EXTREME-CFM-MIB

        Connectivity Fault Management Extreme Objects MIB.
This is an extension to IEEE8021-CFM-MIB for all 
extreme specific CFM objects.    
    
Source file
EXTREME-CFM-MIB
Last revised
Identity
extremeCfm
Base OID
1.3.6.1.4.1.1916.1.47
Imported Objects
EXTREME-BASE-MIB extremeAgent
IEEE8021-CFM-MIB Dot1afCfmIndexIntegerNextFree dot1agCfmMaIndex dot1agCfmMdIndex Dot1agCfmMepId dot1agCfmMepIdentifier
IF-MIB InterfaceIndexOrZero
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the extreme MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'EXTREME-CFM-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'EXTREME-CFM-MIB::extremeCfm'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EXTREME-CFM-MIB' -M '/opt/observium/mibs/extreme:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EXTREME-CFM-MIB::extremeCfm'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (23)
.1.3.6.1.4.1.1916.1.47
.1.3.6.1.4.1.1916.1.47.0
.1.3.6.1.4.1.1916.1.47.1
.1.3.6.1.4.1.1916.1.47.1.1
.1.3.6.1.4.1.1916.1.47.1.1.1
.1.3.6.1.4.1.1916.1.47.1.1.1.1
.1.3.6.1.4.1.1916.1.47.1.1.1.1.1
.1.3.6.1.4.1.1916.1.47.1.1.2
.1.3.6.1.4.1.1916.1.47.1.1.2.1
Unsigned32
.1.3.6.1.4.1.1916.1.47.1.1.2.1.1
OctetString
.1.3.6.1.4.1.1916.1.47.1.1.2.1.2
.1.3.6.1.4.1.1916.1.47.1.1.2.1.3
.1.3.6.1.4.1.1916.1.47.1.1.2.1.4
OctetString
.1.3.6.1.4.1.1916.1.47.1.1.2.1.5
OctetString
.1.3.6.1.4.1.1916.1.47.1.1.2.1.6
.1.3.6.1.4.1.1916.1.47.1.1.2.1.7
.1.3.6.1.4.1.1916.1.47.1.1.3
.1.3.6.1.4.1.1916.1.47.1.1.3.1
.1.3.6.1.4.1.1916.1.47.1.1.3.1.1
.1.3.6.1.4.1.1916.1.47.1.1.3.1.2
.1.3.6.1.4.1.1916.1.47.2
.1.3.6.1.4.1.1916.1.47.2.1
.1.3.6.1.4.1.1916.1.47.2.2
Dependencies (22) 5 direct · 17 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Enumeration
down(1)
up(2)
Conformance Groups (3)
Objects for the cfm group.
.1.3.6.1.4.1.1916.1.47.2.2.1
Objects for the cfm group Remote MEP.
.1.3.6.1.4.1.1916.1.47.2.2.2
Objects for the Notifications group.
.1.3.6.1.4.1.1916.1.47.2.2.3
Compliance Statements (1)

OID .1.3.6.1.4.1.1916.1.47.2.1.1
The compliance statement for support of the Extreme CFM MIB module.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.1916.1.47.0.1
A Group status is changed. A notification (DownUpAlarm)
is sent to the management entity with the OID of the Group
that has detected the status change.

The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the Group reporting the status
by the indices in the OID of the extremeCfmGroupStatus
variable in the notification:

dot1agCfmMdIndex - Also the index of the MEP's
Maintenance Domain table entry
(dot1agCfmMdTable).
dot1agCfmMaIndex - Also an index (with the MD table index)
of the MEP's Maintenance Association
network table entry
(dot1agCfmMaNetTable), and (with the MD
table index and component ID) of the
MEP's MA component table entry
(dot1agCfmMaCompTable).
dot1agCfmMepIdentifier - MEP Identifier and final index
into the MEP table (dot1agCfmMepTable).
extremeCfmGroupIndex -Group Identifier and final index
into the Group table (extremeCfmGroupTable).