ETHER-WIS Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

etherWisDeviceTable

table

.1.3.6.1.2.1.10.134.1.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk etherWisDeviceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ETHER-WIS' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ETHER-WIS::etherWisDeviceTable'

The table for Ethernet WIS devices

etherWisDeviceEntry row .1.3.6.1.2.1.10.134.1.1.1.1

An entry in the Ethernet WIS device table. For each
instance of this object there MUST be a corresponding
instance of sonetMediumEntry.

Indexes

IF-MIBifIndex

Column Syntax OID

etherWisDeviceTxTestPatternMode

This variable controls the transmit test pattern mode.
The value none(1) puts the the WIS transmit path into
the normal operating mode. The value squareWave(2) puts
the WIS transmit path into the square wave test patte…

Enumerationr/w

Enumerated Values:

1	none
2	squareWave
3	prbs31
4	mixedFrequency

.1.3.6.1.2.1.10.134.1.1.1.1.1

etherWisDeviceRxTestPatternMode

This variable controls the receive test pattern mode.
The value none(1) puts the the WIS receive path into the
normal operating mode. The value prbs31(3) puts the WIS
receive path into the PRBS31 test pattern mode desc…

Enumerationr/w

Enumerated Values:

1	none
3	prbs31
4	mixedFrequency

.1.3.6.1.2.1.10.134.1.1.1.1.2

etherWisDeviceRxTestPatternErrors

This object counts the number of errors detected when the
WIS receive path is operating in the PRBS31 test pattern
mode. It is reset to zero when the WIS receive path
initially enters that mode, and it increments each …

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.2.1.10.134.1.1.1.1.3

etherWisSectionCurrentTable

table

.1.3.6.1.2.1.10.134.1.2.1 · 1 row entry · 2 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk etherWisSectionCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ETHER-WIS' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ETHER-WIS::etherWisSectionCurrentTable'

The table for the current state of Ethernet WIS sections.

etherWisSectionCurrentEntry row .1.3.6.1.2.1.10.134.1.2.1.1

An entry in the etherWisSectionCurrentTable. For each
instance of this object there MUST be a corresponding
instance of sonetSectionCurrentEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
etherWisSectionCurrentJ0Transmitted This is the 16-octet section trace message that is transmitted in the J0 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the section trace function is not used, a…	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.2.1.10.134.1.2.1.1.1`
etherWisSectionCurrentJ0Received This is the 16-octet section trace message that was most recently received in the J0 byte.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.2.1.10.134.1.2.1.1.2`

etherWisPathCurrentTable

table

.1.3.6.1.2.1.10.134.2.1.1 · 1 row entry · 3 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk etherWisPathCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ETHER-WIS' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ETHER-WIS::etherWisPathCurrentTable'

The table for the current state of Ethernet WIS paths.

etherWisPathCurrentEntry row .1.3.6.1.2.1.10.134.2.1.1.1

An entry in the etherWisPathCurrentTable. For each
instance of this object there MUST be a corresponding
instance of sonetPathCurrentEntry.

Indexes

IF-MIBifIndex

Column Syntax OID

etherWisPathCurrentStatus

This variable indicates the current status of the
path payload with a bit map that can indicate multiple
defects at once. The bit positions are assigned as
follows:

etherWisPathLOP(0)
This bit is set …

Bits

Enumerated Values:

0	etherWisPathLOP
1	etherWisPathAIS
2	etherWisPathPLM
3	etherWisPathLCD

.1.3.6.1.2.1.10.134.2.1.1.1.1

etherWisPathCurrentJ1Transmitted

This is the 16-octet path trace message that
is transmitted in the J1 byte. The value SHOULD
be '89'h followed by fifteen octets of '00'h
(or some cyclic shift thereof) when the path
trace function is not used, and the…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.2.1.10.134.2.1.1.1.2

etherWisPathCurrentJ1Received

This is the 16-octet path trace message that
was most recently received in the J1 byte.

OctetString

Constraints:
range: 16-16

.1.3.6.1.2.1.10.134.2.1.1.1.3

etherWisFarEndPathCurrentTable

table

.1.3.6.1.2.1.10.134.2.2.1 · 1 row entry · 1 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk etherWisFarEndPathCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ETHER-WIS' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ETHER-WIS::etherWisFarEndPathCurrentTable'

The table for the current far-end state of Ethernet WIS
paths.

etherWisFarEndPathCurrentEntry row .1.3.6.1.2.1.10.134.2.2.1.1

An entry in the etherWisFarEndPathCurrentTable. For each
instance of this object there MUST be a corresponding
instance of sonetFarEndPathCurrentEntry.

Indexes

IF-MIBifIndex

Column Syntax OID

etherWisFarEndPathCurrentStatus

This variable indicates the current status at the
far end of the path using a bit map that can indicate
multiple defects at once. The bit positions are
assigned as follows:

etherWisFarEndPayloadDefect(0)…

Bits

Enumerated Values:

0	etherWisFarEndPayloadDefect
1	etherWisFarEndServerDefect

.1.3.6.1.2.1.10.134.2.2.1.1.1