ES4626-50-MIB Table View

the power supply status is only used for chassis switch

sysPowerStateEntry row .1.3.6.1.4.1.259.8.1.2.100.1.7.1

power supply status

Indexes

sysPowerSlotIndex

Column	Syntax	OID
sysPowerSlotIndex Module model No.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.7.1.1
sysPowerState if the power supply insert	Enumeration Enumerated Values: 0 sysPowerNotInstalled 1 sysPowerInstalled	.1.3.6.1.4.1.259.8.1.2.100.1.7.1.2
sysPowerValue Power Value	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.1.7.1.3
sysPowerType Power Type	Enumeration Enumerated Values: 0 systemPower 1 poePower	.1.3.6.1.4.1.259.8.1.2.100.1.7.1.4
sysPowerStatus Power Status	Enumeration Enumerated Values: 0 normal 1 abnormal 2 na Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.1.7.1.5

machine information,it is only used by chassis.

sysSlotEntry row .1.3.6.1.4.1.259.8.1.2.100.1.8.1

Switch information

Indexes

sysSlotIndex

Column	Syntax	OID
sysSlotIndex Module Model No.	SNMPv2-SMIInteger32 Constraints: range: 0-15	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.1
sysCPUType CPU type	DisplayString Constraints: range: 0-15	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.2
sysCPUFiveSecondIdle Last 5 second CPU IDLE	SNMPv2-SMIInteger32 Constraints: range: 0-15	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.3
sysCPUThirtySecondIdle Last 30 second CPU IDLE	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.4
sysCPUFiveMinuteIdle Last 5 minute CPU IDLE	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.5
sysCPUIdle From running CPU IDLE	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.6
sysMemorySize memory size	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.7
sysMemoryBusy memory usage rent	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.8
sysFlashSize The flash capacity of this slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.9
sysTemperature The Temperature of this slot.80 is 80centigrade	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.10
sysCpuUsage The CPU usage of this slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.8.1.11

Table of descriptive and status information about
switches in this system.

switchInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.1.9.1

An entry in the table, containing information
about a single switch in this system.

Indexes

swSlotIndex swUnitIndex

Column	Syntax	OID
swSlotIndex This object identifies the slot within the switch for which this entry contains information. While for the chassis device, the value is real switch slot number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.9.1.1
swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.1.9.1.2
swModuleType Type of expansion module in this switch slot.	Enumeration Enumerated Values: 0 typeMFC 1 typeSFC 2 type1GS 3 type1GL 4 type100M1GT 8 type10M100MT 101 type1-M12GB 102 type1-12GT 103 type1-210Gx 104 type1-110Gx 105 type1-CPU8245 106 type1-BACKPLANE 107 type1-24GB 108 type1-24GT 109 type1-36TX 110 type1-4GX32TX 111 type1-16FX 112 type1-ES2GB 113 type1-M4GX24TX 114 type1-ES 115 type1-MI 116 type1-MII 117 type1-12GB 118 type1-M8GB 119 type1-2XFP8GX16GB 120 type1-8GX16GB 121 type1-4GX24TX 122 type1-L-M4GX24TX 123 type1-1XFP8GX16GB 124 type1-2XFP12GX12GT 125 type1-12GX12GT 126 type1-1XFP12GX12GT 127 type1-48GT 128 type1-M1XFP12GX12GT 129 type1-4XFP 130 type1-48GB 131 type1-M44GT 132 type1-M1XFP12GX12GB 133 type1-12GX12GB 134 type1-2XFP12GX12GB 136 type1-2XFP24GB12GT 137 type1-24GB12GT 138 type1-NEWMI 139 type1-M1XFP12GX12GTR4 140 type1-12GX12GTR4 141 type1-2XFP12GX12GTR4 165 type2-M12GB 166 type2-12GT 167 type2-210Gx 168 type2-110Gx 169 type2-CPU8245 170 type2-BACKPLANE 171 type2-24GB 172 type2-24GT 173 type2-36TX 174 type2-4GX32TX 175 type2-16FX 176 type2-ES2GB 177 type2-M4GX24TX 178 type2-ES 179 type2-MI 180 type2-MII 181 type2-12GB 182 type2-M8GB 183 type2-2XFP8GX16GB 184 type2-8GX16GB 185 type2-4GX24TX 186 type2-L-M4GX24TX 187 type2-1XFP8GX16GB 188 type2-2XFP12GX12GT 189 type2-12GX12GT 190 type2-1XFP12GX12GT 191 type2-48GT 192 type2-M1XFP12GX12GT 193 type2-4XFP 194 type2-48GB 195 type2-M44GT 196 type2-M1XFP12GX12GB 197 type2-12GX12GB 198 type2-2XFP12GX12GB 200 type2-2XFP24GB12GT 201 type2-24GB12GT 202 type2-NEWMI 203 type2-M1XFP12GX12GTR4 204 type2-12GX12GTR4 205 type2-2XFP12GX12GTR4 228 type3-M 229 type3-MI 231 type3-24GT 232 type3-24GB 234 type3-4XFP	.1.3.6.1.4.1.259.8.1.2.100.1.9.1.3

the state of fan.

