EXTREME-CFM-MIB Table View

This object contains an unused value for extremeCfmGroupIndex in
the extremeCfmGroupTable, or a zero to indicate that none exist.

extremeCfmGroupNextIndexEntry row .1.3.6.1.4.1.1916.1.47.1.1.1.1

The conceptual row of extremeCfmGroupNextIndexTable.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier

Column	Syntax	OID
extremeCfmGroupNextIndex Value to be used as the index of the Group table entries, for this Maintenance association End Point Identifier when the management entity wants to create a new row in that table.	IEEE8021-CFM-MIBDot1afCfmIndexIntegerNextFree Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1916.1.47.1.1.1.1.1

This table includes configuration objects and operations for the 
Group function, mainly used by the registered clients like ERPS,EAPS 
to know link detection failure through CFM.
          
Each row in the table represents a Group for the defined MEP. This 
table uses four indices. The first three indices are the indices of 
the Maintenance Domain, MaNet, and MEP tables. The fourth index is the 
specific Group on the selected MEP. A Group is created on an existing MEP 
using extremeCfmGroupIndex in the row creation.
          
Only few objects are writable in this table. 
          
The writable objects in this table need to be persistent upon reboot 
or restart of a device.

extremeCfmGroupEntry row .1.3.6.1.4.1.1916.1.47.1.1.2.1

The conceptual row of extremeCfmGroupTable.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier extremeCfmGroupIndex

Column	Syntax	OID
extremeCfmGroupIndex An index to the CFM Groups configuration table which indicates the specific group associated with a MEP. extremeCfmGroupTableNextIndex needs to be inspected to find an available index for row-creation. …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.1916.1.47.1.1.2.1.1
extremeCfmGroupName The name of a CFM group. Group name can have alpha-numeric, '-' and '_'. It should start with alphabet.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.1916.1.47.1.1.2.1.2
extremeCfmGroupStatus Whether the group is operational or not. The status is set based on associated MEP status and is informed to registered clients. It is set to 'Up' when the group is operational. It is set to 'Down' when …	ExtremeCfmGroupOperStatus Type Values: 1 down 2 up	.1.3.6.1.4.1.1916.1.47.1.1.2.1.3
extremeCfmMepIfIndex This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP and hence the group is attached. Upon a restart of the sys…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.1916.1.47.1.1.2.1.4
extremeCfmGroupRemoteMEPs Lists the Remote MEPs associated with a group. Not all Remote MEPs of an MA may be associated with a group.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.1916.1.47.1.1.2.1.5
extremeCfmGroupClients Lists all the registered clients with a group. The clients are informed with link failure or recovery through group status notifications.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.1916.1.47.1.1.2.1.6
extremeCfmGroupRowStatus The status of the row. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1916.1.47.1.1.2.1.7

The group Remote MEP Database. A database, maintained by every group, that
maintains information about other MEPs in that group.

extremeCfmGroupMepDbEntry row .1.3.6.1.4.1.1916.1.47.1.1.3.1

The Group Remote MEP Database table entry.

Indexes

IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier extremeCfmGroupIndex extremeCfmGroupMepDbRMepId

Column	Syntax	OID
extremeCfmGroupMepDbRMepId Maintenance association End Point Identifier of a remote MEP whose information from the group MEP Database is to be returned.	IEEE8021-CFM-MIBDot1agCfmMepId Type Constraints: range: 1..8191	.1.3.6.1.4.1.1916.1.47.1.1.3.1.1
extremeCfmGroupMepDbRowStatus The status of the row. All columns must have a valid value before a row can be activated.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1916.1.47.1.1.3.1.2