1.3.6.1.4.1.1916.1.43.2.1.4.1
The BFD Session Discriminator Map Entry describes
BFD session that is mapped to this ExtremeBfdSessIndexTC.
Indexes
Column Syntax OID
extremeBfdSessDiscMapIndex
This object specifies the ExtremeBfdSessIndexTC referred to by
the indices of this row. In essence, a mapping is
provided between these indexes and the extremeBfdSessTable.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessIndexTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.4.1.1
extremeBfdSessDiscMapStorageType
This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.1916.1.43.2.1.4.1.2
extremeBfdSessDiscMapRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
extremeBfdSessDiscMapRowStatus and…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1916.1.43.2.1.4.1.3

extremeBfdSessIpMapTable

table
.1.3.6.1.4.1.1916.1.43.2.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the extreme variant from /opt/observium/mibs/extreme.
Command help
Walk extremeBfdSessIpMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-IETF-BFD-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-IETF-BFD-MIB::extremeBfdSessIpMapTable' 
The BFD Session IP Mapping Table maps given
extremeBfdSessInterface, extremeBfdSessSrcAddrType, extremeBfdSessSrcAddr,
extremeBfdSessDstAddrType and extremeBfdSessDstAddr to an associated 
BFD session's ExtremeBfdSessIndexTC used in
the extremeBfdSessionTable.
extremeBfdSessIpMapEntry row .1.3.6.1.4.1.1916.1.43.2.1.5.1
The BFD Session IP Map Entry describes
BFD session that is mapped to this ExtremeBfdSessIndexTC.
Indexes
Column Syntax OID
extremeBfdSessIpMapIndex
This object specifies the ExtremeBfdSessIndexTC referred to by
the indexes of this row. In essence, a mapping is
provided between these indexes and the extremeBfdSessTable.
EXTREME-IETF-BFD-TC-MIBExtremeBfdSessIndexTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.1916.1.43.2.1.5.1.1
extremeBfdSessIpMapStorageType
This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.1916.1.43.2.1.5.1.2
extremeBfdSessIpMapRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
extremeBfdSessIpMapRowStatus and e…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1916.1.43.2.1.5.1.3