sysFanEntry row .1.3.6.1.4.1.259.8.1.2.100.1.12.1

fan supply status

Indexes

sysFanIndex

Column	Syntax	OID
sysFanIndex system fan entry index	SNMPv2-SMIInteger32 Constraints: range: 100-699	.1.3.6.1.4.1.259.8.1.2.100.1.12.1.1
sysFanInserted Whether the slot fan is installed or not.	Enumeration Enumerated Values: 0 sysFanNotInstalled 1 sysFanInstalled	.1.3.6.1.4.1.259.8.1.2.100.1.12.1.2
sysFanStatus Whether the slot fan is normal or abnormal.	Enumeration Enumerated Values: 0 normal 1 abnormal	.1.3.6.1.4.1.259.8.1.2.100.1.12.1.3
sysFanSpeed Status of Fan. Status: Low(1), Medium(2), High(3), none(0) is readonly	Enumerationr/w Enumerated Values: 0 none 1 low 2 medium 3 high Constraints: range: 100-699	.1.3.6.1.4.1.259.8.1.2.100.1.12.1.4

correlative information list with instance

mstpInstanceEntry row .1.3.6.1.4.1.259.8.1.2.100.2.2.2.1

The index of this table is instance ID

Indexes

mstpInstanceID

Column	Syntax	OID
mstpInstanceID instance ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.1
mstpInstanceVlans the map of vlans to instance.The input format is consonant with cli.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.2
mstpInstanceSwitchPriority The priority of the router in the special instance.	Integer32r/w Constraints: range: 0-61440 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.2.2.2.1.3

interrelated parameter list of instance and port

mstpInstancePortEntry row .1.3.6.1.4.1.259.8.1.2.100.2.2.3.1

The index of this table is instance ID and port index

Indexes

mstpInstancePortInstanceID mstpInstancePortPortIndex

Column	Syntax	OID
mstpInstancePortInstanceID instance ID	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.1
mstpInstancePortPortIndex port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.2
mstpInstancePortCost port cost of port under the special instance	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.3
mstpInstancePortPriority port priority of port under the special instance	Integer32r/w Constraints: range: 0-240 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.4
mstpInstancePortRootGuard rootguard enable/disable on the current instance	Enumerationr/w Enumerated Values: 0 disable 1 enable Constraints: range: 0-7	.1.3.6.1.4.1.259.8.1.2.100.2.2.3.1.5

mstp information list of port

mstpPortInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.2.2.4.1

The index of this table is port index

Indexes

mstpPortInfoPortIndex

Column	Syntax	OID
mstpPortInfoPortIndex port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.1
mstpPortInfoEnable enable/disable mstp on the port.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.2
mstpPortLinkType the p2p link type of the port	Enumerationr/w Enumerated Values: 0 force-false 1 force-true 2 auto Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.3
mstpPortMcheck trigger/untrigger	Enumerationr/w Enumerated Values: 0 untrigger 1 trigger Constraints: range: 0-7	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.4
mstpPortPortFast default:the port mode is portfast mode bpdufilter:the port mode is portfast mode with bpdufilter bpduguard:the port mode is portfast mode with bpduguard noportfast:the port mode is not portfast mode	Enumerationr/w Enumerated Values: 0 default 1 bpdufilter 2 bpduguard 3 noportfast Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.5
mstpPortFormat which mode can be setted up port of message format function	Enumerationr/w Enumerated Values: 0 standard 1 privacy 2 auto Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.6
mstpPortDigestSnp Whether the port use peer's authentication key	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.7
mstpPortTCFlush when topology is changed, how to flush the mac	Enumerationr/w Enumerated Values: 0 useglobal 1 enable 2 disable 3 protect	.1.3.6.1.4.1.259.8.1.2.100.2.2.4.1.8

A list of port entries.

priPortEntry row .1.3.6.1.4.1.259.8.1.2.100.3.2.1

A port entry containing port information,
status, and control.

Indexes

portIndex

Column	Syntax	OID
portIndex port No.	Integer32 Constraints: range: 1-1024 range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.1
portName Name of the port. exp:financial.	OctetString Constraints: range: 0-32 range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.2
switchNum This value is denoting the number of swith in which this port resides. For the non-stackable device,the value is always 1. While for the stackable device, the value is real switch stack number.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.3
slotNum This value is denoting the number of slot. For the static slot,the value is 1,while for the extended slot the value is real extended slot number.	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.4
portType Type of expansion module in this port.	Enumeration Enumerated Values: 0 typeSFP 1 typeCombo 2 typeFiber 3 typeSingleOptFE 4 typeMultiOptFE 5 typeElecFE 6 typeSingleOptGE 7 typeMultiOptGE 8 typeElecGE 9 typePortAGG 10 typePortUsbGE 11 typeOptXge 255 other Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.5
flowControlStatus The flow-control status of the port. Its functionality is exactly same as 'flow control' or 'no flow control' commands in console mode.	Enumerationr/w Enumerated Values: 0 disable 1 enable Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.6
bandwidthControlStatus The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.	Enumeration Enumerated Values: 0 ingress 1 egress 2 both 3 none	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.7
maxBandwidth The max bandwidth of the port.	Enumeration Enumerated Values: 0 default 1 bw100M 2 bw1000M 3 bw10000M	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.8
receiveBandwidth The recevice bandwidth of the port. Its unit is kbs. The command 'bandwidth control 50 both' in console mode equals setting both receiveBandwidth and transmitBandwidth to 50 kbs. Set 0 is no bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.9
transmitBandwidth The transmit bandwidth of the port. Its unit is kbs. Set 0 is no bandwidth.	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.10
shutdown Close or open to specify the port.	Enumerationr/w Enumerated Values: 0 shutDown 1 noshutdown Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.12
loopback Open or close to specify the wreath of the port back to test the function.	Enumerationr/w Enumerated Values: 0 noloopback 1 loopback	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.13
speedDuplex The speed and duplex status of the port.	Enumerationr/w Enumerated Values: 0 auto 1 half10 2 full10 3 half100 4 full100 5 half1000 6 full1000 13 fx-100	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.14
portMode port mode: 1 is access,2 is trunk,3 is hybrid	Enumerationr/w Enumerated Values: 1 access 2 trunk 3 hybrid	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.15
pvid port of native vlan No.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.16
indicatesType Indicates the port type of the configuration of the switch.	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp 9 hundredBaseFxScSingleMode 10 hundredBaseFxScMultiMode 11 thousandBaseCX 12 tenG Constraints: range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.17
vctAction This object indicates the VCT action of the port,only the value 1 is permitted when SET this entry though you can GET 1(processing) and 0(succeed); The specified port will be shutdown when one sets 1 to this entry,and …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.18
vctLastStatus Indicates the last VCT status of the port.	OctetString Constraints: range: 0-1000	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.19
portTrunkAllowedvlan trunk port allowed vlan list string	OctetStringr/w Constraints: range: 1-100	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.20
portHybridTaggedAllowedvlan hybrid port tagged allowed vlan list string	OctetStringr/w Constraints: range: 1-100 range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.21
portHybridUntaggedAllowedvlan hybrid port untagged allowed vlan list string	OctetStringr/w Constraints: range: 1-100 range: 0-255	.1.3.6.1.4.1.259.8.1.2.100.3.2.1.22

A table of iPAddrEntry.

iPAddrEntry row .1.3.6.1.4.1.259.8.1.2.100.4.3.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

iPAddrVid iPAddrIPAddress

Column	Syntax	OID
iPAddrVid The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.4.3.1.1
iPAddrIPAddress The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what …	SNMPv2-SMIIpAddress Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.4.3.1.2
iPAddrSubnetMask The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out wha…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.259.8.1.2.100.4.3.1.3
iPAddrPrimaryInterface Whether this is a primary interface.	Enumerationr/w Enumerated Values: 0 primary 1 secondary Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.4.3.1.4
iPAddrStatus Now state.	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.4.3.1.5

A table of interfaceEntry.

interfaceEntry row .1.3.6.1.4.1.259.8.1.2.100.4.4.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

intfacetype intfaceID

Column	Syntax	OID
intfacetype The Type of interface. Now support(1)vintf and (2)loopback.	Enumeration Enumerated Values: 1 vintf 2 loopback 3 tunnel Constraints: range: 1-24	.1.3.6.1.4.1.259.8.1.2.100.4.4.1.1
intfaceID The Number of interface. exp:intfacetype(1),interfaceID(2) means interface vlan 2. if intfacetype(2) interfaceID(4) means interface loopback4. if intfacetype(3) interfaceID(5) means interface Tunnel5.	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.4.4.1.2
intfaceIndex The Index of interface.	SNMPv2-SMIInteger32 Constraints: range: 1-8	.1.3.6.1.4.1.259.8.1.2.100.4.4.1.3
intfaceStatus Now state.	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.4.4.1.5

A table containing current configuration information
for each VLAN currently configured into the device by
(local or network) management.

vlanInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.5.1.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

vlanID

Column	Syntax	OID
vlanID This value is vlan's ID.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.259.8.1.2.100.5.1.1.1
vlanName which may be used to identify the VLAN.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.259.8.1.2.100.5.1.1.2
vlanPortNumber The sum of vlan's ports.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.5.1.1.3
vlanRowStatus This object indicates the status of this entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.5.1.1.4

Table of descriptive and status information about
jumbly stacking in this system.

jumblyStackingInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.6.2.1

An entry in the table, containing information
about stacking switch in this system.

Indexes

swUnitIndex

Column	Syntax	OID
stackingUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.6.2.1.1
swHardwareVersion The text string denoting the version of the hardware.	OctetString Constraints: range: 1-32 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.6.2.1.2
swSoftwareVersion The text string denoting the version of the software.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.6.2.1.3
swCPUMac the Mac address of the machine.	OctetString Constraints: range: 17-17	.1.3.6.1.4.1.259.8.1.2.100.6.2.1.4
swType Type of this switch.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.6.2.1.5

The table of port security

portSecurityEntry row .1.3.6.1.4.1.259.8.1.2.100.7.1.1

An entry in the port security table.

Indexes

psPortIndex

Column	Syntax	OID
psPortIndex A unique value for each port	SNMPv2-SMIInteger32 Constraints: range: 0-10	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.1
psPortSecurity enable or disable mac bind on this port	Enumerationr/w Enumerated Values: 0 disable 1 enable Constraints: range: 0-10	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.2
psSecuritytSaticMacAdd bind Security mac address on this port	OctetStringr/w Constraints: range: 17-17	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.3
psSecurityStaticMacDel delete Security mac address on this port	OctetStringr/w Constraints: range: 17-17	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.4
psSecurityPortLock lock or unlock this port	Enumerationr/w Enumerated Values: 0 unlock 1 lock Constraints: range: 3-32	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.5
psSecurityPortMax Maximum secure addrs on this port	Integer32r/w Constraints: range: 1-128 range: 0-6	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.6
psSecurityPortConvertmac convert dynamic mac to security mac	Integer32r/w Constraints: range: 1-1 range: 0-6	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.7
psSecurityPortLocktimer lock timer on this port	Integer32r/w Constraints: range: 0-300 range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.7.1.1.8

Table of descriptive and status information about security port

securityMacPortEntry row .1.3.6.1.4.1.259.8.1.2.100.7.2.1

An entry in the security mac port table.

Indexes

secPortIndex secMacAdress

Column	Syntax	OID
secPortIndex A unique value for each port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.7.2.1.1
secMacAdress Mac adress bind on this port	OctetString Constraints: range: 17-17	.1.3.6.1.4.1.259.8.1.2.100.7.2.1.2
secVid vlan id of this port(pvid)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.7.2.1.3

IopgmpSnoing configuration in vlan.

priIgmpSnoopingEntry row .1.3.6.1.4.1.259.8.1.2.100.8.2.1

IgmpSnooping confition in vlan.

Indexes

priIgmpSnoopingvlanID

Column	Syntax	OID
priIgmpSnoopingvlanID This value is vlan's ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.1
priIgmpSnoopingvlanEnable Enable or disable the IgmpSnooping in the switch.Default:0	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.2
priIgmpSnoopingleave Enable or disable the immediate leave config.Default:0	Enumerationr/w Enumerated Values: 0 no-immediate-leave 1 immediate-leave	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.3
priIgmpSnoopingL2gen Enable or disable the l2-general-querier config.Default:0	Enumerationr/w Enumerated Values: 0 no-l2-general-querier 1 l2-general-querier	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.4
priIgmpSnoopingGroupNum set the maximum IGMP group the port can join	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.5
priIgmpSnoopingSourceNum set the maximum source number	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.6
priIgmpSnoopingPort Get static mrouter port of vlan. ethernet: Name of Ethernet port ifname: Name of interface port-channel: Port aggregation.	DisplayString Constraints: range: 1-44	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.7
priIgmpSnoopingPortTime Configure this survive time of mrouter port.Default: 255s	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.8
priIgmpSnoopingQueryInterval Configure this query interval. Default: 125s	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.9
priIgmpSnoopingQueryMrsp Configure the maximum query response period. Default: 10s	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.10
priIgmpSnoopingQueryRobustness Configure the query robustness.Default: 2	Integer32r/w Constraints: range: 2-10	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.11
priIgmpSnoopingSuppression Configure the suppression query time.Default: 255s	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.259.8.1.2.100.8.2.1.12

port of qinq tunnel function list

dot1qTunnelEntry row .1.3.6.1.4.1.259.8.1.2.100.9.1.1

configure of dot1qTunnel

Indexes

qinqPortIndex

Column	Syntax	OID
qinqPortIndex port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.9.1.1.1
tunnelPortEnable Enable or disable the dot1q-tunnel in this port.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.259.8.1.2.100.9.1.1.2
tunnelPortType Protocol type of trunk port(TPID)(exp:8100/9100/9200).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.9.1.1.3

VLAN translation basic config.

vlanTranslationEntry row .1.3.6.1.4.1.259.8.1.2.100.9.2.1

VLAN translation

Indexes

translatPortIndex

Column	Syntax	OID
translatPortIndex Index of Port.	SNMPv2-SMIInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.9.2.1.1
translationEnable if the port can be done translation function	Enumerationr/w Enumerated Values: 0 disable 1 enable Constraints: range: 1-16	.1.3.6.1.4.1.259.8.1.2.100.9.2.1.2
translationDropType when VLAN-translation missed, drop packet mode	Enumerationr/w Enumerated Values: 1 in 2 out 3 both 4 noIn 5 noOut 6 noBoth Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.9.2.1.3

port VLAN-translation of translation relation list

vlanTranslationTypeEntry row .1.3.6.1.4.1.259.8.1.2.100.9.3.1

port VLAN translation of translation relation,index is port index and translation sort

Indexes

translatPortTypeIndex translationType translationOldVlanid translationNewVlanid

Column	Syntax	OID
translatPortTypeIndex port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.9.3.1.1
translationType translation type. in:input translation; out:output translation.	Enumeration Enumerated Values: 1 in 2 out	.1.3.6.1.4.1.259.8.1.2.100.9.3.1.2
translationOldVlanid vlantranslation pre-vid	Integer32 Constraints: range: 1-4094 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.9.3.1.3
translationNewVlanid the new vid	Integer32 Constraints: range: 1-4094 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.9.3.1.4
translationTypeStatus accession/delete VLAN-translation relation	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.9.3.1.5

timeRange Table

timeRangeEntry row .1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1

timeRange Entry

Indexes

timeRangeName

Column	Syntax	OID
timeRangeName TimeRange name	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.1
timeRangeType TimeRange type	Enumerationr/w Enumerated Values: 0 absolute 1 absolutePeriodic 2 periodic	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.2
timeRangeStWeek configurate the start week	Enumerationr/w Enumerated Values: 1 monday 2 tuesday 4 wednesday 8 thursday 16 friday 32 saturday 64 sunday Constraints: range: 1-23	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.3
timeRangeStTime configurate the start clock	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.4
timeRangeStDate configurate the start Date	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.5
timeRangeEndWeek configurate the end week	Enumerationr/w Enumerated Values: 1 monday 2 tuesday 4 wednesday 8 thursday 16 friday 32 saturday 64 sunday	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.6
timeRangeEndTime configurate the end clock	DisplayStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.7
timeRangeEndDate configurate the end date	DisplayStringr/w Constraints: range: 1-20	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.8
timeRangeStatus TimeRange configurate status machine	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.1.1.9

TimeRange show Table

timeRangeShowEntry row .1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1

TimeRange show Entry

Indexes

timeRangeShowName timeRangeElemNum

Column	Syntax	OID
timeRangeShowName TimeRange name	DisplayString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.1
timeRangeElemNum TimeRange group index	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.2
timeRangeShow TimeRange configure status	DisplayString	.1.3.6.1.4.1.259.8.1.2.100.10.1.2.2.1.3

ACL show list

showAclEntry row .1.3.6.1.4.1.259.8.1.2.100.10.1.5.1

ACL show

Indexes

aclName aclRuleNum

Column	Syntax	OID
aclName ACL group name	OctetString Constraints: range: 1-64 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.1
aclRuleNum the index of rule in the special access group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.2
aclConfig ACL configure status	DisplayString	.1.3.6.1.4.1.259.8.1.2.100.10.1.5.1.3

The table for Secure Shell Connection.

sshUseEntry row .1.3.6.1.4.1.259.8.1.2.100.10.2.5.1

The conceptual row for sshConnInfoTable.

Indexes

sshUserIndex HUAWEI-ENT-VOICE-PBX-MIBhwEntPbxNewCallerChgName

Column	Syntax	OID
sshUserIndex	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.1
sshUserName	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.2
sshUserType	Enumerationr/w Enumerated Values: 0 noCryptograph 7 cryptograph Constraints: range: 1-24	.1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.3
sshUserPassword	OctetStringr/w Constraints: range: 1-32 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.4
sshUserStatus	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.2.5.1.5

The table for Secure Shell Connection.

sshConnInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.10.2.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.1
sshConnVersion The SSH version.	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.2
sshConnStatus The SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start state, sessionStart(3) mean the SSH is in session start State.	Enumeration Enumerated Values: 1 negotiationStart 2 authenticationStart 3 sessionStart Constraints: range: 1-24	.1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.3
sshConnUserName User Name.	DisplayString	.1.3.6.1.4.1.259.8.1.2.100.10.2.6.1.4

IP address of TACACS server.

tacacsServerHostEntry row .1.3.6.1.4.1.259.8.1.2.100.10.3.1.1

Indexes

tacacsServerHostIndex

Column	Syntax	OID
tacacsServerHostIndex IP address of TACACS server.	SNMPv2-SMIInteger32 Constraints: range: 1-24	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.1
tacacsServerHostIP IP address of TACACS server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.2
tacacsServerHostPort Port of TACACS server.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.3
tacacsServerHostPrimary	Enumerationr/w Enumerated Values: 0 noPrimary 1 primary Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.4
tacacsServerHostStatus	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.5
tacacsServerHostKey Key for TACACS.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.6
tacacsServerHostTimeout The time before retransmit of the TACACS server.	Integer32r/w Constraints: range: 1-60 range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.10.3.1.1.7

Access Management information list of port.

amPortInfoEntry row .1.3.6.1.4.1.259.8.1.2.100.10.4.2.1

Indexes

amPortIndex HUAWEI-ENT-VOICE-PBX-MIBhwEntPbxRerouteDealName amPortIp

Column	Syntax	OID
amPortIndex port index	SNMPv2-SMIInteger32 Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.1
amPortEnable Enable or disable the Access Management on the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.2
amPortForwardingType Access Management forwarding type.	Enumerationr/w Enumerated Values: 1 ip-pool 2 mac-ip-pool Constraints: range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.3
amPortIp IP address of Access Management.	SNMPv2-SMIIpAddress Constraints: range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.4
amPortMac Mac address of Access Management.	OctetStringr/w Constraints: range: 17-17	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.5
amPortCount Seriate IP address number.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.6
amPortStatus	Enumerationr/w Enumerated Values: 0 createAndGo 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.10.4.2.1.7

Configuration items and information list of RADIUS authentication server host.

radiusAuthenServerHostEntry row .1.3.6.1.4.1.259.8.1.2.100.10.5.5.1

Indexes

radiusAuthenServerHostIndex

Column	Syntax	OID
radiusAuthenServerHostIndex Index of RADIUS authentication server.	SNMPv2-SMIInteger32 Constraints: range: 0-10	.1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.1
radiusAuthenServerHostIP IP address of RADIUS authentication server.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-8	.1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.2
radiusAuthenServerHostPort Port of RADIUS authentication server.	Integer32r/w Constraints: range: 0-65535 range: 0-10	.1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.3
radiusAuthenServerHostPrimary Configuration of primary or not primary	Enumerationr/w Enumerated Values: 0 noPrimary 1 primary Constraints: range: 0-8	.1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.4
radiusAuthenServerHostStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.10.5.5.1.5

Configuration items and information list of RADIUS accounting server host.

radiusAcctServerHostEntry row .1.3.6.1.4.1.259.8.1.2.100.10.5.6.1

Indexes

radiusAcctServerHostIndex

Column	Syntax	OID
radiusAcctServerHostIndex Index of RADIUS accounting server.	SNMPv2-SMIInteger32 Constraints: range: 0-8	.1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.1
radiusAcctServerHostIP IP address of RADIUS accounting server.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-5	.1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.2
radiusAcctServerHostPort Port of RADIUS accounting server.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.3
radiusAcctServerHostPrimary Configuration of primary or not primary	Enumerationr/w Enumerated Values: 0 noPrimary 1 primary Constraints: range: 0-8	.1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.4
radiusAcctServerHostStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.10.5.6.1.5

qos port configration.

qosPortEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.2.1

qos port list of concrete definition.index is port index

Indexes

qosPortIndex

Column	Syntax	OID
qosPortIndex port Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.1
qosPortType the relation between qosPortType and CLI: 1 mls qos cos {<default-cos> }; 0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] [pass-through-dscp]| ip-precedence [pass-through-cos] […	Enumerationr/w Enumerated Values: 0 trust 1 cos 2 dscpMutation 3 priorityQueueOut	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.2
qosPortCos port default cos value	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.3
qosPortTrust Configure port trust. priority(0),mls qos trust port priority <cos>; priAndPassThroughDscp(1),opposite cli is mls qos trust port priority <cos> pass-through-dscp; priAndPassThroughCos(2),opposite cli is mls qos trust po…	Enumerationr/w Enumerated Values: 0 priority 1 priAndPassThroughDscp 2 priAndPassThroughCos 3 priAndPassThroughCosAndPassThroughDscp 4 cos 5 cosAndPassThroughDscp 6 cosAndPassThroughCos 7 cosAndPassThroughCosAndPassThroughDscp 8 dscp 9 dscpAndPassThroughCos 10 dscpAndPassThroughDscp 11 dscpAndPassThroughDscpAndPassThroughCos 12 ipPrecedence 13 ipPreAndPassThroughCos 14 ipPreAndPassThroughDSCP 15 ipPreAndPassThroughDSCPAndPassThroughCos 16 mplsEXP	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.4
qosPortPriority The corresponding CLI:mls qos trust port priority <cos>.	Integer32r/w Constraints: range: 0-7 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.5
qosPortMutation configure port of dscp-mutation,opposite cli 'mls qos dscp-mutation <dscp-mutation-name>'	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.6
qosPortQueue priorityQueue configure queue out method to strict priority-queue method; wrrQueue restores the default wrr queue out method.	Enumerationr/w Enumerated Values: 0 priorityQueue 1 wrrQueue Constraints: range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.7
qosPortStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy Constraints: range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.2.1.8

classmap configure list

qosclassmapEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.3.1

about classmap list of concrete definition,index is classmapname.

Indexes

qosClassMapName

Column	Syntax	OID
qosClassMapName classmap name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.1
qosClassMapType 0 class-map <class-map-name>,index is classmapname; 1 match access-group <acl-index-or-name>,need qosClassMapAccessGroup cooperation; 2 match ip dscp <dscp-list> qosClassMapDscp ; 3 match ip precedence <ip-precedence…	Enumerationr/w Enumerated Values: 0 configurClassMap 1 accessGroup 2 dscp 3 ippre 4 vlan 5 v6dscp 7 v6Flow 8 v6AccessGroup 9 cos 10 exptopmost Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.2
qosClassMapAccessGroup Match specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1).	DisplayStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.3
qosClassMapDscp Match specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2).	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.4
qosClassMapV6Dscp Match specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5).	DisplayStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.5
qosClassMapIpPre Match specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3).	DisplayStringr/w Constraints: range: 0-65534	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.6
qosClassMapV6AccGroup Match specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8).	DisplayStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.7
qosClassMapV6Flow Match specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6).	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.8
qosClassMapVlan Match specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4).	DisplayStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.9
qosClassCos Match specify Cos . This object be configured only if qosClassMapType in the same row is cos(9).	DisplayStringr/w Constraints: range: 0-254	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.10
qosClassMapEXPtopmost Match specify MPLS EXP. This object be configured only if qosClassMapType in the same row is EXPtopmost(10).	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.11
qosClassMapStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.11.1.3.1.12

qos policy list

qosPolicyEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.4.1

qos policy list of definition,index is qos policy and classmap of name

Indexes

qosPolicyName

Column	Syntax	OID
qosPolicyName QoS Policy name	OctetString Constraints: range: 1-32 range: 1-128	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.1
qosPolicyClassMap Specify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then setting the qosPolicyStatus …	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.2
qosPolicyType the relation between qosPolicyType and CLI: 0 policy-map <policy-map-name>; 1 class <class-map-name>; 2 police <rate-kbps> <burst-kbyte> [exceed-action {drop | policed-dscp-transmit}]; 3 police aggregate <aggregate-…	Enumerationr/w Enumerated Values: 0 policymap 1 matchclassmap 2 sp 3 aggregatePolicer Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.3
qosPolicyRateKbps Rate Bandwidth of one policymap. This object be configured only if qosPolicyType in the same row is sp(2).	Integer32r/w Constraints: range: 1-10000000 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.4
qosPolicyNormalBurstKbps Normal burst kbytes.	Integer32r/w Constraints: range: 1-1000000	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.5
qosPolicyMaximumBurstKbps Maximum burst kbytes.	Integer32r/w Constraints: range: 1-1000000 range: 1-16	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.6
qosPolicyPeakKbps Peak information rate.	Integer32r/w Constraints: range: 1-1000000 range: 1-16	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.7
qosPolicyConformAction conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 set-dscp-transmit 3 set-prec-transmit Constraints: range: 1-10	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.8
qosPolicyConformActionChangeValue If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.	Integer32r/w Constraints: range: 0-63 range: 1-10	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.9
qosPolicyExceedAction exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mar…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 policeDscpTransmit Constraints: range: 1-10	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.10
qosPolicyViolateAction violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is violate; violate-action policed-dscp-transmit specifies to ma…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 policeDscpTransmit Constraints: range: 1-10	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.11
qosPolicyAggregatePolicer aggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3).	DisplayStringr/w	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.12
qosPolicyStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.11.1.4.1.13

qos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content,
please refer to qosshow node for the running configuraton

qosAggPolicerEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.5.1

index is AggPolicer name.

Indexes

qosAggPolicerName

Column	Syntax	OID
qosAggPolicerName QoS qosAggPolicer name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.1
qosAggPolicerRateKbps Rate Bandwidth of After the classification.	Integer32r/w Constraints: range: 1-10000000	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.2
qosAggPolicerNormalBurstKbps Normal burst kbytes.	Integer32r/w Constraints: range: 1-1000000	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.3
qosAggPolicerMaximumBurstKbps Maximum burst kbytes.	Integer32r/w Constraints: range: 1-1000000 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.4
qosAggPolicerPeakKbps Peak information rate.	Integer32r/w Constraints: range: 1-1000000 range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.5
qosAggPolicerConformAction conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 set-dscp-transmit 3 set-prec-transmit	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.6
qosAggPolicerConformActionChangeValue If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.	Integer32r/w Constraints: range: 0-63 range: 0-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.7
qosAggPolicerExceedAction exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mar…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 policeDscpTransmit	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.8
qosAggPolicerViolateAction violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is violate; violate-action policed-dscp-transmit specifies to ma…	Enumerationr/w Enumerated Values: 0 transmit 1 drop 2 policeDscpTransmit	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.9
qosAggPolicerStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy	.1.3.6.1.4.1.259.8.1.2.100.11.1.5.1.10

remark new dscp or ip precedence for classified flow

qosSetEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.6.1

qosSetTable list of acce index policyname and classmap name.

Indexes

qosSetPolicyMapName

Column	Syntax	OID
qosSetPolicyMapName QoS Policy name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.1
qosSetClassMapName QoS class map name	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.2
qosSetType qosSetType range:1,2,3,4,5,6,7,8,9 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 nexthop Set IP nexthop; 4 dscp Set IPv6 DSCP (DiffServ CodePoints); 6 flowl…	Enumerationr/w Enumerated Values: 1 dscp 2 precedence 3 nextHop 4 v6Dscp 6 v6FlowLabel 7 v6nextHop 8 cos 9 expimposition	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.3
qosSetdscp remark dscp for the classified flow	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.4
qosSetprecedence remark ip precedence for classified flow	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.5
qosSetnextHop set nexthop for classified flow	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.6
qosSetv6Dscp remark ipv6 dscp for classified flow	Integer32r/w Constraints: range: 0-63 range: 1970-2100	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.7
qosSetv6FlowLabel remark ipv6 flow lable for classified flow	Integer32r/w Constraints: range: 0-1048575 range: 1-12	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.8
qosSetv6nextHop set IPv6 nexthop for classified flow	DisplayStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.9
qosSetCos remark cos for classified flow	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.10
qosSetEXPimposition remark MPLS EXP value for classified flow	Integer32r/w Constraints: range: 0-7 range: 0-23	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.11
qosSetStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy Constraints: range: 0-59	.1.3.6.1.4.1.259.8.1.2.100.11.1.6.1.12

Apply a policy map to the specified port.

qosPortBindEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.7.1

the index of this entry is port-index and policy-map

Indexes

qosPortBindIndex qosPortBindPolicy

Column	Syntax	OID
qosPortBindIndex QoS Port Index	SNMPv2-SMIInteger32 Constraints: range: 1-12	.1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.1
qosPortBindPolicy QoS Policy name	OctetString Constraints: range: 1-16 range: 1-31	.1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.2
qosPortBindType input(1),bind the policy-map to ingress port; output(2),bind the policy-map to egress port; noinput(3),unbind the policy-map to ingress port; nooutput(4), unbind the policy-map to egress port	Enumerationr/w Enumerated Values: 1 input 2 output 3 noinput 4 nooutput	.1.3.6.1.4.1.259.8.1.2.100.11.1.7.1.3

set golbal qos WRR weight

qosPortQueueEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.8.1

set port qos WRR weight,index is port index.

Indexes

qosPortQueueIndex

Column	Syntax	OID
qosPortQueueIndex QoS Port Index	SNMPv2-SMIInteger32 Constraints: range: 0-59	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.1
qosPortQueueWeight1 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.2
qosPortQueueWeight2 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.3
qosPortQueueWeight3 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.4
qosPortQueueWeight4 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.5
qosPortQueueWeight5 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.6
qosPortQueueWeight6 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.7
qosPortQueueWeight7 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.8
qosPortQueueWeight8 WRR weight,range is 0~15.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.9
qosPortQueueStatus Setting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy Constraints: range: 1-32768	.1.3.6.1.4.1.259.8.1.2.100.11.1.8.1.10

COS-Queue map

qosPortCosMapEntry row .1.3.6.1.4.1.259.8.1.2.100.11.1.9.1

COS-Queue map,index is cos-Queue map ID.

Indexes

qosPortCosMapQueueId

Column	Syntax	OID
qosPortCosMapQueueId queue ID	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.1
qosPortCosMapCos1 COS range is 0~7	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.2
qosPortCosMapCos2 COS range is 0~7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.3
qosPortCosMapCos3 COS range is 0~7	SNMPv2-SMIInteger32r/w Constraints: range: 1-64	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.4
qosPortCosMapCos4 COS range is 0~7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.5
qosPortCosMapCos5 COS range is 0~7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.6
qosPortCosMapCos6 COS range is 0~7	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.7
qosPortCosMapCos7 COS range is 0~7	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.8
qosPortCosMapCos8 COS range is 0~7	SNMPv2-SMIInteger32r/w Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.9
qosPortCosMapStatus Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry.	Enumerationr/w Enumerated Values: 1 active 2 destroy Constraints: range: 1-32	.1.3.6.1.4.1.259.8.1.2.100.11.1.9.1.10